/******************************************************************************
*
* Copyright (C) 2010 - 2014 Xilinx, Inc. All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/*****************************************************************************/
/**
* @file xttcps_rtc_example.c
*
* This example uses one timer/counter to make a real time clock. The number of
* minutes and seconds is displayed on the console.
*
*
* @note
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver Who Date Changes
* ---- ------ -------- ---------------------------------------------
* 1.00 drg/jz 01/23/10 First release
*</pre>
******************************************************************************/
/***************************** Include Files *********************************/
#include <stdio.h>
#include <stdlib.h>
#include "xparameters.h"
#include "xstatus.h"
#include "xil_io.h"
#include "xil_exception.h"
#include "xttcps.h"
#include "xscugic.h"
#include "xil_printf.h"
/************************** Constant Definitions *****************************/
/*
* The following constants map to the XPAR parameters created in the
* xparameters.h file. They are only defined here such that a user can easily
* change all the needed parameters in one place.
*/
#define TTC_TICK_DEVICE_ID XPAR_XTTCPS_0_DEVICE_ID
#define TTC_TICK_INTR_ID XPAR_XTTCPS_0_INTR
#define INTC_DEVICE_ID XPAR_SCUGIC_SINGLE_DEVICE_ID
/*
* Constants to set the basic operating parameters.
* PWM_DELTA_DUTY is critical to the running time of the test. Smaller values
* make the test run longer.
*/
#define TICK_TIMER_FREQ_HZ 100 /* Tick timer counter's output frequency */
#define TICKS_PER_CHANGE_PERIOD TICK_TIMER_FREQ_HZ /* Tick signals per update */
/**************************** Type Definitions *******************************/
typedef struct {
u32 OutputHz; /* Output frequency */
u16 Interval; /* Interval value */
u8 Prescaler; /* Prescaler value */
u16 Options; /* Option settings */
} TmrCntrSetup;
/***************** Macros (Inline Functions) Definitions *********************/
/************************** Function Prototypes ******************************/
static int TmrRtcInterruptExample(void); /* Main test */
/* Set up routines for timer counters */
static int SetupTicker(void);
static int SetupTimer(int DeviceID);
/* Interleaved interrupt test for both timer counters */
static int WaitForDutyCycleFull(void);
static int SetupInterruptSystem(u16 IntcDeviceID, XScuGic *IntcInstancePtr);
static void TickHandler(void *CallBackRef);
/************************** Variable Definitions *****************************/
static XTtcPs TtcPsInst; /* Timer counter instance */
static TmrCntrSetup SettingsTable=
{TICK_TIMER_FREQ_HZ, 0, 0, 0}; /* Ticker timer counter initial setup,
only output freq */
XScuGic InterruptController; /* Interrupt controller instance */
static u8 ErrorCount; /* Errors seen at interrupt time */
static volatile u8 UpdateFlag; /* Flag to update the seconds counter */
static u32 TickCount; /* Ticker interrupts between seconds change */
/*****************************************************************************/
/**
*
* This is the main function that calls the TTC RTC interrupt example.
*
* @param None
*
* @return
* - XST_SUCCESS to indicate Success
* - XST_FAILURE to indicate a Failure.
*
* @note None.
*
*****************************************************************************/
int main(void)
{
int Status;
xil_printf("Starting Timer RTC Example");
Status = TmrRtcInterruptExample();
if (Status != XST_SUCCESS) {
xil_printf("FAIL!");
return XST_FAILURE;
}
xil_printf("Success!");
return XST_SUCCESS;
}
/*****************************************************************************/
/**
*
* This is the main function of the interrupt example.
*
*
* @param None.
*
* @return XST_SUCCESS to indicate success, else XST_FAILURE to indicate
* a Failure.
*
****************************************************************************/
static int TmrRtcInterruptExample(void)
{
int Status;
/*
* Make sure the interrupts are disabled, in case this is being run
* again after a failure.
*/
/*
* Connect the Intc to the interrupt subsystem such that interrupts can
* occur. This function is application specific.
*/
Status = SetupInterruptSystem(INTC_DEVICE_ID, &InterruptController);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Set up the Ticker timer
*/
Status = SetupTicker();
if (Status != XST_SUCCESS) {
return Status;
}
Status = WaitForDutyCycleFull();
if (Status != XST_SUCCESS) {
return Status;
}
/*
* Stop the counters
*/
XTtcPs_Stop(&TtcPsInst);
return XST_SUCCESS;
}
/****************************************************************************/
/**
*
* This function sets up the Ticker timer.
*
* @param None
*
* @return XST_SUCCESS if everything sets up well, XST_FAILURE otherwise.
*
*****************************************************************************/
int SetupTicker(void)
{
int Status;
TmrCntrSetup *TimerSetup;
XTtcPs *TtcPsTick;
TimerSetup = &SettingsTable;
/*
* Set up appropriate options for Ticker: interval mode without
* waveform output.
*/
TimerSetup->Options |= (XTTCPS_OPTION_INTERVAL_MODE |
XTTCPS_OPTION_WAVE_DISABLE);
/*
* Calling the timer setup routine
* . initialize device
* . set options
*/
Status = SetupTimer(TTC_TICK_DEVICE_ID);
if(Status != XST_SUCCESS) {
return Status;
}
TtcPsTick = &TtcPsInst;
/*
* Connect to the interrupt controller
*/
Status = XScuGic_Connect(&InterruptController, TTC_TICK_INTR_ID,
(Xil_InterruptHandler)TickHandler, (void *)TtcPsTick);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Enable the interrupt for the Timer counter
*/
XScuGic_Enable(&InterruptController, TTC_TICK_INTR_ID);
/*
* Enable the interrupts for the tick timer/counter
* We only care about the interval timeout.
*/
XTtcPs_EnableInterrupts(TtcPsTick, XTTCPS_IXR_INTERVAL_MASK);
/*
* Start the tick timer/counter
*/
XTtcPs_Start(TtcPsTick);
return Status;
}
/****************************************************************************/
/**
*
* This function uses the interrupt inter-locking between the ticker timer
* counter and the waveform output timer counter. When certain amount of
* interrupts have happened to the ticker timer counter, a flag, UpdateFlag,
* is set to true.
*
*
* @param None
*
* @return XST_SUCCESS if duty cycle successfully reaches beyond 100,
* otherwise XST_FAILURE.
*
*****************************************************************************/
int WaitForDutyCycleFull(void)
{
u32 seconds;
/*
* Initialize some variables used by the interrupts and in loops.
*/
ErrorCount = 0;
seconds = 0;
/*
* Loop until two minutes passes.
*/
while (seconds <= 121) {
/*
* If error occurs, disable interrupts, and exit.
*/
if (0 != ErrorCount) {
return XST_FAILURE;
}
/*
* The Ticker interrupt sets a flag for update.
*/
if (UpdateFlag) {
/*
* Calculate the time setting here, not at the time
* critical interrupt level.
*/
seconds++;
UpdateFlag = FALSE;
xil_printf("Time: %d\n\r", seconds);
}
}
return XST_SUCCESS;
}
/****************************************************************************/
/**
*
* This function sets up a timer counter device, using the information in its
* setup structure.
* . initialize device
* . set options
* . set interval and prescaler value for given output frequency.
*
* @param DeviceID is the unique ID for the device.
*
* @return XST_SUCCESS if successful, otherwise XST_FAILURE.
*
*****************************************************************************/
int SetupTimer(int DeviceID)
{
int Status;
XTtcPs_Config *Config;
XTtcPs *Timer;
TmrCntrSetup *TimerSetup;
TimerSetup = &SettingsTable;
Timer = &TtcPsInst;
/*
* Stop the timer first
*/
XTtcPs_Stop(Timer);
/*
* Look up the configuration based on the device identifier
*/
Config = XTtcPs_LookupConfig(DeviceID);
if (NULL == Config) {
return XST_FAILURE;
}
/*
* Initialize the device
*/
Status = XTtcPs_CfgInitialize(Timer, Config, Config->BaseAddress);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Set the options
*/
XTtcPs_SetOptions(Timer, TimerSetup->Options);
/*
* Timer frequency is preset in the TimerSetup structure,
* however, the value is not reflected in its other fields, such as
* IntervalValue and PrescalerValue. The following call will map the
* frequency to the interval and prescaler values.
*/
XTtcPs_CalcIntervalFromFreq(Timer, TimerSetup->OutputHz,
&(TimerSetup->Interval), &(TimerSetup->Prescaler));
/*
* Set the interval and prescale
*/
XTtcPs_SetInterval(Timer, TimerSetup->Interval);
XTtcPs_SetPrescaler(Timer, TimerSetup->Prescaler);
return XST_SUCCESS;
}
/****************************************************************************/
/**
*
* This function setups the interrupt system such that interrupts can occur.
* This function is application specific since the actual system may or may not
* have an interrupt controller. The TTC could be directly connected to a
* processor without an interrupt controller. The user should modify this
* function to fit the application.
*
* @param IntcDeviceID is the unique ID of the interrupt controller
* @param IntcInstacePtr is a pointer to the interrupt controller
* instance.
*
* @return XST_SUCCESS if successful, otherwise XST_FAILURE.
*
*****************************************************************************/
static int SetupInterruptSystem(u16 IntcDeviceID,
XScuGic *IntcInstancePtr)
{
int Status;
XScuGic_Config *IntcConfig; /* The configuration parameters of the
interrupt controller */
/*
* Initialize the interrupt controller driver
*/
IntcConfig = XScuGic_LookupConfig(IntcDeviceID);
if (NULL == IntcConfig) {
return XST_FAILURE;
}
Status = XScuGic_CfgInitialize(IntcInstancePtr, IntcConfig,
IntcConfig->CpuBaseAddress);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Connect the interrupt controller interrupt handler to the hardware
* interrupt handling logic in the ARM processor.
*/
Xil_ExceptionRegisterHandler(XIL_EXCEPTION_ID_IRQ_INT,
(Xil_ExceptionHandler) XScuGic_InterruptHandler,
IntcInstancePtr);
/*
* Enable interrupts in the ARM
*/
Xil_ExceptionEnable();
return XST_SUCCESS;
}
/***************************************************************************/
/**
*
* This function is the handler which handles the periodic tick interrupt.
* It updates its count, and set a flag to signal PWM timer counter to
* update its duty cycle.
*
* This handler provides an example of how to handle data for the TTC and
* is application specific.
*
* @param CallBackRef contains a callback reference from the driver, in
* this case it is the instance pointer for the TTC driver.
*
* @return None.
*
*****************************************************************************/
static void TickHandler(void *CallBackRef)
{
u32 StatusEvent;
/*
* Read the interrupt status, then write it back to clear the interrupt.
*/
StatusEvent = XTtcPs_GetInterruptStatus((XTtcPs *)CallBackRef);
XTtcPs_ClearInterruptStatus((XTtcPs *)CallBackRef, StatusEvent);
if (0 != (XTTCPS_IXR_INTERVAL_MASK & StatusEvent)) {
TickCount++;
if (TICKS_PER_CHANGE_PERIOD == TickCount) {
TickCount = 0;
UpdateFlag = TRUE;
}
}
else {
/*
* The Interval event should be the only one enabled. If it is
* not it is an error
*/
ErrorCount++;
}
}