Fixed updating the command phase register twice for the
flash devices that require four address cycles.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
Remove the integer.h file FSBL src as it is present as a part of xilffs library.
Signed-off-by: Krishna Chaitanya <kpataka@xilinx.com>
Acked-by: Nirmala Pelluri <nirmala@xilinx.com>
Fallback support for AES encryption with Efuse - Enhancement
Disabling the cache for fallback cases after authentication failure
Signed-off-by: Krishna Chaitanya <kpataka@xilinx.com>
Acked-by: Nirmala Pelluri <nirmala@xilinx.com>
Checksum Offset value for calculation for MD5 checksum
is modified to take the relative address from the
image start address instead of exact offset specified
in partition header.
Signed-off-by: Krishna Chaitanya <kpataka@xilinx.com>
Acked-by: Nirmala Pelluri <nirmala@xilinx.com>
This patch make changes for IAR compiler in default
handler routine for data abort and prefetch abort.
Also it contains one modification in xil_cache.c for
correct register in Xil_DCacheInvalidateRange routine
for IAR compiler.
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch fixes issue of "unknown type name u32" for xil_mmu.h
file by including xil_types.h in xil_mmu.h
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch fixes issue of incorrect reset value of event
counter in Xpm_ResetEventCounters function in src/cortexa9/xpm_counter.c file
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
Added new APIs for offset compensation, clippling, clampling,
coefficients, throughput monitor and get version
Added examples
Signed-off-by: Shadul Shaikh <shaduls@xilinx.com>
Acked-by: Srikanth Vemula <svemula@xilinx.com>
When enabling slave monitor, clear FIFO, set to read mode and
set transfer size register to 0.
Disable NACK interrupt to avoid being interrupted on every retry.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Revert changes in existing version of driver. New minor version
needs to be created.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Updated the permissions of sources files[c/h] in src and misc
folder to 644.
Signed-off-by: Krishna Chaitanya <kpataka@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
Added source files, integration files, self test example,
mdd and tcl files to cfa driver.
Signed-off-by: Shravan Kumar A <skumara@xilinx.com>
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Srikanth Vemula <svemula@xilinx.com>
Added source files, integration files, self test example,
mdd and tcl files to enhance driver.
Signed-off-by: Shravan Kumar A <skumara@xilinx.com>
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Srikanth Vemula <svemula@xilinx.com>
When enabling slave monitor, clear FIFO, enable read mode and clear
the transfer size register.
NACK interrupt should not be enabled as this will lead to the sw
being interrupted everytime a retry fails.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
This patch uses the data typess from stdint.h (in the toolchain
instead of type defining standard data types. This addition
makes the file xil_types.h independent of 32/64-bit platform.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch adds notes for the Xil_ExceptionInit function for
modification of exception handler initilization.
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch fixes issue of multiple definition of function in
toolchain and BSP for some special cases.
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch fixes the issue of improper linking of translation_table.s
by changing the cortexa9/armcc/Makefile
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch enables asynchronous abort exception in boot.s and
adds default exception handler for data abort and prefetch abort
for debug purpose.
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch fixes issue of IAR compilation error of standalone BSP for cortexa9
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch fixes the issues in the xilkernel tcl file
Using MB & Xilkernal with config_bufmalloc with config_msgq fails with unclear error
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch fixes the issue of wrong interrupt being
get exported to the xemacltie_topolgy_g.c file
in the lwip.
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
There is an issue with HSM TCL in LWIP, which fails to parse the
BSP name properly and hence Xilkernel/FreeRTOS BSP doesn't compile
if LwIP library is added with SOCKET_API mode enabled. This patch
fixes this issue by correcting the LWIP tcl.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch removes this line and doing so it allows to output the
xdbg_printf() debug logs when -DDEBUG flag is enabled for BSP.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch adds support for iar compiler into standalone BSP for cortexa9
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>