/******************************************************************************
*
* Copyright (C) 2010 - 2014 Xilinx, Inc.  All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xuartps_hw.h
*
* This header file contains the hardware interface of an XUartPs device.
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver   Who    Date	Changes
* ----- ------ -------- ----------------------------------------------
* 1.00	drg/jz 01/12/10 First Release
* 1.03a sg     09/04/12 Added defines for XUARTPS_IXR_TOVR,  XUARTPS_IXR_TNFUL
*			and XUARTPS_IXR_TTRIG.
*			Modified the names of these defines
*			XUARTPS_MEDEMSR_DCDX to XUARTPS_MODEMSR_DDCD
*			XUARTPS_MEDEMSR_RIX to XUARTPS_MODEMSR_TERI
*			XUARTPS_MEDEMSR_DSRX to XUARTPS_MODEMSR_DDSR
*			XUARTPS_MEDEMSR_CTSX to XUARTPS_MODEMSR_DCTS
* 1.05a hk     08/22/13 Added prototype for uart reset and related
*			constant definitions.
*
* </pre>
*
******************************************************************************/
#ifndef XUARTPS_HW_H		/* prevent circular inclusions */
#define XUARTPS_HW_H		/* by using protection macros */

#ifdef __cplusplus
extern "C" {
#endif

/***************************** Include Files *********************************/

#include "xil_types.h"
#include "xil_assert.h"
#include "xil_io.h"

/************************** Constant Definitions *****************************/

/** @name Register Map
 *
 * Register offsets for the UART.
 * @{
 */
#define XUARTPS_CR_OFFSET		0x0000U  /**< Control Register [8:0] */
#define XUARTPS_MR_OFFSET		0x0004U  /**< Mode Register [9:0] */
#define XUARTPS_IER_OFFSET		0x0008U  /**< Interrupt Enable [12:0] */
#define XUARTPS_IDR_OFFSET		0x000CU  /**< Interrupt Disable [12:0] */
#define XUARTPS_IMR_OFFSET		0x0010U  /**< Interrupt Mask [12:0] */
#define XUARTPS_ISR_OFFSET		0x0014U  /**< Interrupt Status [12:0]*/
#define XUARTPS_BAUDGEN_OFFSET	0x0018U  /**< Baud Rate Generator [15:0] */
#define XUARTPS_RXTOUT_OFFSET	0x001CU  /**< RX Timeout [7:0] */
#define XUARTPS_RXWM_OFFSET		0x0020U  /**< RX FIFO Trigger Level [5:0] */
#define XUARTPS_MODEMCR_OFFSET	0x0024U  /**< Modem Control [5:0] */
#define XUARTPS_MODEMSR_OFFSET	0x0028U  /**< Modem Status [8:0] */
#define XUARTPS_SR_OFFSET		0x002CU  /**< Channel Status [14:0] */
#define XUARTPS_FIFO_OFFSET		0x0030U  /**< FIFO [7:0] */
#define XUARTPS_BAUDDIV_OFFSET	0x0034U  /**< Baud Rate Divider [7:0] */
#define XUARTPS_FLOWDEL_OFFSET	0x0038U  /**< Flow Delay [5:0] */
#define XUARTPS_TXWM_OFFSET		0x0044U  /**< TX FIFO Trigger Level [5:0] */
/* @} */

/** @name Control Register
 *
 * The Control register (CR) controls the major functions of the device.
 *
 * Control Register Bit Definition
 */

#define XUARTPS_CR_STOPBRK	0x00000100U  /**< Stop transmission of break */
#define XUARTPS_CR_STARTBRK	0x00000080U  /**< Set break */
#define XUARTPS_CR_TORST	0x00000040U  /**< RX timeout counter restart */
#define XUARTPS_CR_TX_DIS	0x00000020U  /**< TX disabled. */
#define XUARTPS_CR_TX_EN	0x00000010U  /**< TX enabled */
#define XUARTPS_CR_RX_DIS	0x00000008U  /**< RX disabled. */
#define XUARTPS_CR_RX_EN	0x00000004U  /**< RX enabled */
#define XUARTPS_CR_EN_DIS_MASK	0x0000003CU  /**< Enable/disable Mask */
#define XUARTPS_CR_TXRST	0x00000002U  /**< TX logic reset */
#define XUARTPS_CR_RXRST	0x00000001U  /**< RX logic reset */
/* @}*/


/** @name Mode Register
 *
 * The mode register (MR) defines the mode of transfer as well as the data
 * format. If this register is modified during transmission or reception,
 * data validity cannot be guaranteed.
 *
 * Mode Register Bit Definition
 * @{
 */
#define XUARTPS_MR_CCLK				0x00000400U /**< Input clock selection */
#define XUARTPS_MR_CHMODE_R_LOOP	0x00000300U /**< Remote loopback mode */
#define XUARTPS_MR_CHMODE_L_LOOP	0x00000200U /**< Local loopback mode */
#define XUARTPS_MR_CHMODE_ECHO		0x00000100U /**< Auto echo mode */
#define XUARTPS_MR_CHMODE_NORM		0x00000000U /**< Normal mode */
#define XUARTPS_MR_CHMODE_SHIFT				8U  /**< Mode shift */
#define XUARTPS_MR_CHMODE_MASK		0x00000300U /**< Mode mask */
#define XUARTPS_MR_STOPMODE_2_BIT	0x00000080U /**< 2 stop bits */
#define XUARTPS_MR_STOPMODE_1_5_BIT	0x00000040U /**< 1.5 stop bits */
#define XUARTPS_MR_STOPMODE_1_BIT	0x00000000U /**< 1 stop bit */
#define XUARTPS_MR_STOPMODE_SHIFT			6U  /**< Stop bits shift */
#define XUARTPS_MR_STOPMODE_MASK	0x000000A0U /**< Stop bits mask */
#define XUARTPS_MR_PARITY_NONE		0x00000020U /**< No parity mode */
#define XUARTPS_MR_PARITY_MARK		0x00000018U /**< Mark parity mode */
#define XUARTPS_MR_PARITY_SPACE		0x00000010U /**< Space parity mode */
#define XUARTPS_MR_PARITY_ODD		0x00000008U /**< Odd parity mode */
#define XUARTPS_MR_PARITY_EVEN		0x00000000U /**< Even parity mode */
#define XUARTPS_MR_PARITY_SHIFT				3U  /**< Parity setting shift */
#define XUARTPS_MR_PARITY_MASK		0x00000038U /**< Parity mask */
#define XUARTPS_MR_CHARLEN_6_BIT	0x00000006U /**< 6 bits data */
#define XUARTPS_MR_CHARLEN_7_BIT	0x00000004U /**< 7 bits data */
#define XUARTPS_MR_CHARLEN_8_BIT	0x00000000U /**< 8 bits data */
#define XUARTPS_MR_CHARLEN_SHIFT			1U  /**< Data Length shift */
#define XUARTPS_MR_CHARLEN_MASK		0x00000006U /**< Data length mask */
#define XUARTPS_MR_CLKSEL			0x00000001U /**< Input clock selection */
/* @} */


/** @name Interrupt Registers
 *
 * Interrupt control logic uses the interrupt enable register (IER) and the
 * interrupt disable register (IDR) to set the value of the bits in the
 * interrupt mask register (IMR). The IMR determines whether to pass an
 * interrupt to the interrupt status register (ISR).
 * Writing a 1 to IER Enbables an interrupt, writing a 1 to IDR disables an
 * interrupt. IMR and ISR are read only, and IER and IDR are write only.
 * Reading either IER or IDR returns 0x00.
 *
 * All four registers have the same bit definitions.
 *
 * @{
 */
#define XUARTPS_IXR_TOVR	0x00001000U /**< Tx FIFO Overflow interrupt */
#define XUARTPS_IXR_TNFUL	0x00000800U /**< Tx FIFO Nearly Full interrupt */
#define XUARTPS_IXR_TTRIG	0x00000400U /**< Tx Trig interrupt */
#define XUARTPS_IXR_DMS		0x00000200U /**< Modem status change interrupt */
#define XUARTPS_IXR_TOUT	0x00000100U /**< Timeout error interrupt */
#define XUARTPS_IXR_PARITY 	0x00000080U /**< Parity error interrupt */
#define XUARTPS_IXR_FRAMING	0x00000040U /**< Framing error interrupt */
#define XUARTPS_IXR_OVER	0x00000020U /**< Overrun error interrupt */
#define XUARTPS_IXR_TXFULL 	0x00000010U /**< TX FIFO full interrupt. */
#define XUARTPS_IXR_TXEMPTY	0x00000008U /**< TX FIFO empty interrupt. */
#define XUARTPS_IXR_RXFULL 	0x00000004U /**< RX FIFO full interrupt. */
#define XUARTPS_IXR_RXEMPTY	0x00000002U /**< RX FIFO empty interrupt. */
#define XUARTPS_IXR_RXOVR  	0x00000001U /**< RX FIFO trigger interrupt. */
#define XUARTPS_IXR_MASK	0x00001FFFU /**< Valid bit mask */
/* @} */


/** @name Baud Rate Generator Register
 *
 * The baud rate generator control register (BRGR) is a 16 bit register that
 * controls the receiver bit sample clock and baud rate.
 * Valid values are 1 - 65535.
 *
 * Bit Sample Rate = CCLK / BRGR, where the CCLK is selected by the MR_CCLK bit
 * in the MR register.
 * @{
 */
#define XUARTPS_BAUDGEN_DISABLE		0x00000000U /**< Disable clock */
#define XUARTPS_BAUDGEN_MASK		0x0000FFFFU /**< Valid bits mask */
#define XUARTPS_BAUDGEN_RESET_VAL	0x0000028BU /**< Reset value */

/** @name Baud Divisor Rate register
 *
 * The baud rate divider register (BDIV) controls how much the bit sample
 * rate is divided by. It sets the baud rate.
 * Valid values are 0x04 to 0xFF. Writing a value less than 4 will be ignored.
 *
 * Baud rate = CCLK / ((BAUDDIV + 1) x BRGR), where the CCLK is selected by
 * the MR_CCLK bit in the MR register.
 * @{
 */
#define XUARTPS_BAUDDIV_MASK        0x000000FFU	/**< 8 bit baud divider mask */
#define XUARTPS_BAUDDIV_RESET_VAL   0x0000000FU	/**< Reset value */
/* @} */


/** @name Receiver Timeout Register
 *
 * Use the receiver timeout register (RTR) to detect an idle condition on
 * the receiver data line.
 *
 * @{
 */
#define XUARTPS_RXTOUT_DISABLE		0x00000000U  /**< Disable time out */
#define XUARTPS_RXTOUT_MASK			0x000000FFU  /**< Valid bits mask */

/** @name Receiver FIFO Trigger Level Register
 *
 * Use the Receiver FIFO Trigger Level Register (RTRIG) to set the value at
 * which the RX FIFO triggers an interrupt event.
 * @{
 */

#define XUARTPS_RXWM_DISABLE	0x00000000U  /**< Disable RX trigger interrupt */
#define XUARTPS_RXWM_MASK		0x0000003FU  /**< Valid bits mask */
#define XUARTPS_RXWM_RESET_VAL	0x00000020U  /**< Reset value */
/* @} */

/** @name Transmit FIFO Trigger Level Register
 *
 * Use the Transmit FIFO Trigger Level Register (TTRIG) to set the value at
 * which the TX FIFO triggers an interrupt event.
 * @{
 */

#define XUARTPS_TXWM_MASK		0x0000003FU  /**< Valid bits mask */
#define XUARTPS_TXWM_RESET_VAL	0x00000020U  /**< Reset value */
/* @} */

/** @name Modem Control Register
 *
 * This register (MODEMCR) controls the interface with the modem or data set,
 * or a peripheral device emulating a modem.
 *
 * @{
 */
#define XUARTPS_MODEMCR_FCM	0x00000010U  /**< Flow control mode */
#define XUARTPS_MODEMCR_RTS	0x00000002U  /**< Request to send */
#define XUARTPS_MODEMCR_DTR	0x00000001U  /**< Data terminal ready */
/* @} */

/** @name Modem Status Register
 *
 * This register (MODEMSR) indicates the current state of the control lines
 * from a modem, or another peripheral device, to the CPU. In addition, four
 * bits of the modem status register provide change information. These bits
 * are set to a logic 1 whenever a control input from the modem changes state.
 *
 * Note: Whenever the DCTS, DDSR, TERI, or DDCD bit is set to logic 1, a modem
 * status interrupt is generated and this is reflected in the modem status
 * register.
 *
 * @{
 */
#define XUARTPS_MODEMSR_FCMS	0x00000100U  /**< Flow control mode (FCMS) */
#define XUARTPS_MODEMSR_DCD		0x00000080U  /**< Complement of DCD input */
#define XUARTPS_MODEMSR_RI		0x00000040U  /**< Complement of RI input */
#define XUARTPS_MODEMSR_DSR		0x00000020U  /**< Complement of DSR input */
#define XUARTPS_MODEMSR_CTS		0x00000010U  /**< Complement of CTS input */
#define XUARTPS_MODEMSR_DDCD	0x00000008U  /**< Delta DCD indicator */
#define XUARTPS_MODEMSR_TERI  0x00000004U  /**< Trailing Edge Ring Indicator */
#define XUARTPS_MODEMSR_DDSR	0x00000002U  /**< Change of DSR */
#define XUARTPS_MODEMSR_DCTS	0x00000001U  /**< Change of CTS */
/* @} */

/** @name Channel Status Register
 *
 * The channel status register (CSR) is provided to enable the control logic
 * to monitor the status of bits in the channel interrupt status register,
 * even if these are masked out by the interrupt mask register.
 *
 * @{
 */
#define XUARTPS_SR_TNFUL	0x00004000U /**< TX FIFO Nearly Full Status */
#define XUARTPS_SR_TTRIG	0x00002000U /**< TX FIFO Trigger Status */
#define XUARTPS_SR_FLOWDEL	0x00001000U /**< RX FIFO fill over flow delay */
#define XUARTPS_SR_TACTIVE	0x00000800U /**< TX active */
#define XUARTPS_SR_RACTIVE	0x00000400U /**< RX active */
#define XUARTPS_SR_DMS		0x00000200U /**< Delta modem status change */
#define XUARTPS_SR_TOUT		0x00000100U /**< RX timeout */
#define XUARTPS_SR_PARITY	0x00000080U /**< RX parity error */
#define XUARTPS_SR_FRAME	0x00000040U /**< RX frame error */
#define XUARTPS_SR_OVER		0x00000020U /**< RX overflow error */
#define XUARTPS_SR_TXFULL	0x00000010U /**< TX FIFO full */
#define XUARTPS_SR_TXEMPTY	0x00000008U /**< TX FIFO empty */
#define XUARTPS_SR_RXFULL	0x00000004U /**< RX FIFO full */
#define XUARTPS_SR_RXEMPTY	0x00000002U /**< RX FIFO empty */
#define XUARTPS_SR_RXOVR	0x00000001U /**< RX FIFO fill over trigger */
/* @} */

/** @name Flow Delay Register
 *
 * Operation of the flow delay register (FLOWDEL) is very similar to the
 * receive FIFO trigger register. An internal trigger signal activates when the
 * FIFO is filled to the level set by this register. This trigger will not
 * cause an interrupt, although it can be read through the channel status
 * register. In hardware flow control mode, RTS is deactivated when the trigger
 * becomes active. RTS only resets when the FIFO level is four less than the
 * level of the flow delay trigger and the flow delay trigger is not activated.
 * A value less than 4 disables the flow delay.
 * @{
 */
#define XUARTPS_FLOWDEL_MASK	XUARTPS_RXWM_MASK	/**< Valid bit mask */
/* @} */



/*
 * Defines for backwards compatabilty, will be removed
 * in the next version of the driver
 */
#define XUARTPS_MEDEMSR_DCDX  XUARTPS_MODEMSR_DDCD
#define XUARTPS_MEDEMSR_RIX   XUARTPS_MODEMSR_TERI
#define XUARTPS_MEDEMSR_DSRX  XUARTPS_MODEMSR_DDSR
#define	XUARTPS_MEDEMSR_CTSX  XUARTPS_MODEMSR_DCTS



/**************************** Type Definitions *******************************/


/***************** Macros (Inline Functions) Definitions *********************/

/****************************************************************************/
/**
* Read a UART register.
*
* @param	BaseAddress contains the base address of the device.
* @param	RegOffset contains the offset from the base address of the
*		device.
*
* @return	The value read from the register.
*
* @note		C-Style signature:
*		u32 XUartPs_ReadReg(u32 BaseAddress, int RegOffset)
*
******************************************************************************/
#define XUartPs_ReadReg(BaseAddress, RegOffset) \
	Xil_In32((BaseAddress) + (u32)(RegOffset))

/***************************************************************************/
/**
* Write a UART register.
*
* @param	BaseAddress contains the base address of the device.
* @param	RegOffset contains the offset from the base address of the
*		device.
* @param	RegisterValue is the value to be written to the register.
*
* @return	None.
*
* @note		C-Style signature:
*		void XUartPs_WriteReg(u32 BaseAddress, int RegOffset,
*						   u16 RegisterValue)
*
******************************************************************************/
#define XUartPs_WriteReg(BaseAddress, RegOffset, RegisterValue) \
	Xil_Out32((BaseAddress) + (u32)(RegOffset), (u32)(RegisterValue))

/****************************************************************************/
/**
* Determine if there is receive data in the receiver and/or FIFO.
*
* @param	BaseAddress contains the base address of the device.
*
* @return	TRUE if there is receive data, FALSE otherwise.
*
* @note		C-Style signature:
*		u32 XUartPs_IsReceiveData(u32 BaseAddress)
*
******************************************************************************/
#define XUartPs_IsReceiveData(BaseAddress)			 \
	!((Xil_In32((BaseAddress) + XUARTPS_SR_OFFSET) & 	\
	(u32)XUARTPS_SR_RXEMPTY) == (u32)XUARTPS_SR_RXEMPTY)

/****************************************************************************/
/**
* Determine if a byte of data can be sent with the transmitter.
*
* @param	BaseAddress contains the base address of the device.
*
* @return	TRUE if the TX FIFO is full, FALSE if a byte can be put in the
*		FIFO.
*
* @note		C-Style signature:
*		u32 XUartPs_IsTransmitFull(u32 BaseAddress)
*
******************************************************************************/
#define XUartPs_IsTransmitFull(BaseAddress)			 \
	((Xil_In32((BaseAddress) + XUARTPS_SR_OFFSET) & 	\
	 (u32)XUARTPS_SR_TXFULL) == (u32)XUARTPS_SR_TXFULL)

/************************** Function Prototypes ******************************/

void XUartPs_SendByte(u32 BaseAddress, u8 Data);

u8 XUartPs_RecvByte(u32 BaseAddress);

void XUartPs_ResetHw(u32 BaseAddress);

/************************** Variable Definitions *****************************/

#ifdef __cplusplus
}
#endif

#endif /* end of protection macro */