/******************************************************************************
*
* Copyright (C) 2008 - 2014 Xilinx, Inc. All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/*****************************************************************************/
/**
* @file xspi_slave_polled_example.c
*
* This file contains a design example using the Spi driver (XSpi) and the SPI
* device as a Slave, in polled mode.
*
* This example fills the Spi Tx buffer with the number of data bytes it expects
* to receive from the master and then Spi device waits for an external master to
* initiate the transfer. When the master initiates the transfer, the Spi device
* receives data from the master and simultaneously sends the data in Tx buffer
* to the master. Once the transfer is complete, this example prints the data
* received from the master. The number of bytes to be received by the Spi slave
* is defined by the constant BUFFER_SIZE in this file.
*
* The external SPI devices that are present on the Xilinx boards don't support
* the Master functionality. This example has been tested with an off board
* external SPI Master device and the Xilinx SPI device configured as a Slave.
* This example has been tested for byte-wide SPI transfers.
*
* @note
*
* This example assumes that there is a STDIO device in the system.
*
*<pre>
* MODIFICATION HISTORY:
*
* Ver Who Date Changes
* ----- ---- -------- ---------------------------------------------------------
* 1.00a psk 09/05/08 First Release
* 3.00a ktn 10/28/09 Converted all register accesses to 32 bit access.
* Updated to use the HAL APIs/macros. Replaced call to
* XSpi_Initialize API with XSpi_LookupConfig and
* XSpi_CfgInitialize.
*
*</pre>
******************************************************************************/
/***************************** Include Files *********************************/
#include "xparameters.h" /* XPAR parameters */
#include "xspi.h" /* SPI device driver */
#include "stdio.h"
/************************** Constant Definitions *****************************/
/*
* The following constants map to the XPAR parameters created in the
* xparameters.h file. They are defined here such that a user can easily
* change all the needed parameters in one place.
*/
#define SPI_DEVICE_ID XPAR_SPI_0_DEVICE_ID
/*
* This is the size of the buffer to be transmitted/received in this example.
*/
#define BUFFER_SIZE 16
/**************************** Type Definitions *******************************/
/***************** Macros (Inline Functions) Definitions *********************/
/************************** Function Prototypes ******************************/
static int SpiSlavePolledExample(XSpi *SpiInstancePtr, u16 SpiDeviceId);
/************************** Variable Definitions *****************************/
/*
* The instances to support the device drivers are global such that they are
* initialized to zero each time the program runs. They could be local but
* should at least be static so that they are zeroed.
*/
static XSpi SpiInstance; /* The instance of the SPI device */
/*
* The following variables are used to read from the Spi device, these are
* global to avoid having large buffers on the stack.
*/
u8 ReadBuffer[BUFFER_SIZE];
u8 WriteBuffer[BUFFER_SIZE];
/*
* The following variable allows a test value to be added to the values that
* are sent in reflection to the Master transmission such that unique values can
* be generated to guarantee the transfer from Slave to Master is successful.
*/
int Test;
/*****************************************************************************/
/**
*
* Main function to call the Spi Slave example in polled mode.
*
* @param None
*
* @return XST_SUCCESS if successful, otherwise XST_FAILURE.
*
* @note None
*
******************************************************************************/
int main(void)
{
int Status;
/*
* Run the Spi Slave polled example.
*/
Status = SpiSlavePolledExample(&SpiInstance, SPI_DEVICE_ID);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
return XST_SUCCESS;
}
/*****************************************************************************/
/**
*
* This function does a minimal test on the Spi device and driver as a design
* example. The purpose of this function is to illustrate the device slave
* functionality in polled mode. This function receives data from a master and
* prints the received data.
*
* @param SpiInstancePtr is a pointer to the instance of Spi component.
*
* @param SpiDeviceId is the Device ID of the Spi Device and is the
* XPAR_<SPI_instance>_DEVICE_ID value from xparameters.h.
*
* @return XST_SUCCESS if successful, otherwise XST_FAILURE.
*
* @note This function contains an infinite loop such that if the Spi
* device doesn't receive any data, it may never return.
*
******************************************************************************/
int SpiSlavePolledExample(XSpi *SpiInstancePtr, u16 SpiDeviceId)
{
XSpi_Config *ConfigPtr;
int Status;
u32 Count;
xil_printf("\r\nEntering the Spi Slave Polled Example.\r\n");
xil_printf("Waiting for data from SPI master\r\n");
/*
* Initialize the SPI driver so that it's ready to use, specify the
* device ID that is generated in xparameters.h.
*/
ConfigPtr = XSpi_LookupConfig(SpiDeviceId);
if (ConfigPtr == NULL) {
return XST_FAILURE;
}
Status = XSpi_CfgInitialize(SpiInstancePtr, ConfigPtr,
ConfigPtr->BaseAddress);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* The SPI device is a slave by default and the clock phase and polarity
* have to be set according to its master. In this example, CPOL is set
* to active low and CPHA is set to 1.
*/
Status = XSpi_SetOptions(SpiInstancePtr, XSP_CLK_PHASE_1_OPTION |
XSP_CLK_ACTIVE_LOW_OPTION);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/*
* Start the SPI driver so that the device is enabled.
*/
XSpi_Start(SpiInstancePtr);
/*
* Disable Global interrupt to use polled mode operation.
*/
XSpi_IntrGlobalDisable(SpiInstancePtr);
/*
* Initialize the write buffer with pattern to write, initialize the
* read buffer to zero so that it can be verified after the read.
*/
Test = 0xF0;
for (Count = 0; Count < BUFFER_SIZE; Count++) {
WriteBuffer[Count] = (u8)(Count + Test);
ReadBuffer[Count] = 0;
}
/*
* Prepare the data buffers for transmission and to send/receive data
* when the SPI device is selected by a master.
*/
XSpi_Transfer(SpiInstancePtr, WriteBuffer, ReadBuffer, BUFFER_SIZE);
/*
* Print all the data received from the master so that it can be
* compared with the data sent by the master.
*/
xil_printf("\r\nReceived data is:\r\n");
for (Count = 0; Count < BUFFER_SIZE; Count++) {
xil_printf("0x%x \r\n", ReadBuffer[Count]);
}
xil_printf("\r\nExiting the Spi Slave Polled Example.\r\n");
return XST_SUCCESS;
}