/* * Copyright 2010 Stefan Lankes, Chair for Operating Systems, * RWTH Aachen University * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * This file is part of MetalSVM. * * This code based mostly on the online manual http://www.lowlevel.eu/wiki/RTL8139 */ #include #include #include #include #include #include #include #include #if defined(CONFIG_LWIP) && defined(CONFIG_PCI) #include #include #include #include #include #include board_t board_tbl[] = { {"RealTek", "RealTek RTL8139", 0x10ec, 0x8139}, {"RealTek", "RealTek RTL8129 Fast Ethernet", 0x10ec, 0x8129}, {"RealTek", "RealTek RTL8139B PCI", 0x10ec, 0x8138}, {"SMC", "SMC1211TX EZCard 10/100 (RealTek RTL8139)", 0x1113, 0x1211}, {"D-Link", "D-Link DFE-538TX (RTL8139)", 0x1186, 0x1300}, {"LevelOne", "LevelOne FPC-0106Tx (RTL8139)", 0x018a, 0x0106}, {"Compaq", "Compaq HNE-300 (RTL8139c)", 0x021b, 0x8139}, {NULL,}, }; static struct netif* mynetif = NULL; /* * @return error code * - ERR_OK: packet transferred to hardware * - ERR_CONN: no link or link failure * - ERR_IF: could not transfer to link (hardware buffer full?) */ static err_t rtl8139if_output(struct netif* netif, struct pbuf* p) { rtl1839if_t* rtl8139if = netif->state; uint8_t transmitid = rtl8139if->tx_queue % 4; uint32_t i; struct pbuf *q; if (BUILTIN_EXPECT((rtl8139if->tx_queue - rtl8139if->tx_complete) > 3, 0)) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_output: too many packets at once\n")); return ERR_IF; } if (BUILTIN_EXPECT(p->tot_len > 1792, 0)) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_output: packet is longer than 1792 bytes\n")); return ERR_IF; } if (rtl8139if->tx_inuse[transmitid] == 1) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_output: %i already inuse\n", transmitid)); return ERR_IF; } if (inportb(rtl8139if->iobase + MSR) & MSR_LINKB) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_output: link failure\n")); return ERR_CONN; } rtl8139if->tx_queue++; rtl8139if->tx_inuse[transmitid] = 1; #if ETH_PAD_SIZE pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ #endif /* * q traverses through linked list of pbuf's * This list MUST consist of a single packet ONLY */ for (q = p, i = 0; q != 0; q = q->next) { memcpy(rtl8139if->tx_buffer[transmitid] + i, q->payload, q->len); i += q->len; } // send the packet outportl(rtl8139if->iobase + TSD0 + (4 * transmitid), p->tot_len);//|0x3A0000); #if ETH_PAD_SIZE pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ #endif LINK_STATS_INC(link.xmit); return ERR_OK; } #if 0 void rtl8139if_input(struct netif* netif, struct pbuf* p) { struct eth_hdr *ethhdr; /* points to packet payload, which starts with an Ethernet header */ ethhdr = p->payload; switch (htons(ethhdr->type)) { /* IP or ARP packet? */ case ETHTYPE_ARP: case ETHTYPE_IP: #if PPPOE_SUPPORT /* PPPoE packet? */ case ETHTYPE_PPPOEDISC: case ETHTYPE_PPPOE: #endif /* PPPOE_SUPPORT */ /* full packet send to tcpip_thread to process */ if (mynetif->input(p, mynetif) != ERR_OK) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_input: IP input error\n")); pbuf_free(p); } break; default: pbuf_free(p); break; } } #endif static void rtl_rx_inthandler(struct netif* netif) { rtl1839if_t* rtl8139if = netif->state; uint16_t header; uint16_t length, i; uint8_t cmd; struct pbuf *p = NULL; struct pbuf* q; cmd = inportb(rtl8139if->iobase + CR); while(!(cmd & CR_BUFE)) { header = *((uint16_t*) (rtl8139if->rx_buffer+rtl8139if->rx_pos)); rtl8139if->rx_pos = (rtl8139if->rx_pos + 2) % (8192+16); if (header & ISR_ROK) { length = *((uint16_t*) (rtl8139if->rx_buffer+rtl8139if->rx_pos)) - 4; // copy packet (but not the CRC) rtl8139if->rx_pos = (rtl8139if->rx_pos + 2) % (8192+16); #if ETH_PAD_SIZE length += ETH_PAD_SIZE; /* allow room for Ethernet padding */ #endif p = pbuf_alloc(PBUF_RAW, length, PBUF_POOL); if (p) { #if ETH_PAD_SIZE pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ #endif for (q=p; q!=NULL; q=q->next) { for(i=0; ilen; i++) { ((uint8_t*) q->payload)[i] = rtl8139if->rx_buffer[rtl8139if->rx_pos]; rtl8139if->rx_pos = (rtl8139if->rx_pos + 1) % (8192+16); } } #if ETH_PAD_SIZE pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ #endif mailbox_ptr_post(&rtl8139if->mbox, (void*)p); //rtl8139if_input(netif, p); LINK_STATS_INC(link.recv); } else { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_rx_inthandler: not enough memory!\n")); rtl8139if->rx_pos += (rtl8139if->rx_pos + length) % (8192+16); LINK_STATS_INC(link.memerr); LINK_STATS_INC(link.drop); } // packets are dword aligned rtl8139if->rx_pos = ((rtl8139if->rx_pos + 4 + 3) & ~0x3) % (8192+16); outportw(rtl8139if->iobase + CAPR, rtl8139if->rx_pos - 0x10); } else { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_rx_inthandler: invalid header!\n")); LINK_STATS_INC(link.memerr); LINK_STATS_INC(link.drop); break; } cmd = inportb(rtl8139if->iobase + CR); } } static void rtl_tx_inthandler(struct netif* netif) { rtl1839if_t* rtl8139if = netif->state; uint32_t checks = rtl8139if->tx_queue - rtl8139if->tx_complete; uint32_t txstatus; uint8_t tmp8; while(checks > 0) { tmp8 = rtl8139if->tx_complete % 4; txstatus = inportl(rtl8139if->iobase + TSD0 + tmp8 * 4); if (!(txstatus & (TSD_TOK|TSD_TUN|TSD_TABT))) return; if (txstatus & (TSD_TABT | TSD_OWC)) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139_tx_inthandler: major error\n")); continue; } if (txstatus & TSD_TUN) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139_tx_inthandler: transmit underrun\n")); } if (txstatus & TSD_TOK) { rtl8139if->tx_inuse[tmp8] = 0; rtl8139if->tx_complete++; checks--; } } } static void rtl8139if_handler(struct state* s) { rtl1839if_t* rtl8139if = mynetif->state; uint16_t isr_contents; while (1) { isr_contents = inportw(rtl8139if->iobase + ISR); if (isr_contents == 0) break; if (isr_contents & ISR_ROK) { rtl_rx_inthandler(mynetif); outportw(rtl8139if->iobase + ISR, ISR_ROK); } if (isr_contents & ISR_TOK) { rtl_tx_inthandler(mynetif); outportw(rtl8139if->iobase + ISR, ISR_TOK); } if (isr_contents & ISR_RER) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_handler: RX error detected!\n")); outportw(rtl8139if->iobase + ISR, ISR_RER); } if (isr_contents & ISR_TER) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_handler: TX error detected!\n")); outportw(rtl8139if->iobase + ISR, ISR_TER); } if (isr_contents & ISR_RXOVW) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_handler: RX overflow detected!\n")); outportw(rtl8139if->iobase + ISR, ISR_RXOVW); } } } err_t rtl8139if_wait(struct netif* netif, uint32_t poll) { rtl1839if_t* rtl8139if = netif->state; struct eth_hdr *ethhdr; struct pbuf *p = NULL; err_t err = ERR_OK; if (poll) { if (mailbox_ptr_tryfetch(&(rtl8139if->mbox), (void**) &p)) return err; } else { mailbox_ptr_fetch(&(rtl8139if->mbox), (void**) &p); } /* points to packet payload, which starts with an Ethernet header */ ethhdr = p->payload; switch (htons(ethhdr->type)) { /* IP or ARP packet? */ case ETHTYPE_ARP: case ETHTYPE_IP: #if PPPOE_SUPPORT /* PPPoE packet? */ case ETHTYPE_PPPOEDISC: case ETHTYPE_PPPOE: #endif /* PPPOE_SUPPORT */ /* full packet send to tcpip_thread to process */ if ((err = mynetif->input(p, mynetif)) != ERR_OK) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_poll: IP input error\n")); pbuf_free(p); } break; default: pbuf_free(p); break; } return err; } err_t rtl8139if_init(struct netif* netif) { rtl1839if_t* rtl8139if; uint32_t tmp32; uint16_t tmp16, speed; uint8_t tmp8; static uint8_t num = 0; //task_t* task = per_core(current_task); LWIP_ASSERT("netif != NULL", (netif != NULL)); rtl8139if = kmalloc(sizeof(rtl1839if_t)); if (!rtl8139if) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_init: out of memory\n")); return ERR_MEM; } memset(rtl8139if, 0, sizeof(rtl1839if_t)); /* allocate the receive buffer */ rtl8139if->rx_buffer = mem_allocation(8192+16, MAP_KERNEL_SPACE|MAP_NO_CACHE); if (!(rtl8139if->rx_buffer)) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_init: out of memory\n")); kfree(rtl8139if, sizeof(rtl1839if_t)); return ERR_MEM; } memset(rtl8139if->rx_buffer, 0, 8192+16); /* allocate the send buffers */ rtl8139if->tx_buffer[0] = mem_allocation(4*4096, MAP_KERNEL_SPACE|MAP_NO_CACHE); if (!(rtl8139if->tx_buffer[0])) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_init: out of memory\n")); kfree(rtl8139if->rx_buffer, 8192+16); kfree(rtl8139if, sizeof(rtl1839if_t)); return ERR_MEM; } memset(rtl8139if->tx_buffer[0], 0, 4*4096); rtl8139if->tx_buffer[1] = rtl8139if->tx_buffer[0] + 4096; rtl8139if->tx_buffer[2] = rtl8139if->tx_buffer[1] + 4096; rtl8139if->tx_buffer[3] = rtl8139if->tx_buffer[2] + 4096; mailbox_ptr_init(&rtl8139if->mbox); netif->state = rtl8139if; mynetif = netif; tmp8 = 0; while (board_tbl[tmp8].vendor_str) { if (pci_get_device_info(board_tbl[tmp8].vendor, board_tbl[tmp8].device, &rtl8139if->iobase, &rtl8139if->irq) == 0) break; tmp8++; } if (!board_tbl[tmp8].vendor_str) return ERR_ARG; tmp32 = inportl(rtl8139if->iobase + TCR); if (tmp32 == 0xFFFFFF) { LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_init: ERROR\n")); return ERR_ARG; } // determine the hardware revision //tmp32 = (tmp32 & TCR_HWVERID) >> TCR_HWOFFSET; irq_install_handler(rtl8139if->irq+32, rtl8139if_handler); LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_init: found %s at iobase 0x%x (irq %u)\n", board_tbl[tmp8].device_str, rtl8139if->iobase, rtl8139if->irq)); // determine the mac address of this card LWIP_DEBUGF(NETIF_DEBUG, ("rtl8139if_init: MAC address ")); for (tmp8=0; tmp8<6; tmp8++) { mynetif->hwaddr[tmp8] = inportb(rtl8139if->iobase + IDR0 + tmp8); LWIP_DEBUGF(NETIF_DEBUG, ("%02x ", mynetif->hwaddr[tmp8])); } LWIP_DEBUGF(NETIF_DEBUG, ("\n")); // Software reset outportb(rtl8139if->iobase + CR, CR_RST); /* * The RST bit must be checked to make sure that the chip has finished the reset. * If the RST bit is high (1), then the reset is still in operation. */ udelay(10000); tmp16 = 10000; while ((inportb(rtl8139if->iobase + CR) & CR_RST) && tmp16 > 0) { tmp16--; } if (!tmp16) { // it seems not to work kprintf("RTL8139 reset failed\n"); return ERR_ARG; } // Enable Receive and Transmitter outportb(rtl8139if->iobase + CR, CR_TE|CR_RE); // Sets the RE and TE bits high // lock config register outportb(rtl8139if->iobase + CR9346, CR9346_EEM1 | CR9346_EEM0); // clear all of CONFIG1 outportb(rtl8139if->iobase + CONFIG1, 0); // disable driver loaded and lanwake bits, turn driver loaded bit back on outportb(rtl8139if->iobase + CONFIG1, (inportb(rtl8139if->iobase + CONFIG1) & ~(CONFIG1_DVRLOAD | CONFIG1_LWACT)) | CONFIG1_DVRLOAD); // unlock config register outportb(rtl8139if->iobase + CR9346, 0); /* * configure receive buffer * AB - Accept Broadcast: Accept broadcast packets sent to mac ff:ff:ff:ff:ff:ff * AM - Accept Multicast: Accept multicast packets. * APM - Accept Physical Match: Accept packets send to NIC's MAC address. * AAP - Accept All Packets. Accept all packets (run in promiscuous mode). */ outportl(rtl8139if->iobase + RCR, RCR_MXDMA2|RCR_MXDMA1|RCR_MXDMA0|RCR_AB|RCR_AM|RCR_APM|RCR_AAP); // The WRAP bit isn't set // set the transmit config register to // be the normal interframe gap time // set DMA max burst to 64bytes outportl(rtl8139if->iobase + TCR, TCR_IFG|TCR_MXDMA0|TCR_MXDMA1|TCR_MXDMA2); // register the receive buffer outportl(rtl8139if->iobase + RBSTART, virt_to_phys((size_t) rtl8139if->rx_buffer)); // set each of the transmitter start address descriptors outportl(rtl8139if->iobase + TSAD0, virt_to_phys((size_t) rtl8139if->tx_buffer[0])); outportl(rtl8139if->iobase + TSAD1, virt_to_phys((size_t) rtl8139if->tx_buffer[1])); outportl(rtl8139if->iobase + TSAD2, virt_to_phys((size_t) rtl8139if->tx_buffer[2])); outportl(rtl8139if->iobase + TSAD3, virt_to_phys((size_t) rtl8139if->tx_buffer[3])); /* * To set the RTL8139 to accept only the Transmit OK (TOK) and Receive OK (ROK) * interrupts, we would have the TOK and ROK bits of the IMR high and leave the * rest low. That way when a TOK or ROK IRQ happens, it actually will go through * and fire up an IRQ. */ outportw(rtl8139if->iobase + IMR, ISR_ROK|ISR_TOK|ISR_RXOVW|ISR_TER|ISR_RER); outportw(rtl8139if->iobase + BMCR, BMCR_ANE); tmp16 = inportw(rtl8139if->iobase + BMCR); if (tmp16 & BMCR_SPD1000) speed = 1000; else if (tmp16 & BMCR_SPD100) speed = 100; else speed = 10; // Enable Receive and Transmitter outportb(rtl8139if->iobase + CR, CR_TE|CR_RE); // Sets the RE and TE bits high kprintf("RTL8139: CR = 0x%x, ISR = 0x%x, speed = %u mbps\n", inportb(rtl8139if->iobase + CR), inportw(rtl8139if->iobase + ISR), speed); /* * Initialize the snmp variables and counters inside the struct netif. * The last argument should be replaced with your link speed, in units * of bits per second. */ NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, speed); /* administrative details */ netif->name[0] = 'e'; netif->name[1] = 'n'; netif->num = num; num++; /* downward functions */ netif->output = etharp_output; netif->linkoutput = rtl8139if_output; /* maximum transfer unit */ netif->mtu = 1500; /* broadcast capability */ netif->flags |= NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP; /* hardware address length */ netif->hwaddr_len = 6; rtl8139if->ethaddr = (struct eth_addr *)netif->hwaddr; return ERR_OK; } #endif