If you encounter an h1 transaction with no content length and you
parsed the headers, it actually means a hangup subsequently is an
indication of a correct transaction completion. So take care to
do the _COMPLETION callback under those circumstances too.
Unlike any other sockaddr variant it turns out when sockaddr_un reports its
sizeof() to connect() or listen(), it is trimmed to the used length of the
sun_path[] member not including any trailing 0x00.
Until now we worked fine, but our actual UDS paths have a large number of
trailing 0x00 (shown as @ in most tools). Clients and servers can still
interoperate if they both have this broken name.
This patch fixes it to trim the sockaddr_un to the path length so the name
is as you would expect.
If a user sets a default filename for a http mount (.def in lws_http_mount),
eg. 'default.html', then a GET request for '/' correctly forwards to
'/default.html'.
However, without this commit the default filename is not taken into account for subdirectories. Thus,
GET subdir/
will forward to
'subdir/index.html'
instead of the expected
'subdir/default.html'
This commit changes the behavior such that the user-provided default filename is also used for subdirectories.
Secure Streams is an optional layer on top of lws that separates policy
like endpoint selection and tls cert validation into a device JSON
policy document.
Code that wants to open a client connection just specifies a streamtype name,
and no longer deals with details like the endpoint, the protocol (!) or anything
else other than payloads and optionally generic metadata; the JSON policy
contains all the details for each streamtype. h1, h2, ws and mqtt client
connections are supported.
Logical secure streams outlive any particular connection and supports "nailed-up"
connectivity regardless of underlying connection stability.
Adds client support for MQTT QoS0 and QoS1, compatible with AWS IoT
Supports stream binding where independent client connections to the
same endpoint can mux on a single tcp + tls connection with topic
routing managed internally.
Headers related to ws or h2 are now elided if the ws or h2 role
is not enabled for build. In addition, a new build-time option
LWS_WITH_HTTP_UNCOMMON_HEADERS on by default allows removal of
less-common http headers to shrink the parser footprint.
Minilex is adapted to produce 8 different versions of the lex
table, chosen at build-time according to which headers are
included in the build.
If you don't need the unusual headers, or aren't using h2 or ws,
this chops down the size of the ah and the rodata needed to hold
the parsing table from 87 strings / pointers to 49, and the
parsing table from 1177 to 696 bytes.
The vfork optimized spawn, stdxxx and terminal handling in the cgi
implementation is quite mature and sophisticated, and useful for
other things unrelated to cgi. Break it out into its own public
api under LWS_WITH_SPAWN, off by default.
Expand it so the parent wsi is optional, and the role and protocol
bindings for stdxxx pipes can be set. Allow optional sul timeout
and external lws_dll2 owner for extant children.
Remove inline style from minimal http-server-cgi
This adds support for POST in both h1 and h2 queues / stream binding.
The previous queueing tried to keep the "leader" wsi who made the
actual connection around and have it act on the transaction queue
tail if it had done its own thing.
This refactors it so instead, who is the "leader" moves down the
queue and the queued guys inherit the fd, SSL * and queue from the
old leader as they take over.
This lets them operate in their own wsi identity directly and gets
rid of all the "effective wsi" checks, which was applied incompletely
and getting out of hand considering the separate lws_mux checks for
h2 and other muxed protocols alongside it.
This change also allows one wsi at a time to own the transaction for
POST. --post is added as an option to lws-minimal-http-client-multi
and 6 extra selftests with POST on h1/h2, pipelined or not and
staggered or not are added to the CI.
(Includes fixes from Yichen Gu)
Currently the incoming ebuf is always replaced to point to either a whole
buflist segment, or up to the (pt_serv_buf - LWS_PRE) length in the pt_serv_buf.
This is called on path for handling http read... some user code reasonably wants to
restrict the read size to what it can handle.
Change the other lws_buflist_aware_read() callers to zero ebuf before calling, and for
those have it keep the current behaviour; but if non-NULL ebuf.token on incoming, as
in http read path case, restrict both reported len of buflist content and the read length
to the incoming ebuf.len so the user code can control what it will get at one time.
Additionally muxed protocol wsi have no choice but to read what was sent to them
since it's HOL-blocking for other streams and its own WINDOW_UPDATEs. So add an
internal param to lws_buflist_aware_read() forcing read even if buflist content
is available.
This provides support to build lws using the linkit 7697 public SDK
from here https://docs.labs.mediatek.com/resource/mt7687-mt7697/en/downloads
This toolchain has some challenges, its int32_t / uint32_t are long,
so assumptions about format strings for those being %u / %d / %x all
break. This fixes all the cases for the features enabled by the
default cmake settings.
There are some minor public api type improvements rather than cast everywhere
inside lws and user code to work around them... these changed from int to
size_t
- lws_buflist_use_segment() return
- lws_tokenize_t .len and .token_len
- lws_tokenize_cstr() length
- lws_get_peer_simple() namelen
- lws_get_peer_simple_fd() namelen, int fd -> lws_sockfd_type fd
- lws_write_numeric_address() len
- lws_sa46_write_numeric_address() len
These changes are typically a NOP for user code
This changes the approach of tx credit management to set the
initial stream tx credit window to zero. This is the only way
with RFC7540 to gain the ability to selectively precisely rx
flow control incoming streams.
At the time the headers are sent, a WINDOW_UPDATE is sent with
the initial tx credit towards us for that specific stream. By
default, this acts as before with a 256KB window added for both
the stream and the nwsi, and additional window management sent
as stuff is received.
It's now also possible to set a member in the client info
struct and a new option LCCSCF_H2_MANUAL_RXFLOW to precisely
manage both the initial tx credit for a specific stream and
the ongoing rate limit by meting out further tx credit
manually.
Add another minimal example http-client-h2-rxflow demonstrating how
to force a connection's peer's initial budget to transmit to us
and control it during the connection lifetime to restrict the amount
of incoming data we have to buffer.
This should be a NOP for h2 support and only affects internal
apis. But it lets us reuse the working and reliable h2 mux
arrangements directly in other protocols later, and share code
so building for h2 + new protocols can take advantage of common
mux child handling struct and code.
Break out common mux handling struct into its own type.
Convert all uses of members that used to be in wsi->h2 to wsi->mux
Audit all references to the members and break out generic helpers
for anything that is useful for other mux-capable protocols to
reuse wsi->mux related features.
On some platforms, it's possible that logging flow may reset errno. In the case where
we try to log errno on those platforms and afterwards try to query it, we will get a
nasty surprise that the logged errno is destroyed by the time we come to test it.
In the two cases of this in the tree at the moment, sample errno into a temp and
log and test the temp.
Thanks to Sakthi Ramabadran for finding this.
