This adds a new member to the context creation info struct "ws_ping_pong_interval".
If nonzero, it sets the number of seconds that established ws connections are
allowed to be idle before a PING is forced to be sent. If zero (the default) then
tracking of idle connection is disabled for backwards compatibility.
Timeouts cover both the period between decision to send the ping and it being
sent (because it needs the socket to become writeable), and the period between
the ping being sent and the PONG coming back.
INFO debug logs are issues when the timeout stuff is operating.
You can test the server side by running the test server hacked to set ws_ping_pong_interval
and debug log mask of 15. Both the mirror protocol and the server-status protocol are
idle if nothing is happening and will trigger the PING / PONG testing. (You can also
test using lwsws and /etc/lwsws/conf with "ws-pingpong-secs": "20" in the global section)
For client, run the test client with -n -P 20 for 20s interval. -n stops the test client
writing using the mirror protocol, so it will be idle and trigger the PING / PONGs.
The timeout interval may be up to +10s late, as lws checks for affected connections every
10s.
This makes it easy for user code to choose the size of the per-thread
buffer used by various things in lws, including file transfer chunking.
Previously it was 4096, if you leave info.pt_serv_buf_size as zero that
is still the default.
With some caveats, you can increase transfer efficiency by increasing it
to, eg, 128KiB, if that makes sense for your memory situation.
Signed-off-by: Andy Green <andy@warmcat.com>
While checking with ab, I found
commit 30cdb3ac8f
Author: Justin Chen <justinchen00@github.invalid.com>
Date: Thu Apr 14 21:40:53 2016 +0800
recv treat zero return as error
https://github.com/warmcat/libwebsockets/issues/475
turned ab performance to crap, reverting it made everything fast again.
recv manpage says there is three ways to get zero returned
1) When a stream socket peer has performed an orderly shutdown, the return value will be 0 (the traditional "end-of-file"
return).
2) Datagram sockets in various domains (e.g., the UNIX and Internet domains) permit zero-length datagrams. When such a
datagram is received, the return value is 0.
3) The value 0 may also be returned if the requested number of bytes to receive from a stream socket was 0.
we can't just assume it means the peer shut down.
If the peer shut down, then the event loop should get an event on the socket like POLLHUP and deal with it that way.
So the patch mentioned above is simply reverted here.
Signed-off-by: Andy Green <andy@warmcat.com>
This adds the ability to store apache-compatible logs to a file given at
vhost-creation time.
lwsws conf can set it per-vhost using "access-log": "<filepath>"
The feature defaults to disabled at cmake, it can be set independently but
LWS_WITH_LWSWS set it on.
Signed-off-by: Andy Green <andy@warmcat.com>
https://github.com/warmcat/libwebsockets/issues/489
This
1) fixes the vhost changes on master
2) works around the ah pool changes
3) fixes some other build problems that appeared
4) hacks out physical flow control for internal streams
5) updates the advertised protocol to h2 needed by, eg, chrome 51
That gets it able to serve small (<4K, ie, one packet) files over http2
Signed-off-by: Andy Green <andy@warmcat.com>
If you enable -DLWS_WITH_HTTP_PROXY=1 at cmake, the test server has a
new URI path http://localhost:7681/proxytest If you visit here, a client
connection to http://example.com:80 is spawned, and the results piped on
to your original connection.
Also with LWS_WITH_HTTP_PROXY enabled at cmake, lws wants to link to an
additional library, "libhubbub". This allows lws to do html rewriting on the
fly, adjusting proxied urls in a lightweight and fast way.
This adds an info member that allows the user code to
set the library's network action timeout in seconds.
If left at the default 0, the build-time default
AWAITING_TIMEOUT continues to be used.
As suggested
https://github.com/warmcat/libwebsockets/issues/427
Signed-off-by: Andy Green <andy.green@linaro.org>
This adds support for multithreaded service to lws without adding any
threading or locking code in the library.
At context creation time you can request split the service part of the
context into n service domains, which are load-balanced so that the most
idle one gets the next listen socket accept.
There's a single listen socket on one port still.
User code may then spawn n threads doing n service loops / poll()s
simultaneously. Locking is only required (I think) in the existing
FD lock callbacks already handled by the pthreads server example,
and that locking takes place in user code. So the library remains
completely agnostic about the threading / locking scheme.
And by default, it's completely compatible with one service thread
so no changes are required by people uninterested in multithreaded
service.
However for people interested in extremely lightweight mass http[s]/
ws[s] service with minimum provisioning, the library can now do
everything out of the box.
To test it, just try
$ libwebsockets-test-server-pthreads -j 8
where -j controls the number of service threads
Signed-off-by: Andy Green <andy.green@linaro.org>
After "rerelease"
https://github.com/warmcat/libwebsockets/issues/392#issuecomment-170003294
Since we introduced partial buffering a long while ago,
user code shold never see partial sends and very few
user callbsck attempt to deal with them.
Let's just eliminate the whole concept of user callback
partial send handling under any circumstances.
Signed-off-by: Andy Green <andy.green@linaro.org>
Server side has had immediate RX flow control for quite a while.
But client side made do with RX continuing until what had been received was exhausted.
For what Autobahn tests, that's not enough.
This patch gives clientside RX flow control the same immediate effect as the server
side enjoys, re-using the same code.
Signed-off-by: Andy Green <andy.green@linaro.org>
Again we treat user code sending zero length things as a bug in user code.
But Autobahn insists to be able to do it, so now we allow it.
That buys us a pass on Autobahn test 1.1.1 (the first of a bazillion)
Reproduce with
libwebsockets-test-echo --client localhost --port 9001 -u "/runCase?case=1&agent=libwebsockets" -v -d 65535 -n 1
Signed-off-by: Andy Green <andy.green@linaro.org>
This adds an api lws_close_reason() which lets you control what will
be sent in the close frame when the connection is closed by returning
nonzero from the user callback.
The test server demo is extended to prove it works in both directions.
With this, we should have nice close support.
https://github.com/warmcat/libwebsockets/issues/196
Signed-off-by: Andy Green <andy.green@linaro.org>
The only guy who cared about this for a long while
(since I eliminated the pre-standard protocol variants)
was sending a close frame.
- Set it to 0 so old code remains happy. It only affects
user code buffer commit, if there's overcommit no harm
done so no effect directly on user ABI.
- Remove all uses inside the library. The sample apps
don't have it any more and that's the recommendation now.
Signed-off-by: Andy Green <andy.green@linaro.org>
- Mainly symbol length reduction
- Whitespace clean
- Code refactor for linear flow
- Audit @Context for API docs vs changes
Signed-off-by: Andy Green <andy.green@linaro.org>
Since struct lws (wsi) now has his own context pointer,
we were able to remove the need for passing context
almost everywhere in the apis.
In turn, that means there's no real use for context being
passed to every callback; in the rare cases context is
needed user code can get it with lws_get_ctx(wsi)
Signed-off-by: Andy Green <andy.green@linaro.org>
Extend the cleanout caused by wsi having a context pointer
into the public api.
There's no point keeping the 1.5 compatibility work,
we have changed the api in several places and
rebuilt wasn't going to be enough a while ago.
Signed-off-by: Andy Green <andy.green@linaro.org>
Now we bit the bullet and gave each wsi an lws_context *, many
internal apis that take both a context and wsi parameter only
need the wsi.
Also simplify parser code by making a temp var for
allocated_headers * instead of the longwinded
dereference chain everywhere.
Signed-off-by: Andy Green <andy.green@linaro.org>
Having the lws_context alone doesn't let us track state or act different
by wsi, which is the most interesting usecase. Eg not only simply track
file position / decompression state per wsi but also act differently
according to wsi authentication state / associated cookies.
Signed-off-by: Andy Green <andy.green@linaro.org>
This is a rewrite of the patch from Soapyman here
https://github.com/warmcat/libwebsockets/pull/363
The main changes compared to Soapyman's original patch are
- There's no new stuff in the info struct user code does any overrides
it may want to do explicitly after lws_context_create returns
- User overrides for file ops can call through (subclass) to the original
platform implementation using lws_get_fops_plat()
- A typedef is provided for plat-specific fd type
- Public helpers are provided to allow user code to be platform-independent
about file access, using the lws platform file operations underneath:
static inline lws_filefd_type
lws_plat_file_open(struct lws_plat_file_ops *fops, const char *filename,
unsigned long *filelen, int flags)
static inline int
lws_plat_file_close(struct lws_plat_file_ops *fops, lws_filefd_type fd)
static inline unsigned long
lws_plat_file_seek_cur(struct lws_plat_file_ops *fops, lws_filefd_type fd,
long offset_from_cur_pos)
static inline int
lws_plat_file_read(struct lws_plat_file_ops *fops, lws_filefd_type fd,
unsigned long *amount, unsigned char *buf, unsigned long len)
static inline int
lws_plat_file_write(struct lws_plat_file_ops *fops, lws_filefd_type fd,
unsigned long *amount, unsigned char *buf, unsigned long len)
There's example documentation and implementation in the test server.
Signed-off-by: Andy Green <andy.green@linaro.org>
This nukes all the oldstyle prefixes except in the compatibility code.
struct libwebsockets becomes struct lws too.
The api docs are updated accordingly as are the READMEs that mention
those apis.
Signed-off-by: Andy Green <andy.green@linaro.org>
Between changing to lws_ a few years ago and the previous two
patches migrating the public apis, there are only a few
internal functions left using libwebsocket_*.
Change those to also use lws_ without regard to compatibility
since they were never visible outside the library.
Signed-off-by: Andy Green <andy.green@linaro.org>
