/******************************************************************************
*
* Copyright (C) 2011 - 2014 Xilinx, Inc. All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/*****************************************************************************/
/**
* @file xtmrctr_intr_64bit_example.c
*
* This file contains a design example using the timer counter driver
* (XTmCtr) and hardware device using interrupt mode with the counters configured
* in cascasde mode for a 64 bit operation. Both the timers should enabled in
* HW configuration for the cascade mode of operation.
*
* The cascade mode of operation is present in the new versions of the
* axi_timer IP. Please check the HW Datasheet to see whether this feature
* is present in the version of the IP that you are using.
*
* This example assumes that the interrupt controller is also present as a part of
* the system.
*
*
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver Who Date Changes
* ----- ---- -------- -----------------------------------------------
* 2.04a sdm 07/15/11 Created based on the xtmrctr_intr_example
*
*</pre>
******************************************************************************/
/***************************** Include Files *********************************/
#include "xparameters.h"
#include "xtmrctr.h"
#include "xintc.h"
#include "xil_exception.h"
/************************** Constant Definitions *****************************/
/*
* The following constants map to the XPAR parameters created in the
* xparameters.h file. They are only defined here such that a user can easily
* change all the needed parameters in one place.
*/
#define TMRCTR_DEVICE_ID XPAR_TMRCTR_0_DEVICE_ID
#define INTC_DEVICE_ID XPAR_INTC_0_DEVICE_ID
#define TMRCTR_INTERRUPT_ID XPAR_INTC_0_TMRCTR_0_VEC_ID
/*
* The following constant determines which timer counter of the device that is
* used for this example, there are currently 2 timer counters in a device
* and this example uses the first one, 0, the timer numbers are 0 based
*/
#define TIMER_CNTR_0 0
#define TIMER_CNTR_1 1
/*
* The following constants are used to set the reset value of the timer counter,
* making this number larger reduces the amount of time this example consumes
* because it is the value the timer counter is loaded with when it is started
*/
#define RESET_VALUE_CNTR_0 0xF0000000
#define RESET_VALUE_CNTR_1 0xFFFFFF00
/**************************** Type Definitions *******************************/
/***************** Macros (Inline Functions) Definitions *********************/
/************************** Function Prototypes ******************************/
int TmrCtrCascadeIntrExample(XIntc* IntcInstancePtr,
XTmrCtr* InstancePtr,
u16 DeviceId,
u16 IntrId);
static int TmrCtrSetupIntrSystem(XIntc* IntcInstancePtr,
XTmrCtr* InstancePtr,
u16 DeviceId,
u16 IntrId);
void TimerCounterHandler(void *CallBackRef, u8 TmrCtrNumber);
void TmrCtrDisableIntr(XIntc* IntcInstancePtr, u16 IntrId);
/************************** Variable Definitions *****************************/
XIntc InterruptController; /* The instance of the Interrupt Controller */
XTmrCtr TimerCounterInst; /* The instance of the Timer Counter */
/*
* The following variables are shared between non-interrupt processing and
* interrupt processing such that they must be global.
*/
volatile int TimerExpired;
/*****************************************************************************/
/**
* This function is the main function of the Tmrctr 64 bit example using
* Interrupts.
*
* @param None.
*
* @return
*
* - XST_SUCCESS to indicate success
* - XST_FAILURE to indicate a failure.
*
* @note None.
*
******************************************************************************/
int main(void)
{
int Status;
/*
* Run the Timer Counter Cascade mode - Interrupt example.
*/
Status = TmrCtrCascadeIntrExample(&InterruptController,
&TimerCounterInst,
TMRCTR_DEVICE_ID,
TMRCTR_INTERRUPT_ID);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
return XST_SUCCESS;
}
/*****************************************************************************/
/**
* This function does a minimal test on the timer counter device and driver as a
* design example. The purpose of this function is to illustrate how to use the
* XTmrCtr driver in cascade mode of operation. It initializes a timer counter
* and then sets it up in compare mode with auto reload such that a periodic
* interrupt is generated.
*
* This function uses interrupt driven mode of the timer counter.
*
* @param IntcInstancePtr is a pointer to the Interrupt Controller
* driver Instance
* @param TmrCtrInstancePtr is a pointer to the XTmrCtr driver Instance
* @param DeviceId is the XPAR_<TmrCtr_instance>_DEVICE_ID value from
* xparameters.h
* @param IntrId is XPAR_<INTC_instance>_<TmrCtr_instance>_VEC_ID
* value from xparameters.h
*
* @return
* - XST_SUCCESS if the Test is successful.
* - XST_FAILURE if the Test is Not Successful.
*
* @note This function contains an infinite loop such that if interrupts
* are not working it may never return.
*
*****************************************************************************/
int TmrCtrCascadeIntrExample(XIntc *IntcInstancePtr,
XTmrCtr *TmrCtrInstancePtr,
u16 DeviceId,
u16 IntrId)
{
int Status;
int LastTimerExpired = 0;
/*
* Initialize the timer counter so that it's ready to use,
* specify the device ID that is generated in xparameters.h
*/
Status = XTmrCtr_Initialize(TmrCtrInstancePtr, DeviceId);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Perform a self-test to ensure that the hardware was built
* correctly, use the 1st timer in the device (0)
*/
Status = XTmrCtr_SelfTest(TmrCtrInstancePtr, TIMER_CNTR_0);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Perform a self-test to ensure that the hardware was built
* correctly, use the 2nd timer in the device (0)
*/
Status = XTmrCtr_SelfTest(TmrCtrInstancePtr, TIMER_CNTR_1);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Connect the timer counter to the interrupt subsystem such that
* interrupts can occur. This function is application specific.
* In the cascade mode only the interrupt from Timer Zero is valid.
*/
Status = TmrCtrSetupIntrSystem(IntcInstancePtr,
TmrCtrInstancePtr,
DeviceId,
IntrId);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Setup the handler for the timer counter that will be called from the
* interrupt context when the timer expires, specify a pointer to the
* timer counter driver instance as the callback reference so the handler
* is able to access the instance data
*/
XTmrCtr_SetHandler(TmrCtrInstancePtr, TimerCounterHandler,
TmrCtrInstancePtr);
/*
* Set a reset value for the timer counter such that it will expire
* eariler than letting it roll over from 0, the reset value is loaded
* into the timer counter when it is started
*/
XTmrCtr_SetResetValue(TmrCtrInstancePtr, TIMER_CNTR_0,
RESET_VALUE_CNTR_0);
XTmrCtr_SetResetValue(TmrCtrInstancePtr, TIMER_CNTR_1,
RESET_VALUE_CNTR_1);
/*
* Enable the interrupt of the timer counter so interrupts will occur
* and use auto reload mode such that the timer counter will reload
* itself automatically and continue repeatedly, without this option
* it would expire once only and set the Cascade mode.
*/
XTmrCtr_SetOptions(TmrCtrInstancePtr, TIMER_CNTR_0,
XTC_INT_MODE_OPTION |
XTC_AUTO_RELOAD_OPTION |
XTC_CASCADE_MODE_OPTION);
/*
* Reset the timer counters such that it's incrementing by default
*/
XTmrCtr_Reset(TmrCtrInstancePtr, TIMER_CNTR_0);
XTmrCtr_Reset(TmrCtrInstancePtr, TIMER_CNTR_1);
/*
* Start the timer counter 0 such that it's incrementing by default,
* then wait for it to timeout a number of times.
*/
XTmrCtr_Start(TmrCtrInstancePtr, TIMER_CNTR_0);
while (1) {
/*
* Wait for the first timer counter to expire as indicated by the
* shared variable which the handler will increment
*/
while (TimerExpired == LastTimerExpired) {
}
LastTimerExpired = TimerExpired;
/*
* If it has expired a number of times, then stop the timer counter
* and stop this example
*/
if (TimerExpired == 3) {
XTmrCtr_Stop(TmrCtrInstancePtr, TIMER_CNTR_0);
break;
}
}
TmrCtrDisableIntr(IntcInstancePtr, DeviceId);
return XST_SUCCESS;
}
/*****************************************************************************/
/**
* This function is the handler which performs processing for the timer counter.
* It is called from an interrupt context such that the amount of processing
* performed should be minimized. It is called when the timer counter expires
* if interrupts are enabled.
*
* This handler provides an example of how to handle timer counter interrupts
* but is application specific.
*
* @param CallBackRef is a pointer to the callback function
* @param TmrCtrNumber is the number of the timer to which this
* handler is associated with.
*
* @return None.
*
* @note None.
*
******************************************************************************/
void TimerCounterHandler(void *CallBackRef, u8 TmrCtrNumber)
{
XTmrCtr *InstancePtr = (XTmrCtr *)CallBackRef;
/*
* Check if the timer counter has expired, checking is not necessary
* since that's the reason this function is executed, this just shows
* how the callback reference can be used as a pointer to the instance
* of the timer counter that expired, increment a shared variable so
* the main thread of execution can see the timer expired
*/
if (XTmrCtr_IsExpired(InstancePtr, TmrCtrNumber)) {
TimerExpired++;
if(TimerExpired == 3) {
XTmrCtr_SetOptions(InstancePtr, TmrCtrNumber, 0);
}
}
}
/*****************************************************************************/
/**
* This function setups the interrupt system such that interrupts can occur
* for the timer counter. This function is application specific since the actual
* system may or may not have an interrupt controller. The timer counter could
* be directly connected to a processor without an interrupt controller. The
* user should modify this function to fit the application.
*
* @param IntcInstancePtr is a pointer to the Interrupt Controller
* driver Instance.
* @param TmrCtrInstancePtr is a pointer to the XTmrCtr driver Instance.
* @param DeviceId is the XPAR_<TmrCtr_instance>_DEVICE_ID value from
* xparameters.h.
* @param IntrId is XPAR_<INTC_instance>_<TmrCtr_instance>_VEC_ID
* value from xparameters.h.
*
* @return
* - XST_SUCCESS if the Test is successful
* - XST_FAILURE if the Test is not successful
*
* @note This function contains an infinite loop such that if interrupts
* are not working it may never return.
*
******************************************************************************/
static int TmrCtrSetupIntrSystem(XIntc* IntcInstancePtr,
XTmrCtr* TmrCtrInstancePtr,
u16 DeviceId,
u16 IntrId)
{
int Status;
/*
* Initialize the interrupt controller driver so that
* it's ready to use, specify the device ID that is generated in
* xparameters.h
*/
Status = XIntc_Initialize(IntcInstancePtr, INTC_DEVICE_ID);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Connect a device driver handler that will be called when an interrupt
* for the device occurs, the device driver handler performs the specific
* interrupt processing for the device
*/
Status = XIntc_Connect(IntcInstancePtr, IntrId,
(XInterruptHandler)XTmrCtr_InterruptHandler,
(void *)TmrCtrInstancePtr);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Start the interrupt controller such that interrupts are enabled for
* all devices that cause interrupts, specific real mode so that
* the timer counter can cause interrupts thru the interrupt controller.
*/
Status = XIntc_Start(IntcInstancePtr, XIN_REAL_MODE);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Enable the interrupt for the timer counter
*/
XIntc_Enable(IntcInstancePtr, IntrId);
/*
* Initialize the exception table.
*/
Xil_ExceptionInit();
/*
* Register the interrupt controller handler with the exception table.
*/
Xil_ExceptionRegisterHandler(XIL_EXCEPTION_ID_INT,
(Xil_ExceptionHandler)
XIntc_InterruptHandler,
IntcInstancePtr);
/*
* Enable non-critical exceptions.
*/
Xil_ExceptionEnable();
return XST_SUCCESS;
}
/******************************************************************************/
/**
*
* This function disables the interrupts for the Timer.
*
* @param IntcInstancePtr is a reference to the Interrupt Controller
* driver Instance.
* @param IntrId is XPAR_<INTC_instance>_<Timer_instance>_VEC_ID
* value from xparameters.h.
*
* @return None.
*
* @note None.
*
******************************************************************************/
void TmrCtrDisableIntr(XIntc* IntcInstancePtr, u16 IntrId)
{
/*
* Disable the interrupt for the timer counter
*/
XIntc_Disable(IntcInstancePtr, IntrId);
return;
}