/******************************************************************************
*
* Copyright (C) 2006 Vreelin Engineering, Inc. All Rights Reserved.
* (c) Copyright 2007-2013 Xilinx, Inc. All rights reserved.
*
* This file contains confidential and proprietary information of Xilinx, Inc.
* and is protected under U.S. and international copyright and other
* intellectual property laws.
*
* DISCLAIMER
* This disclaimer is not a license and does not grant any rights to the
* materials distributed herewith. Except as otherwise provided in a valid
* license issued to you by Xilinx, and to the maximum extent permitted by
* applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL
* FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS,
* IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
* MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE;
* and (2) Xilinx shall not be liable (whether in contract or tort, including
* negligence, or under any other theory of liability) for any loss or damage
* of any kind or nature related to, arising under or in connection with these
* materials, including for any direct, or any indirect, special, incidental,
* or consequential loss or damage (including loss of data, profits, goodwill,
* or any type of loss or damage suffered as a result of any action brought by
* a third party) even if such damage or loss was reasonably foreseeable or
* Xilinx had been advised of the possibility of the same.
*
* CRITICAL APPLICATIONS
* Xilinx products are not designed or intended to be fail-safe, or for use in
* any application requiring fail-safe performance, such as life-support or
* safety devices or systems, Class III medical devices, nuclear facilities,
* applications related to the deployment of airbags, or any other applications
* that could lead to death, personal injury, or severe property or
* environmental damage (individually and collectively, "Critical
* Applications"). Customer assumes the sole risk and liability of any use of
* Xilinx products in Critical Applications, subject only to applicable laws
* and regulations governing limitations on product liability.
*
* THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE
* AT ALL TIMES.
*
******************************************************************************/
/******************************************************************************/
/**
* @file xusb_mouse.h
*
* This file contains the constants, type definitions, variables and function
* prototypes used in the mouse application.
*
* @note None.
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver Who Date Changes
* ----- ---- ------------------------------------------------------------------
* 1.00a hvm 3/30/07 First release
* 3.02a hvm 08/16/10 Updated with the little endian support changes.
*
* </pre>
*****************************************************************************/
#ifndef XUSB_MOUSE_H
#define XUSB_MOUSE_H
#ifdef __cplusplus
extern "C" {
#endif
/***************************** Include Files **********************************/
#include "xusb_cp9.h"
/************************** Constant Definitions ******************************/
/*
* Mouse interface class
*/
#define MOUSE_PROTOCOL 2
#define HID_DESCR 0x21
/************************** Variable Definitions ******************************/
/*
* Flags used to abort read and write command loops.
*/
extern u16 MaxControlSize;
USB_STD_DEV_DESC DeviceDescriptor __attribute__ ((aligned (4))) = {
sizeof (USB_STD_DEV_DESC), /* Descriptor Size 18 bytes */
DEVICE_DESCR, /* This is a device descriptor */
#ifdef __LITTLE_ENDIAN__
0x0200, /* USB version */
#else
0x02, /* USB version */
#endif
0xFF, /* Vendor Specific */
00, /* Unused */
00, /* Unused */
0x40, /* Ep0 Max Pkt Size 64 bytes */
#ifdef __LITTLE_ENDIAN__
0x03FD, /* Vendor Id */
0x0300, /* Product Id */
0x0100, /* BCD device */
#else
0xFD03, /* Vendor Id */
0x0003, /* Product Id */
0x01, /* BCD device */
#endif
01, /* String Index of manufacturer */
02, /* String Index of product */
03, /* String Index of serial number */
01 /* Number of configurations */
};
USB_STD_QUAL_DESC QualifierDescriptor __attribute__ ((aligned(4))) = {
sizeof(USB_STD_QUAL_DESC),
QUALIFIER_DESCR, 00, 02, 0, 00, 00, 0x40, 01, 0};
FPGA1_CONFIGURATION __attribute__ ((aligned (4))) FsUsbConfig = {
/*
* Configuration descriptor.
*/
{
sizeof(USB_STD_CFG_DESC),/* Size of config descriptor 9 bytes */
CONFIG_DESCR, /* This is a conifig descriptor */
sizeof(FsUsbConfig), /* Total size of configuration LS */
0x00, /* Total size of configuration MS */
0x01, /* No. Of interfaces 1 */
CONFIGURATION_ONE, /* No of configuration values */
0x00, /* Configuration string */
0xc0, /* Self Powered */
0x01 /* Uses 2mA from the USB bus */
},
/*
* FPGA1 Class interface.
*/
{
sizeof(USB_STD_IF_DESC), /* Interface Descriptor size 9 bytes */
INTERFACE_DESCR, /* This is an interface descriptor */
0x00, /* Interface number 0 */
0x00, /* Alternate set 0 */
0x01, /* Number of end points 1 */
USB_CLASS_HID, /* Vendor specific */
1, /* Interface sub class */
MOUSE_PROTOCOL, /* Mouse */
0x00 /* Interface unused */
},
/*
* HID descriptor
*/
{
sizeof(USB_STD_HID_DESC), /* HID descriptor Length */
HID_DESCR, /* This is an HID descriptor */
0x10, /* bcdHID L */
0x01, /* bcdHID H Rev 1.1 */
0x00, /* bCountryCode (none) */
0x01, /* bNumDescriptors
(one report descriptor) */
0x22, /* bDescriptorType (report)*/
0x34, /* wDescriptorLength
(L/H) (report descriptor size
is 43 bytes) */
0x00
},
/*
* End_point 1 RX descriptor from device to host.
*/
{
sizeof(USB_STD_EP_DESC), /* End point descriptor size */
ENDPOINT_DESCR, /* This is an end point descriptor */
0x81, /* End point one */
EP_INTERRUPT, /* End point type */
0x40, /* Maximum packet size 64 bytes LS */
0x00, /* Maximum packetsize MS */
0x0A /* Nak rate */
},
};
FPGA1_CONFIGURATION __attribute__ ((aligned (4))) HsUsbConfig = {
/*
* Configuration descriptor.
*/
{
sizeof(USB_STD_CFG_DESC),/* Size of config descriptor 9 bytes */
CONFIG_DESCR, /* This is a conifig descriptor */
sizeof(HsUsbConfig), /* Total size of configuration LS */
0x00, /* Total size of configuration MS */
0x01, /* No. Of interfaces 1 */
CONFIGURATION_ONE, /* No of configuration values */
0x00, /* Configuration string */
0xc0, /* Self Powered */
0x01 /* Uses 2mA from the USB bus */
},
/*
* FPGA1 Class interface.
*/
{
sizeof(USB_STD_IF_DESC), /* Interface Descriptor size 9 bytes */
INTERFACE_DESCR, /* This is an interface descriptor */
0x00, /* Interface number 0 */
0x00, /* Alternate set 0 */
0x01, /* Number of end points 1 */
USB_CLASS_HID, /* Vendor specific */
1, /* Interface sub class */
MOUSE_PROTOCOL, /* Mouse */
0x00 /* Interface unused */
},
/*
* HID descriptor
*/
{
sizeof(USB_STD_HID_DESC), /* HID descriptor Length */
HID_DESCR, /* This is an HID descriptor */
0x10, /* bcdHID L */
0x01, /* bcdHID H Rev 1.1 */
0x00, /* bCountryCode (none) */
0x01, /* bNumDescriptors
(one report descriptor) */
0x22, /* bDescriptorType (report)*/
0x34, /* wDescriptorLength
(L/H) (report descriptor size
is 43 bytes) */
0x00
},
/*
* End_point 1 RX descriptor from device to host.
*/
{
sizeof(USB_STD_EP_DESC), /* End point descriptor size */
ENDPOINT_DESCR, /* This is an end point descriptor */
0x81, /* End point one */
EP_INTERRUPT, /* End point type */
0x40, /* Maximum packet size 64 bytes LS */
0x00, /* Maximum packetsize MS */
0x0A /* Nak rate */
},
};
USB_STD_STRING_DESC LangId __attribute__ ((aligned (4))) =
{
/*
* Language ID codes.
*/
4, STRING_DESCR, {0x0409}
};
USB_STD_STRING_MAN_DESC Manufacturer __attribute__ ((aligned (4))) =
{
/*
* Manufacturer String.
*/
sizeof(USB_STD_STRING_MAN_DESC), STRING_DESCR,
{'X',0,'I',0,'L',0,'I',0,'N',0,'X',0,' ',0}
};
USB_STD_STRING_PS_DESC ProductString __attribute__ ((aligned (4))) =
{
/*
* Product ID String.
*/
sizeof(USB_STD_STRING_PS_DESC), STRING_DESCR,
{'F',0,'P',0,'G',0,'A',0,'3',0}
};
USB_STD_STRING_SN_DESC SerialNumber __attribute__ ((aligned (4))) =
{
/*
* Product ID String.
*/
sizeof(USB_STD_STRING_SN_DESC), STRING_DESCR,
{'0',0,'0',0,'0',0,'0',0,'0',0,'0',0,'0',0,'1',0,
'7',0,'1',0,'5',0,'0',0,'4',0,'2',0,'6',0,'2',0,
'0',0,'0',0,'5',0,'7',0,'4',0}
};
USB_STD_HID_DESC HidDescriptor __attribute__ ((aligned(4))) = {
sizeof(USB_STD_HID_DESC), /* bLength */
0x21, /* bDescriptorType = HID */
0x10, /* bcdHID L */
0x01, /* bcdHID H Rev 1.1 */
0x00, /* bCountryCode (none) */
0x01, /* bNumDescriptors
(one report descriptor) */
0x22, /* bDescriptorType (report)*/
0x34, /* wDescriptorLength
(L/H) (report descriptor size
is 43 bytes) */
0x00
};
/************************** Function Prototypes *******************************/
void InitUsbInterface(XUsb *InstancePtr);
void UsbIfIntrHandler(void *CallBackRef, u32 IntrStatus);
void EpIntrHandler(void *CallBackRef, u8 EpNum, u32 IntrStatus);
void Ep0IntrHandler(void *CallBackRef, u8 EpNum, u32 IntrStatus);
void Ep1IntrHandler(void *CallBackRef, u8 EpNum, u32 IntrStatus);
#ifdef __cplusplus
}
#endif
#endif /* XUSB_STORAGE_H */