https://github.com/warmcat/libwebsockets/issues/481
Return 403 Forbidden if we don't end up with a uri path starting with /
Test server already did this, but this makes it built into the
library.
Signed-off-by: Andy Green <andy@warmcat.com>
Originally this was alright in wsi->u.hdr, because ah implied header
processing. But since we allowed ah to be held across http
keep-alive transactions if we saw we had more header data, it means
we were trying to read this union member out of scope after it had
transitioned.
Moving the more_rx_waiting member to be a 1-bit bifield in the wsi
solves it and lets us check the state any time later at http
transaction completion.
https://github.com/warmcat/libwebsockets/issues/441
Signed-off-by: Andy Green <andy.green@linaro.org>
This adds an info member that allows the user code to
set the library's network action timeout in seconds.
If left at the default 0, the build-time default
AWAITING_TIMEOUT continues to be used.
As suggested
https://github.com/warmcat/libwebsockets/issues/427
Signed-off-by: Andy Green <andy.green@linaro.org>
This is intended to solve a longstanding problem with the
relationship between http/1.1 keep-alive and the service
loop.
Ah now contain an rx buffer which is used during header
processing, and the ah may not be detached from the wsi
until the rx buffer is exhausted.
Having the rx buffer in the ah means we can delay using the
rx until a later service loop.
Ah which have pending rx force POLLIN service on the wsi
they are attached to automatically, so we can interleave
general service / connections with draining each ah rx
buffer.
The possible http/1.1 situations and their dispositions are:
1) exactly one set of http headers come. After processing,
the ah is detached since no pending rx left. If more
headers come later, a fresh ah is aqcuired when available
and the rx flow control blocks the read until then.
2) more that one whole set of headers come and we remain in
http mode (no upgrade). The ah is left attached and
returns to the service loop after the first set of headers.
We will get forced service due to the ah having pending
content (respecting flowcontrol) and process the pending
rx in the ah. If we use it all up, we will detach the
ah.
3) one set of http headers come with ws traffic appended.
We service the headers, do the upgrade, and keep the ah
until the remaining ws content is used. When we
exhausted the ws traffix in the ah rx buffer, we
detach the ah.
Since there can be any amount of http/1.1 pipelining on a
connection, and each may be expensive to service, it's now
enforced there is a return to the service loop after each
header set is serviced on a connection.
When I added the forced service for ah with pending buffering,
I added support for it to the windows plat code. However this
is untested.
Signed-off-by: Andy Green <andy.green@linaro.org>
This gets the libuv stuff plumbed in and working.
Currently it's only workable for some service thread, and there
is an isolated valgrind problem left
==28425== 128 bytes in 1 blocks are definitely lost in loss record 3 of 3
==28425== at 0x4C28C50: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==28425== by 0x4C2AB1E: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==28425== by 0x58BBB27: maybe_resize (core.c:748)
==28425== by 0x58BBB27: uv__io_start (core.c:787)
==28425== by 0x58C1B80: uv__signal_loop_once_init (signal.c:225)
==28425== by 0x58C1B80: uv_signal_init (signal.c:260)
==28425== by 0x58BF7A6: uv_loop_init (loop.c:66)
==28425== by 0x4157F5: lws_uv_initloop (libuv.c:89)
==28425== by 0x405536: main (test-server-libuv.c:284)
libuv wants to sign off on all libuv 'handles' that will close, and
callback to do the close confirmation asynchronously. The wsi close function
is adapted when libuv is in use to work with libuv accordingly and exit the uv
loop the number of remaining wsi is zero.
Signed-off-by: Andy Green <andy.green@linaro.org>
Connections must hold an ah for the whole time they are
processing one header set, even if eg, the headers are
fragmented and it involves network roundtrip times.
However on http1.1 / keepalive, it must drop the ah when
there are no more header sets to deal with, and reacquire
the ah later when more data appears. It's because the
time between header sets / http1.1 requests is unbounded
and the ah would be tied up forever.
But in the case that we got pipelined http1.1 requests,
even partial already buffered, we must keep the ah,
resetting it instead of dropping it. Because we store
the rx data conveniently in a per-tsi buffer since it only
does one thing at a time per thread, we cannot go back to
the event loop to await a new ah inside one service action.
But no problem since we definitely already have an ah,
let's just reuse it at http completion time if more rx is
already buffered.
NB: attack.sh makes request with echo | nc, this
accidentally sends a trailing '\n' from the echo showing
this problem. With this patch attack.sh can complete well.
Signed-off-by: Andy Green <andy.green@linaro.org>
SO_REUSEPORT means you don't get any error any more if another
server instance is already running, this will be quite unexpected
for singlethreaded users.
Signed-off-by: Andy Green <andy.green@linaro.org>
This adds support for multithreaded service to lws without adding any
threading or locking code in the library.
At context creation time you can request split the service part of the
context into n service domains, which are load-balanced so that the most
idle one gets the next listen socket accept.
There's a single listen socket on one port still.
User code may then spawn n threads doing n service loops / poll()s
simultaneously. Locking is only required (I think) in the existing
FD lock callbacks already handled by the pthreads server example,
and that locking takes place in user code. So the library remains
completely agnostic about the threading / locking scheme.
And by default, it's completely compatible with one service thread
so no changes are required by people uninterested in multithreaded
service.
However for people interested in extremely lightweight mass http[s]/
ws[s] service with minimum provisioning, the library can now do
everything out of the box.
To test it, just try
$ libwebsockets-test-server-pthreads -j 8
where -j controls the number of service threads
Signed-off-by: Andy Green <andy.green@linaro.org>
Server side has had immediate RX flow control for quite a while.
But client side made do with RX continuing until what had been received was exhausted.
For what Autobahn tests, that's not enough.
This patch gives clientside RX flow control the same immediate effect as the server
side enjoys, re-using the same code.
Signed-off-by: Andy Green <andy.green@linaro.org>
The only guy who cared about this for a long while
(since I eliminated the pre-standard protocol variants)
was sending a close frame.
- Set it to 0 so old code remains happy. It only affects
user code buffer commit, if there's overcommit no harm
done so no effect directly on user ABI.
- Remove all uses inside the library. The sample apps
don't have it any more and that's the recommendation now.
Signed-off-by: Andy Green <andy.green@linaro.org>
- Mainly symbol length reduction
- Whitespace clean
- Code refactor for linear flow
- Audit @Context for API docs vs changes
Signed-off-by: Andy Green <andy.green@linaro.org>
Since struct lws (wsi) now has his own context pointer,
we were able to remove the need for passing context
almost everywhere in the apis.
In turn, that means there's no real use for context being
passed to every callback; in the rare cases context is
needed user code can get it with lws_get_ctx(wsi)
Signed-off-by: Andy Green <andy.green@linaro.org>
Extend the cleanout caused by wsi having a context pointer
into the public api.
There's no point keeping the 1.5 compatibility work,
we have changed the api in several places and
rebuilt wasn't going to be enough a while ago.
Signed-off-by: Andy Green <andy.green@linaro.org>
Now we bit the bullet and gave each wsi an lws_context *, many
internal apis that take both a context and wsi parameter only
need the wsi.
Also simplify parser code by making a temp var for
allocated_headers * instead of the longwinded
dereference chain everywhere.
Signed-off-by: Andy Green <andy.green@linaro.org>
Having the lws_context alone doesn't let us track state or act different
by wsi, which is the most interesting usecase. Eg not only simply track
file position / decompression state per wsi but also act differently
according to wsi authentication state / associated cookies.
Signed-off-by: Andy Green <andy.green@linaro.org>
This is a rewrite of the patch from Soapyman here
https://github.com/warmcat/libwebsockets/pull/363
The main changes compared to Soapyman's original patch are
- There's no new stuff in the info struct user code does any overrides
it may want to do explicitly after lws_context_create returns
- User overrides for file ops can call through (subclass) to the original
platform implementation using lws_get_fops_plat()
- A typedef is provided for plat-specific fd type
- Public helpers are provided to allow user code to be platform-independent
about file access, using the lws platform file operations underneath:
static inline lws_filefd_type
lws_plat_file_open(struct lws_plat_file_ops *fops, const char *filename,
unsigned long *filelen, int flags)
static inline int
lws_plat_file_close(struct lws_plat_file_ops *fops, lws_filefd_type fd)
static inline unsigned long
lws_plat_file_seek_cur(struct lws_plat_file_ops *fops, lws_filefd_type fd,
long offset_from_cur_pos)
static inline int
lws_plat_file_read(struct lws_plat_file_ops *fops, lws_filefd_type fd,
unsigned long *amount, unsigned char *buf, unsigned long len)
static inline int
lws_plat_file_write(struct lws_plat_file_ops *fops, lws_filefd_type fd,
unsigned long *amount, unsigned char *buf, unsigned long len)
There's example documentation and implementation in the test server.
Signed-off-by: Andy Green <andy.green@linaro.org>
This nukes all the oldstyle prefixes except in the compatibility code.
struct libwebsockets becomes struct lws too.
The api docs are updated accordingly as are the READMEs that mention
those apis.
Signed-off-by: Andy Green <andy.green@linaro.org>
Between changing to lws_ a few years ago and the previous two
patches migrating the public apis, there are only a few
internal functions left using libwebsocket_*.
Change those to also use lws_ without regard to compatibility
since they were never visible outside the library.
Signed-off-by: Andy Green <andy.green@linaro.org>
Change all internal uses of rationalized public apis to reflect the
new names.
Theer are a few things that got changed as side effect of search/replace
matches, but these are almost all internal. I added a compatibility define
for the public enum that got renamed.
Theoretically existing code should not notice the difference from these
two patches. And new code will find the new names.
https://github.com/warmcat/libwebsockets/issues/357
Signed-off-by: Andy Green <andy.green@linaro.org>
