diff --git a/etc/examples/nodes/modbus.conf b/etc/examples/nodes/modbus.conf
index f83434954..c1b3952df 100644
--- a/etc/examples/nodes/modbus.conf
+++ b/etc/examples/nodes/modbus.conf
@@ -2,65 +2,163 @@ nodes = {
 	modbus_node = {
 		type = "modbus"
 
-		transport = "tcp" # "tcp"
-		response_timeout = 1.0 # in seconds
+		# Required transport type. Can be either "rtu" or "tcp"
+		transport = "tcp"
 
-		# For transport = tcp
+		# Optional timeout in seconds when waiting for responses from a modbus server.
+		# Default is 1.0.
+		response_timeout = 1.0
+
+
+		#
+		# Settings for transport = "tcp".
+		#
+
+		# Required remote IP address.
 		remote = "127.0.0.1"
-		port = 1502
 
-		# For transport = rtu
+		# Optional remote port.
+		# Default is 502.
+		port = 502
+
+
+		#
+		# Settings for transport = "rtu"
+		#
+
+		# Required device file.
 		device = "/dev/ttyS0"
-		baudrate = 9600
-		parity = "none" # "even" "odd"
-		data_bits = 5 # 6 7 8
-		stop_bits = 1 # 2
 
-		# Modbus device / unit ID
-		# this is optional for TCP
+		# Required baudrate.
+		baudrate = 9600
+
+		# Required parity. One of "none", "even" and "odd"
+		parity = "none"
+
+		# Required data bits. One of 5, 6, 7, 8
+		data_bits = 5
+
+		# Required stop bits. One of 1, 2
+		stop_bits = 1
+
+		# The modbus unit ID.
+		# Required for transport = "rtu".
+		# Optional for transport = "tcp".
 		unit = 1
-		rate = 10 # in Hz
+
+		# Optional polling rate for the modbus remote reads.
+		# Defaults to 10.
+		rate = 10
 
 		in = {
 			signals = (
+				# A 32-bit IEEE 754 floating point value.
+				# This spans 2 registers.
 				{
+					# Required type = "float".
 					type = "float"
+
+					# Required address of the lowest register.
 					address = 0x50
-				},
-				{
-					type = "boolean"
-					address = 0x54
-					bit = 1
-				},
-				{
-					type = "float"
-					address = 0x52
-					integer_registers = 1
+
+					# Optional endianess for joining the 2 16-bit registers into a 32-bit value.
+					# Defaults to "big".
+					word_endianess = "big"
+
+					# Optional endianess for the 2 bytes within a register.
+					# Defaults to "big".
+					byte_endianess = "big"
+
+					# Optional scale that should be applied to the integer value.
+					# Defaults to 1.
 					scale = 10
+
+					# Optional offset that should be applied to the integer value after scaling.
+					# Defaults to 0.
 					offset = 2
 				},
+				# A single bit within a register as a boolean value.
 				{
+					# Required type = "boolean".
 					type = "boolean"
+
+					# Required address of the register.
 					address = 0x54
+
+					# Required bit within the register.
+					# Starting at 0.
 					bit = 0
 				},
+				# An integer value.
+				# This may span multiple registers.
 				{
+					# Required type = "integer".
+					type = "integer"
+
+					# Required address of the lowest register.
+					address = 0x52
+
+					# Optional number of registers that should be joined to form the value.
+					# Defaults to 1.
+					integer_registers = 1
+
+					# Optional endianess for joining the 16-bit registers into a 32-bit value.
+					# Defaults to "big".
+					word_endianess = "big"
+
+					# Optional endianess for the 2 bytes within a register.
+					# Defaults to "big".
+					byte_endianess = "big"
+				},
+				# An float value created by reading an integer and applying an optional offset and scale.
+				# This may span multiple registers.
+				{
+					# Required type = "float".
 					type = "float"
-					address = 0x01
-					scale = 2
-					offset = 10
+
+					# Required address of the lowest register.
+					address = 0x52
+
+					# Required number of registers that should be joined to form the value.
+					# A "float" value without the "integer_registers" settings is considered an IEEE 754 float, spanning 2 registers.
+					integer_registers = 1
+
+					# Optional endianess for joining the 16-bit registers into a 32-bit value.
+					# Defaults to "big".
+					word_endianess = "big"
+
+					# Optional endianess for the 2 bytes within a register.
+					# Defaults to "big".
+					byte_endianess = "big"
+
+					# Optional scale that should be applied to the integer value.
+					# Defaults to 1.
+					scale = 10
+
+					# Optional offset that should be applied to the integer value after scaling.
+					# Defaults to 0.
+					offset = 2
 				}
 			)
 		}
 
 		out = {
 			signals = (
+				# All register mappings described for "in" except for "boolean" are supported in the "out" signals.
 				{
 					type = "float"
-					address = 0x01
-					scale = 2
-					offset = 10
-				}
+					address = 0x50
+
+					# Scale and offset a applied as attributes of the register that is written to.
+					# This means the value written to "register" for a "signal" with "offset" and "scale" will be:
+					#
+					#   register = (signal - offset) / scale
+					#
+					# It is fairly common to specify a scale and offset for modbus registers in a device manual.
+					# You should be able to plug those values into this configuration without conversion.
+					scale = 10
+					offset = 2
+				},
 			)
 		}
 	}