OSX changed to blow a segfault on write to .rodata, exposing that
we're dropping a NUL in what can be .rodata to set the environment
manually. We don't do this on Linux typically because we take the
code path where execvpe() is available to do the env for us.
Adapt the code to treat it as const, and underscore it by changing
its type to be const char ** in the info struct.
This creates a role for RFC3549 Netlink monitoring.
If the OS supports it (currently, linux) then each pt creates a wsi
with the netlink role and dumps the current routing table at pt init.
It then maintains a cache of the routing table in each pt.
Upon routing table changes an SMD message is issued as an event, and
Captive Portal Detection is triggered.
All of the pt's current connections are reassessed for routability under
the changed routing table, those that no longer have a valid route or
gateway are closed.
The type of the fields in rtentry is sockaddr, and it is
casted to sockaddr_in. Size-wise it is ok, they should both
be the same size. But casting a pointer breaks build with
optimizations with the following error:
unix-sockets.c:434: error: dereferencing pointer 'addr' does break strict-aliasing rules
Amends commit 3c95483518.
Event lib support as it has been isn't scaling well, at the low level
libevent and libev headers have a namespace conflict so they can't
both be built into the same image, and at the distro level, binding
all the event libs to libwebsockets.so makes a bloaty situation for
packaging, lws will drag in all the event libs every time.
This patch implements the plan discussed here
https://github.com/warmcat/libwebsockets/issues/1980
and refactors the event lib support so they are built into isolated
plugins and bound at runtime according to what the application says
it wants to use. The event lib plugins can be packaged individually
so that only the needed sets of support are installed (perhaps none
of them if the user code is OK with the default poll() loop). And
dependent user code can mark the specific event loop plugin package
as required so pieces are added as needed.
The eventlib-foreign example is also refactored to build the selected
lib support isolated.
A readme is added detailing the changes and how to use them.
https://libwebsockets.org/git/libwebsockets/tree/READMEs/README.event-libs.md
Move the common plugin scanning dir stuff to be based on lws_dir, which
already builds for windows. Previously this was done via dirent for unix
and libuv for windows.
Reduce the dl plat stuff to just wrap instantiation and destruction of
dynlibs, establish common code in lib/misc/dir.c for plugin scanning
itself.
Migrate the libuv windows dl stuff to windows-plugins.c, so that he's
available even if later libuv loop support becomes and event lib plugin.
Remove the existing api exports scheme for plugins, just export a const struct
now which has a fixed header type but then whatever you want afterwards depending
on the class / purpose of the plugin. Place a "class" string in the header so
there can be different kinds of plugins implying different types exported.
Make the plugin apis public and add support for filter by class string, and
per instantation / destruction callbacks so the subclassed header type can
do its thing for the plugin class. The user provides a linked-list base
for his class of plugins, so he can manage them completely separately and
in user code / user export types.
Rip out some last hangers-on from generic sessions / tables.
This is all aimed at making the plugins support general enough so it can
provide event lib plugins later.
Although it's already included in lws esp-idf freertos case, in some
other freertos environments it's necessary to explicitly include
the semaphore header.
We don't actually check that it provided results... return diags and
that the interface is usable if it didn't.
Also explicitly check ifa_name for being NULL, since it seems some
platforms can do that even with an ifa_addr (thanks to Jed)
Currently we always reserve a fakewsi per pt so events that don't have a related actual
wsi, like vhost-protocol-init or vhost cert init via protocol callback can make callbacks
that look reasonable to user protocol handler code expecting a valid wsi every time.
This patch splits out stuff that user callbacks often unconditionally expect to be in
a wsi, like context pointer, vhost pointer etc into a substructure, which is composed
into struct lws at the top of it. Internal references (struct lws is opaque, so there
are only internal references) are all updated to go via the substructre, the compiler
should make that a NOP.
Helpers are added when fakewsi is used and referenced.
If not PLAT_FREERTOS, we continue to provide a full fakewsi in the pt as before,
although the helpers improve consistency by zeroing down the substructure. There is
a huge amount of user code out there over the last 10 years that did not always have
the minimal examples to follow, some of it does some unexpected things.
If it is PLAT_FREERTOS, that is a newer thing in lws and users have the benefit of
being able to follow the minimal examples' approach. For PLAT_FREERTOS we don't
reserve the fakewsi in the pt any more, saving around 800 bytes. The helpers then
create a struct lws_a (the substructure) on the stack, zero it down (but it is only
like 4 pointers) and prepare it with whatever we know like the context.
Then we cast it to a struct lws * and use it in the user protocol handler call.
In this case, the remainder of the struct lws is undefined. However the amount of
old protocol handlers that might touch things outside of the substructure in
PLAT_FREERTOS is very limited compared to legacy lws user code and the saving is
significant on constrained devices.
User handlers should not be touching everything in a wsi every time anyway, there
are several cases where there is no valid wsi to do the call with. Dereference of
things outside the substructure should only happen when the callback reason shows
there is a valid wsi bound to the activity (as in all the minimal examples).
The old esp32 -factory stuff along with the lws support doesn't have a
future in its old form. It has users but the ratio of effort to
contribution is really especially bad. I haven't updated it for more
than a year since esp-idf changes broke the original stuff.
Freertos plat is alive and well and getting a lot of new use, ESP-32 is
supported both there and by modern lws_drivers pieces, including in CI
on real hardware, any further effort will be invested in that direction
instead of more vendor api-specific code (outside of wrapper
implementation).
lws_drivers wraps any SDK apis in generic lws apis such that your code
just uses those, enabling it to become SDK / SoC / vendor independent.
Its first implementation is on esp-idf, the low and mid-level features
that were in the old -factory are already available using that and
new technologies like lws_struct and Secure Streams.
Add lws_display and minimal example support for esp32-wrover to match wsp32-heltec-wb32
Since no usable buttons that don't affect something else on wrover kit, assumes
a button to 0V on GPIO14.
- Add low level system message distibution framework
- Add support for local Secure Streams to participate using _lws_smd streamtype
- Add apit test and minimal example
- Add SS proxy support for _lws_smd
See minimal-secure-streams-smd README.md
Now there's an abstract button class regardless of the underlying
connection, we can add more sophicsticated analysis on top of it
for processing its usually noisy events and classifying them into
smd-ready click, long-click or double-click events.
A "regime" defines the timing limits for different press recognition
and can be specified per-button, if not given a default regime is
applied.
Make a start on generic peripheral and bus drivers to provide
meta-functionality regardless of platform.
On the one hand this simply provides...
- bitbang i2c on top of esp-idf gpio apis
- ssd1306 oled chip driver as found on Heltec WB32
- modifications to the minimal example test for esp32 to use that
... on the other hand, those capabilities are provided by creating:
- an abstract i2c class object
- an abstract gpio class object
- i2c class implementation using the abstract gpio for bitbang
- an abstract display class object
- an abstract display state (brightness, animated change,
on/off/init tracking, autodim after inactive, auto-off /
blanking after inactive)
... with the intention, eg, you only have to add a platform
implementation for the gpio to be able to use the i2c-based
display drivers and state handling, and i2c bitbang, without
any other modifications.
Adapt the pt sul owner list to be an array, and define two different lists,
one that acts like before and is the default for existing users, and another
that has the ability to cooperate with systemwide suspend to restrict the
interval spent suspended so that it will wake in time for the earliest
thing on this wake-suspend sul list.
Clean the api a bit and add lws_sul_cancel() that only needs the sul as the
argument.
Add a flag for client creation info to indicate that this client connection
is important enough that, eg, validity checking it to detect silently dead
connections should go on the wake-suspend sul list. That flag is exposed in
secure streams policy so it can be added to a streamtype with
"swake_validity": true
Deprecate out the old vhost timer stuff that predates sul. Add a flag
LWS_WITH_DEPRECATED_THINGS in cmake so users can get it back temporarily
before it will be removed in a v4.2.
Adapt all remaining in-tree users of it to use explicit suls.
Allow selection of Unix Domain Sockets on windows since it is supported
for the last couple of years on windows 10
https://devblogs.microsoft.com/commandline/af_unix-comes-to-windows/
... if only they could add a full set of posix pieces to go with it
(and abstract namespace UDS which doesn't work apparently) so that
the parts dealing with uid / gid don't have to be disabled.
Establish a new distributed CMake architecture with CMake code related to
a source directory moving to be in the subdir in its own CMakeLists.txt.
In particular, there's now one in ./lib which calls through to ones
further down the directory tree like ./lib/plat/xxx, ./lib/roles/xxx etc.
This cuts the main CMakelists.txt from 98KB -> 33KB, about a 66% reduction,
and it's much easier to maintain sub-CMakeLists.txt that are in the same
directory as the sources they manage, and conceal all the details that that
level.
Child CMakelists.txt become responsible for:
- include_directories() definition (this is not supported by CMake
directly, it passes it back up via PARENT_SCOPE vars in helper
macros)
- Addition child CMakeLists.txt inclusion, for example toplevel ->
role -> role subdir
- Source file addition to the build
- Dependent library path resolution... this is now a private thing
in the child CMakeLists.txt, it just passes back any adaptations
to include_directories() and the LIB_LIST without filling the
parent namespace with the details
Esp-idf has an improved but still kind of abused cmake-
based build system now.
If we see ESP_PLATFORM coming as a cmake var, we can know we
are being built from inside the esp-idf config system.
Leave the existing esp32 arrangements alone but triggered off
ESP_PLATFORM, adapt to use the cross toolchain file and
various quirks automatically.
In this way you can build lws a part of your project in a
much cleaner way.
Prepare a minimal esp32 test app for use in Sai
Adapt .sai.json to build for esp32
POSIX connect() specifies it will signal POLLOUT available when
the connect result is available. But windows has some non-posix
nonsense.
Improve the plat support to simulate the missing POLLOUT.
Add a member to the vh init struct allowing control of the overall
connection wait introduced in an earlier patch. Set it to 20s
by default.
The timeout_secs member controls the individual DNS result
connect timeout and is reduced to 5s by default.
Replace the bash selftest plumbing with CTest.
To use the selftests, build with -DLWS_WITH_MINIMAL_EXAMPLES=1
and `CTEST_OUTPUT_ON_FAILURE=1 make test` or just
`make test`.
To disable tests that require internet access, also give
-DLWS_CTEST_INTERNET_AVAILABLE=0
Remove travis and appveyor scripts on master.
Remove travis and appveyor decals on README.md.
