updated buildsystem (fixes missing install-sh)

This commit is contained in:
Steffen Vogel 2011-09-15 21:44:00 +02:00
parent d11ac57848
commit 44f9784732
15 changed files with 12235 additions and 287 deletions

7
.gitignore vendored
View File

@ -24,16 +24,13 @@ Makefile
# autoconf
/autom4te.cache
/aclocal.m4
/compile
/depcomp
/install-sh
/missing
/config.status
/config.log
/config.h
stamp-h1
/libtool
# Debian packaging
/debian/config.log

View File

@ -1 +1,4 @@
vzlogger is build with the GNU Autotools buildsystem. All required files
are included in this repository. There is no dependecy on autotools!
Just use the standard './configure && make && make install' triplet

View File

@ -1,6 +1,6 @@
sysconf_DATA = etc/vzlogger.conf
SUBDIRS = src docs bin/vzlogger
SUBDIRS = src docs bin/logger
if READER_BUILD
SUBDIRS += bin/reader

View File

@ -90,7 +90,7 @@ AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = src docs bin/vzlogger bin/reader
DIST_SUBDIRS = src docs bin/logger bin/reader
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
@ -250,7 +250,7 @@ top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
sysconf_DATA = etc/vzlogger.conf
SUBDIRS = src docs bin/vzlogger $(am__append_1)
SUBDIRS = src docs bin/logger $(am__append_1)
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive

9593
aclocal.m4 vendored Normal file

File diff suppressed because it is too large Load Diff

View File

@ -1,13 +1,14 @@
# what flags you want to pass to the C compiler & linker
AM_CFLAGS = -Wall -D_REENTRANT -std=gnu99 $(DEPS_CFLAGS)
AM_CFLAGS = -Wall -D_REENTRANT -std=gnu99 $(DEPS_VZ_CFLAGS)
AM_CPPFLAGS = -I$(top_srcdir)/include -Iinclude
AM_LDFLAGS =
# SML
####################################################################
if SML_SUPPORT
bin_PROGRAMS = smlreader
smlreader_SOURCES = smlreader.c
smlreader_LDADD = -lm $(DEPS_SML_LIBS)
smlreader_CFLAGS = $(AM_CFLAGS) $(DEPS_SML_CFLAGS)
smlreader_SOURCES = src/smlreader.c
smlreader_LDADD = -lm $(DEPS_SML_LIBS) ../../src/libobis.la
AM_CFLAGS += $(DEPS_SML_CFLAGS)
endif

View File

@ -35,6 +35,7 @@ POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@SML_SUPPORT_TRUE@bin_PROGRAMS = smlreader$(EXEEXT)
@SML_SUPPORT_TRUE@am__append_1 = $(DEPS_SML_CFLAGS)
subdir = bin/reader
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@ -47,15 +48,12 @@ CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
PROGRAMS = $(bin_PROGRAMS)
am__smlreader_SOURCES_DIST = smlreader.c
@SML_SUPPORT_TRUE@am_smlreader_OBJECTS = \
@SML_SUPPORT_TRUE@ smlreader-smlreader.$(OBJEXT)
am__smlreader_SOURCES_DIST = src/smlreader.c
@SML_SUPPORT_TRUE@am_smlreader_OBJECTS = smlreader.$(OBJEXT)
smlreader_OBJECTS = $(am_smlreader_OBJECTS)
am__DEPENDENCIES_1 =
@SML_SUPPORT_TRUE@smlreader_DEPENDENCIES = $(am__DEPENDENCIES_1)
smlreader_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(smlreader_CFLAGS) \
$(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
@SML_SUPPORT_TRUE@smlreader_DEPENDENCIES = $(am__DEPENDENCIES_1) \
@SML_SUPPORT_TRUE@ ../../src/libobis.la
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
@ -198,11 +196,12 @@ top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# what flags you want to pass to the C compiler & linker
AM_CFLAGS = -Wall -D_REENTRANT -std=gnu99 $(DEPS_CFLAGS)
AM_CFLAGS = -Wall -D_REENTRANT -std=gnu99 $(DEPS_VZ_CFLAGS) \
$(am__append_1)
AM_CPPFLAGS = -I$(top_srcdir)/include -Iinclude
AM_LDFLAGS =
@SML_SUPPORT_TRUE@smlreader_SOURCES = smlreader.c
@SML_SUPPORT_TRUE@smlreader_LDADD = -lm $(DEPS_SML_LIBS)
@SML_SUPPORT_TRUE@smlreader_CFLAGS = $(AM_CFLAGS) $(DEPS_SML_CFLAGS)
@SML_SUPPORT_TRUE@smlreader_SOURCES = src/smlreader.c
@SML_SUPPORT_TRUE@smlreader_LDADD = -lm $(DEPS_SML_LIBS) ../../src/libobis.la
all: all-am
.SUFFIXES:
@ -282,7 +281,7 @@ clean-binPROGRAMS:
rm -f $$list
smlreader$(EXEEXT): $(smlreader_OBJECTS) $(smlreader_DEPENDENCIES)
@rm -f smlreader$(EXEEXT)
$(smlreader_LINK) $(smlreader_OBJECTS) $(smlreader_LDADD) $(LIBS)
$(LINK) $(smlreader_OBJECTS) $(smlreader_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@ -290,7 +289,7 @@ mostlyclean-compile:
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smlreader-smlreader.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smlreader.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@ -313,19 +312,19 @@ distclean-compile:
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
smlreader-smlreader.o: smlreader.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(smlreader_CFLAGS) $(CFLAGS) -MT smlreader-smlreader.o -MD -MP -MF $(DEPDIR)/smlreader-smlreader.Tpo -c -o smlreader-smlreader.o `test -f 'smlreader.c' || echo '$(srcdir)/'`smlreader.c
@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/smlreader-smlreader.Tpo $(DEPDIR)/smlreader-smlreader.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smlreader.c' object='smlreader-smlreader.o' libtool=no @AMDEPBACKSLASH@
smlreader.o: src/smlreader.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT smlreader.o -MD -MP -MF $(DEPDIR)/smlreader.Tpo -c -o smlreader.o `test -f 'src/smlreader.c' || echo '$(srcdir)/'`src/smlreader.c
@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/smlreader.Tpo $(DEPDIR)/smlreader.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/smlreader.c' object='smlreader.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(smlreader_CFLAGS) $(CFLAGS) -c -o smlreader-smlreader.o `test -f 'smlreader.c' || echo '$(srcdir)/'`smlreader.c
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o smlreader.o `test -f 'src/smlreader.c' || echo '$(srcdir)/'`src/smlreader.c
smlreader-smlreader.obj: smlreader.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(smlreader_CFLAGS) $(CFLAGS) -MT smlreader-smlreader.obj -MD -MP -MF $(DEPDIR)/smlreader-smlreader.Tpo -c -o smlreader-smlreader.obj `if test -f 'smlreader.c'; then $(CYGPATH_W) 'smlreader.c'; else $(CYGPATH_W) '$(srcdir)/smlreader.c'; fi`
@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/smlreader-smlreader.Tpo $(DEPDIR)/smlreader-smlreader.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smlreader.c' object='smlreader-smlreader.obj' libtool=no @AMDEPBACKSLASH@
smlreader.obj: src/smlreader.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT smlreader.obj -MD -MP -MF $(DEPDIR)/smlreader.Tpo -c -o smlreader.obj `if test -f 'src/smlreader.c'; then $(CYGPATH_W) 'src/smlreader.c'; else $(CYGPATH_W) '$(srcdir)/src/smlreader.c'; fi`
@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/smlreader.Tpo $(DEPDIR)/smlreader.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/smlreader.c' object='smlreader.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(smlreader_CFLAGS) $(CFLAGS) -c -o smlreader-smlreader.obj `if test -f 'smlreader.c'; then $(CYGPATH_W) 'smlreader.c'; else $(CYGPATH_W) '$(srcdir)/smlreader.c'; fi`
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o smlreader.obj `if test -f 'src/smlreader.c'; then $(CYGPATH_W) 'src/smlreader.c'; else $(CYGPATH_W) '$(srcdir)/src/smlreader.c'; fi`
mostlyclean-libtool:
-rm -f *.lo

143
compile Executable file
View File

@ -0,0 +1,143 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
scriptversion=2009-10-06.20; # UTC
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009 Free Software
# Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand `-c -o'.
Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file `INSTALL'.
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
esac
ofile=
cfile=
eat=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as `compile cc -o foo foo.c'.
# So we strip `-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no `-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# `.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use `[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

1168
configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -4,13 +4,14 @@
AC_PREREQ([2.67])
AC_INIT([vzlogger], [0.2], [http://bugs.volkszaehler.org])
AM_INIT_AUTOMAKE(vzlogger, 0.2)
LT_INIT
AC_CONFIG_SRCDIR([src/meter.c])
AC_CONFIG_HEADERS([config.h])
AC_CONFIG_FILES([Makefile
docs/Makefile
src/Makefile
bin/reader/Makefile
bin/vzlogger/Makefile
bin/logger/Makefile
])
# Checks for programs.

630
depcomp Executable file
View File

@ -0,0 +1,630 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2009-04-28.21; # UTC
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
# Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by `PROGRAMS ARGS'.
object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputing dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
# This is just like msvisualcpp but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u="sed s,\\\\\\\\,/,g"
depmode=msvisualcpp
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
' ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
icc)
# Intel's C compiler understands `-MD -MF file'. However on
# icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# ICC 7.0 will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
# which is wrong. We want:
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
# ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using \ :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
# Add `dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
s/$/:/
p
}' "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
# With Tru64 cc, shared objects can also be used to make a
# static library. This mechanism is used in libtool 1.4 series to
# handle both shared and static libraries in a single compilation.
# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
# compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
tmpdepfile2=$dir$base.o.d # libtool 1.5
tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.o.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
tmpdepfile4=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for `:'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
"$@" $dashmflag |
sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no eat=no
for arg
do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
if test $eat = yes; then
eat=no
continue
fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-arch)
eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E |
sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
IFS=" "
for arg
do
case "$arg" in
-o)
shift
;;
$object)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvcmsys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

520
install-sh Executable file
View File

@ -0,0 +1,520 @@
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2009-04-28.21; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
nl='
'
IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
doit_exec=$doit
fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
shift;;
-T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
trap '(exit $?); exit' 1 2 13 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writeable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
-*) prefix='./';;
*) prefix='';;
esac
eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
$posix_glob set -f
set fnord $dstdir
shift
$posix_glob set +f
IFS=$oIFS
prefixes=
for d
do
test -z "$d" && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
eval "$initialize_posix_glob" &&
$posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
$posix_glob set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

376
missing Executable file
View File

@ -0,0 +1,376 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
scriptversion=2009-04-28.21; # UTC
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
# 2008, 2009 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
msg="missing on your system"
case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
# Exit code 63 means version mismatch. This often happens
# when the user try to use an ancient version of a tool on
# a file that requires a minimum version. In this case we
# we should proceed has if the program had been absent, or
# if --run hadn't been passed.
if test $? = 63; then
run=:
msg="probably too old"
fi
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
\`g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
esac
# normalize program name to check for.
program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program). This is about non-GNU programs, so use $1 not
# $program.
case $1 in
lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
tar*)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
exit 1
fi
;;
*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
# running `$TOOL --version' or `$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case $program in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te*)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
proper tools for further handling them.