This lets you find out the SMP Thread Service Index (tsi) that a wsi
is bound to. This allows you to, eg, filter a global wsi list so
you can find the ones that exist in your service thread context.
Event lib support as it has been isn't scaling well, at the low level
libevent and libev headers have a namespace conflict so they can't
both be built into the same image, and at the distro level, binding
all the event libs to libwebsockets.so makes a bloaty situation for
packaging, lws will drag in all the event libs every time.
This patch implements the plan discussed here
https://github.com/warmcat/libwebsockets/issues/1980
and refactors the event lib support so they are built into isolated
plugins and bound at runtime according to what the application says
it wants to use. The event lib plugins can be packaged individually
so that only the needed sets of support are installed (perhaps none
of them if the user code is OK with the default poll() loop). And
dependent user code can mark the specific event loop plugin package
as required so pieces are added as needed.
The eventlib-foreign example is also refactored to build the selected
lib support isolated.
A readme is added detailing the changes and how to use them.
https://libwebsockets.org/git/libwebsockets/tree/READMEs/README.event-libs.md
Currently we always reserve a fakewsi per pt so events that don't have a related actual
wsi, like vhost-protocol-init or vhost cert init via protocol callback can make callbacks
that look reasonable to user protocol handler code expecting a valid wsi every time.
This patch splits out stuff that user callbacks often unconditionally expect to be in
a wsi, like context pointer, vhost pointer etc into a substructure, which is composed
into struct lws at the top of it. Internal references (struct lws is opaque, so there
are only internal references) are all updated to go via the substructre, the compiler
should make that a NOP.
Helpers are added when fakewsi is used and referenced.
If not PLAT_FREERTOS, we continue to provide a full fakewsi in the pt as before,
although the helpers improve consistency by zeroing down the substructure. There is
a huge amount of user code out there over the last 10 years that did not always have
the minimal examples to follow, some of it does some unexpected things.
If it is PLAT_FREERTOS, that is a newer thing in lws and users have the benefit of
being able to follow the minimal examples' approach. For PLAT_FREERTOS we don't
reserve the fakewsi in the pt any more, saving around 800 bytes. The helpers then
create a struct lws_a (the substructure) on the stack, zero it down (but it is only
like 4 pointers) and prepare it with whatever we know like the context.
Then we cast it to a struct lws * and use it in the user protocol handler call.
In this case, the remainder of the struct lws is undefined. However the amount of
old protocol handlers that might touch things outside of the substructure in
PLAT_FREERTOS is very limited compared to legacy lws user code and the saving is
significant on constrained devices.
User handlers should not be touching everything in a wsi every time anyway, there
are several cases where there is no valid wsi to do the call with. Dereference of
things outside the substructure should only happen when the callback reason shows
there is a valid wsi bound to the activity (as in all the minimal examples).
Until now if the generic transaction completes and the connection is idle,
there's a fixed 5s grace period to keep the connection up in case something
else wants it.
This allows setting it in the client creation info struct .keep_warm_secs.
If left at 0, then it maintains the backward-compatible 5s wait.
By default this doesn't change any existing logging behaviour at all.
But it allows you to define cmake options to force or force-disable the
build of individual log levels using new cmake option bitfields
LWS_LOGGING_BITFIELD_SET and LWS_LOGGING_BITFIELD_CLEAR.
Eg, -DLWS_LOGGING_BITFIELD_SET="(LLL_INFO)" can force INFO log level
built even in release mode. -DLWS_LOGGING_BITFIELD_CLEAR="(LLL_NOTICE)"
will likewise remove NOTICE logging from the build regardless of
DEBUG or RELEASE mode.
GCC -fanalyzer did find a real issue (unchecked malloc return)
but it mainly reported things that weren't true due to what
was happening outside of the particular compilation unit that
it could see.
This leads to problems at the moment with sticky mux.requested_POLLOUT
causing writeable to not be sent.
Remove it and always set writeable on parents for now.
Adds client support for MQTT QoS0 and QoS1, compatible with AWS IoT
Supports stream binding where independent client connections to the
same endpoint can mux on a single tcp + tls connection with topic
routing managed internally.
This adds support for POST in both h1 and h2 queues / stream binding.
The previous queueing tried to keep the "leader" wsi who made the
actual connection around and have it act on the transaction queue
tail if it had done its own thing.
This refactors it so instead, who is the "leader" moves down the
queue and the queued guys inherit the fd, SSL * and queue from the
old leader as they take over.
This lets them operate in their own wsi identity directly and gets
rid of all the "effective wsi" checks, which was applied incompletely
and getting out of hand considering the separate lws_mux checks for
h2 and other muxed protocols alongside it.
This change also allows one wsi at a time to own the transaction for
POST. --post is added as an option to lws-minimal-http-client-multi
and 6 extra selftests with POST on h1/h2, pipelined or not and
staggered or not are added to the CI.
This provides support to build lws using the linkit 7697 public SDK
from here https://docs.labs.mediatek.com/resource/mt7687-mt7697/en/downloads
This toolchain has some challenges, its int32_t / uint32_t are long,
so assumptions about format strings for those being %u / %d / %x all
break. This fixes all the cases for the features enabled by the
default cmake settings.
This changes the approach of tx credit management to set the
initial stream tx credit window to zero. This is the only way
with RFC7540 to gain the ability to selectively precisely rx
flow control incoming streams.
At the time the headers are sent, a WINDOW_UPDATE is sent with
the initial tx credit towards us for that specific stream. By
default, this acts as before with a 256KB window added for both
the stream and the nwsi, and additional window management sent
as stuff is received.
It's now also possible to set a member in the client info
struct and a new option LCCSCF_H2_MANUAL_RXFLOW to precisely
manage both the initial tx credit for a specific stream and
the ongoing rate limit by meting out further tx credit
manually.
Add another minimal example http-client-h2-rxflow demonstrating how
to force a connection's peer's initial budget to transmit to us
and control it during the connection lifetime to restrict the amount
of incoming data we have to buffer.
This should be a NOP for h2 support and only affects internal
apis. But it lets us reuse the working and reliable h2 mux
arrangements directly in other protocols later, and share code
so building for h2 + new protocols can take advantage of common
mux child handling struct and code.
Break out common mux handling struct into its own type.
Convert all uses of members that used to be in wsi->h2 to wsi->mux
Audit all references to the members and break out generic helpers
for anything that is useful for other mux-capable protocols to
reuse wsi->mux related features.
h1 and h2 has a bunch of code supporting autobinding outgoing client connections
to be streams in, or queued as pipelined on, the same / existing single network
connection, if it's to the same endpoint.
Adapt this http-specific code and active connection tracking to be usable for
generic muxable protocols the same way.
It was already correct but add helpers to isolate and deduplicate
processing adding and closing a generically immortal stream.
Change the default 31s h2 network connection timeout to be settable
by .keepalive_timeout if nonzero.
Add a public api allowing a client h2 stream to transition to
half-closed LOCAL (by sending a 0-byte DATA with END_STREAM) and
mark itself as immortal to create a read-only long-poll stream
if the server allows it.
Add a vhost server option flag LWS_SERVER_OPTION_VH_H2_HALF_CLOSED_LONG_POLL
which allows the vhost to treat half-closed remotes as immortal long
poll streams.
Remove LWS_LATENCY.
Add the option LWS_WITH_DETAILED_LATENCY, allowing lws to collect very detailed
information on every read and write, and allow the user code to provide
a callback to process events.
wsi timeout, wsi hrtimer, sequencer timeout and vh-protocol timer
all now participate on a single sorted us list.
The whole idea of polling wakes is thrown out, poll waits ignore the
timeout field and always use infinite timeouts.
Introduce a public api that can schedule its own callback from the event
loop with us resolution (usually ms is all the platform can do).
Upgrade timeouts and sequencer timeouts to also be able to use us resolution.
Introduce a prepared fakewsi in the pt, so we don't have to allocate
one on the heap when we need it.
Directly handle vh-protocol timer if LWS_MAX_SMP == 1
https://github.com/warmcat/libwebsockets/issues/1550
rx flow control needs to handle the situation that it is draining from
a previous rx flow control period, and the user code reasserts rx flow
control partway through that.
The accounting for the used rx then boils down to only trimming the
rxflow buflist we were "replaying" to consume however much we managed
to deliver of that this time before the rx flow control came again.
"Normal" rx consumption is wrong in this case, since we accounted for
it entirely in the rxflow cache buflist.
The patch recognizes this situation, does the accounting in the cache
buflist, and then lies to the caller that there was no rx consumption
to be accounted for at his level.
If you have multiple vhosts with client contexts enabled, under
OpenSSL each one brings in the system cert bundle.
On libwebsockets.org, there are many vhosts and the waste adds up
to about 9MB of heap.
This patch makes a sha256 from the client context configuration, and
if a suitable client context already exists on another vhost, bumps
a refcount and reuses the client context.
In the case client contexts are configured differently, a new one
is created (and is available for reuse as well).
