stv0g/yosys
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Merge pull request #1 from azonenberg-hk/master

Browse source 
Pull changes from HK trip
This commit is contained in:
Andrew Zonenberg 2016-12-23 12:32:55 -08:00 • committed by GitHub
commit 5ffede5c0e
19 changed files with 586 additions and 70 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
.gitignore vendored
View file

@ -1,6 +1,7 @@
*.o
*.d
.*.swp
*.gch
/.cproject
/.project
/.settings
@ -27,3 +28,5 @@
/yosys-win32-vcxsrc-*
/yosysjs-*
/libyosys.so
/tests/unit/bintest/
/tests/unit/objtest/

69
CodingReadme
View file

@ -411,3 +411,72 @@ Updating the website:
git commit -am update
make push
How to add unit test
====================
Unit test brings some advantages, briefly, we can list some of them (reference
[1](https://en.wikipedia.org/wiki/Unit_testing)):
* Tests reduce bugs in new features;
* Tests reduce bugs in existing features;
* Tests are good documentation;
* Tests reduce the cost of change;
* Tests allow refactoring;
With those advantages in mind, it was required to choose a framework which fits
well with C/C++ code. Hence, it was chosen (google test)
[https://github.com/google/googletest], because it is largely used and it is
relatively easy learn.
Install and configure google test (manually)
--------------------------------------------
In this section, you will see a brief description of how to install google
test. However, it is strongly recommended that you take a look to the official
repository (https://github.com/google/googletest) and refers to that if you
have any problem to install it. Follow the steps below:
* Install: cmake and pthread
* Clone google test project from: https://github.com/google/googletest and
enter in the project directory
* Inside project directory, type:
```
cmake -DBUILD_SHARED_LIBS=ON .
make
```
* After compilation, copy all "*.so" inside directory "googlemock" and
"googlemock/gtest" to "/usr/lib/"
* Done! Now you can compile your tests.
If you have any problem, go to the official repository to find help.
Ps.: Some distros already have googletest packed. If your distro supports it,
you can use it instead of compile.
Create new unit test
--------------------
If you want to add new unit tests for Yosys, just follow the steps below:
* Go to directory "yosys/test/unit/"
* In this directory you can find something similar Yosys's directory structure.
To create your unit test file you have to follow this pattern:
fileNameToImplementUnitTest + Test.cc. E.g.: if you want to implement the
unit test for kernel/celledges.cc, you will need to create a file like this:
tests/unit/kernel/celledgesTest.cc;
* Implement your unit test
Run unit test
-------------
To compile and run all unit tests, just go to yosys root directory and type:
```
make unit-test
```
If you want to remove all unit test files, type:
```
make clean-unit-test
```

13
Makefile
View file

@ -45,6 +45,9 @@ TARGETS = yosys$(EXE) yosys-config
PRETTY = 1
SMALL = 0
# Unit test
UNITESTPATH := tests/unit
all: top-all
YOSYS_SRC := $(dir $(firstword $(MAKEFILE_LIST)))
@ -83,7 +86,7 @@ OBJS = kernel/version_$(GIT_REV).o
# is just a symlink to your actual ABC working directory, as 'make mrproper'
# will remove the 'abc' directory and you do not want to accidentally
# delete your work on ABC..
ABCREV = 8b555d9e67cf
ABCREV = a4872e22c646
ABCPULL = 1
ABCURL ?= https://bitbucket.org/alanmi/abc
ABCMKARGS = CC="$(CXX)" CXX="$(CXX)"
@ -447,6 +450,14 @@ vloghtb: $(TARGETS) $(EXTRA_TARGETS)
@echo " Passed \"make vloghtb\"."
@echo ""
# Unit test
unit-test: libyosys.so
@$(MAKE) -C $(UNITESTPATH) CXX="$(CXX)" CPPFLAGS="$(CPPFLAGS)" \
CXXFLAGS="$(CXXFLAGS)" LDLIBS="$(LDLIBS)" ROOTPATH="$(CURDIR)"
clean-unit-test:
@$(MAKE) -C $(UNITESTPATH) clean
install: $(TARGETS) $(EXTRA_TARGETS)
$(INSTALL_SUDO) mkdir -p $(DESTDIR)$(BINDIR)
$(INSTALL_SUDO) install $(TARGETS) $(DESTDIR)$(BINDIR)

7
backends/aiger/aiger.cc
View file

@ -163,6 +163,13 @@ struct AigerWriter
continue;
}
if (cell->type == "$anyconst")
{
for (auto bit : sigmap(cell->getPort("\\Y")))
ff_map[bit] = bit;
continue;
}
log_error("Unsupported cell type: %s (%s)\n", log_id(cell->type), log_id(cell));
}

60
frontends/verilog/verilog_frontend.cc
View file

@ -436,6 +436,66 @@ struct VerilogDefaults : public Pass {
}
} VerilogDefaults;
struct VerilogDefines : public Pass {
VerilogDefines() : Pass("verilog_defines", "define and undefine verilog defines") { }
virtual void help()
{
// |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
log("\n");
log(" verilog_defines [options]\n");
log("\n");
log("Define and undefine verilog preprocessor macros.\n");
log("\n");
log(" -Dname[=definition]\n");
log(" define the preprocessor symbol 'name' and set its optional value\n");
log(" 'definition'\n");
log("\n");
log(" -Uname[=definition]\n");
log(" undefine the preprocessor symbol 'name'\n");
log("\n");
}
virtual void execute(std::vector<std::string> args, RTLIL::Design *design)
{
size_t argidx;
for (argidx = 1; argidx < args.size(); argidx++) {
std::string arg = args[argidx];
if (arg == "-D" && argidx+1 < args.size()) {
std::string name = args[++argidx], value;
size_t equal = name.find('=');
if (equal != std::string::npos) {
value = name.substr(equal+1);
name = name.substr(0, equal);
}
design->verilog_defines[name] = std::pair<std::string, bool>(value, false);
continue;
}
if (arg.compare(0, 2, "-D") == 0) {
size_t equal = arg.find('=', 2);
std::string name = arg.substr(2, equal-2);
std::string value;
if (equal != std::string::npos)
value = arg.substr(equal+1);
design->verilog_defines[name] = std::pair<std::string, bool>(value, false);
continue;
}
if (arg == "-U" && argidx+1 < args.size()) {
std::string name = args[++argidx];
design->verilog_defines.erase(name);
continue;
}
if (arg.compare(0, 2, "-U") == 0) {
std::string name = arg.substr(2);
design->verilog_defines.erase(name);
continue;
}
break;
}
if (args.size() != argidx)
cmd_error(args, argidx, "Extra argument.");
}
} VerilogDefines;
YOSYS_NAMESPACE_END
// the yyerror function used by bison to report parser errors

11
kernel/driver.cc
View file

@ -218,6 +218,9 @@ int main(int argc, char **argv)
printf(" yosys_dump_<header_id>.il is used as filename if none is specified.\n");
printf(" Use 'ALL' as <header_id> to dump at every header.\n");
printf("\n");
printf(" -W regex\n");
printf(" print a warning for all log messages matching the regex \n");
printf("\n");
printf(" -V\n");
printf(" print version information and exit\n");
printf("\n");
@ -238,7 +241,7 @@ int main(int argc, char **argv)
}
int opt;
while ((opt = getopt(argc, argv, "MXAQTVSm:f:Hh:b:o:p:l:L:qv:tds:c:D:")) != -1)
while ((opt = getopt(argc, argv, "MXAQTVSm:f:Hh:b:o:p:l:L:qv:tds:c:W:D:")) != -1)
{
switch (opt)
{
@ -320,6 +323,12 @@ int main(int argc, char **argv)
scriptfile = optarg;
scriptfile_tcl = true;
break;
case 'W':
log_warn_regexes.push_back(std::regex(optarg,
std::regex_constants::nosubs |
std::regex_constants::optimize |
std::regex_constants::egrep));
break;
case 'D':
{
auto args = split_tokens(optarg, ":");

31
kernel/log.cc
View file

@ -41,6 +41,7 @@ YOSYS_NAMESPACE_BEGIN
std::vector<FILE*> log_files;
std::vector<std::ostream*> log_streams;
std::map<std::string, std::set<std::string>> log_hdump;
std::vector<std::regex> log_warn_regexes;
bool log_hdump_all = false;
FILE *log_errfile = NULL;
SHA1 *log_hasher = NULL;
@ -136,6 +137,32 @@ void logv(const char *format, va_list ap)
for (auto f : log_streams)
*f << str;
static std::string linebuffer;
static bool log_warn_regex_recusion_guard = false;
if (!log_warn_regex_recusion_guard)
{
log_warn_regex_recusion_guard = true;
if (log_warn_regexes.empty())
{
linebuffer.clear();
}
else
{
linebuffer += str;
if (!linebuffer.empty() && linebuffer.back() == '\n') {
for (auto &re : log_warn_regexes)
if (std::regex_search(linebuffer, re))
log_warning("Found log message matching -W regex:\n%s", str.c_str());
linebuffer.clear();
}
}
log_warn_regex_recusion_guard = false;
}
}
void logv_header(RTLIL::Design *design, const char *format, va_list ap)
@ -262,8 +289,8 @@ void log_cmd_error(const char *format, ...)
void log_spacer()
{
while (log_newline_count < 2)
log("\n");
if (log_newline_count < 2) log("\n");
if (log_newline_count < 2) log("\n");
}
void log_push()

2
kernel/log.h
View file

@ -23,6 +23,7 @@
#define LOG_H
#include <time.h>
#include <regex>
#ifndef _WIN32
# include <sys/time.h>
@ -48,6 +49,7 @@ struct log_cmd_error_exception { };
extern std::vector<FILE*> log_files;
extern std::vector<std::ostream*> log_streams;
extern std::map<std::string, std::set<std::string>> log_hdump;
extern std::vector<std::regex> log_warn_regexes;
extern bool log_hdump_all;
extern FILE *log_errfile;
extern SHA1 *log_hasher;

2
kernel/register.cc
View file

@ -173,7 +173,7 @@ void Pass::call(RTLIL::Design *design, std::string command)
}
while (!tok.empty()) {
if (tok == "#") {
if (tok[0] == '#') {
int stop;
for (stop = 0; stop < GetSize(cmd_buf); stop++)
if (cmd_buf[stop] == '\r' || cmd_buf[stop] == '\n')

2
kernel/yosys.cc
View file

@ -903,6 +903,8 @@ void run_backend(std::string filename, std::string command, RTLIL::Design *desig
command = "verilog";
else if (filename.size() > 3 && filename.substr(filename.size()-3) == ".il")
command = "ilang";
else if (filename.size() > 4 && filename.substr(filename.size()-4) == ".aig")
command = "aiger";
else if (filename.size() > 5 && filename.substr(filename.size()-5) == ".blif")
command = "blif";
else if (filename.size() > 5 && filename.substr(filename.size()-5) == ".edif")

1
techlibs/greenpak4/Makefile.inc
View file

@ -3,6 +3,7 @@ OBJS += techlibs/greenpak4/synth_greenpak4.o
OBJS += techlibs/greenpak4/greenpak4_counters.o
OBJS += techlibs/greenpak4/greenpak4_dffinv.o
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_latch.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_map.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_sim.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/gp_dff.lib))

15
techlibs/greenpak4/cells_latch.v Normal file
View file

@ -0,0 +1,15 @@
module $_DLATCH_P_(input E, input D, output Q);
GP_DLATCH _TECHMAP_REPLACE_ (
.D(D),
.nCLK(!E),
.Q(Q)
);
endmodule
module $_DLATCH_N_(input E, input D, output Q);
GP_DLATCH _TECHMAP_REPLACE_ (
.D(D),
.nCLK(E),
.Q(Q)
);
endmodule

52
techlibs/greenpak4/cells_map.v
View file

@ -50,6 +50,58 @@ module GP_DFFRI(input D, CLK, nRST, output reg nQ);
);
endmodule
module GP_DLATCHS(input D, nCLK, nSET, output reg Q);
parameter [0:0] INIT = 1'bx;
GP_DLATCHSR #(
.INIT(INIT),
.SRMODE(1'b1),
) _TECHMAP_REPLACE_ (
.D(D),
.nCLK(nCLK),
.nSR(nSET),
.Q(Q)
);
endmodule
module GP_DLATCHR(input D, nCLK, nRST, output reg Q);
parameter [0:0] INIT = 1'bx;
GP_DLATCHSR #(
.INIT(INIT),
.SRMODE(1'b0),
) _TECHMAP_REPLACE_ (
.D(D),
.nCLK(nCLK),
.nSR(nRST),
.Q(Q)
);
endmodule
module GP_DLATCHSI(input D, nCLK, nSET, output reg nQ);
parameter [0:0] INIT = 1'bx;
GP_DLATCHSRI #(
.INIT(INIT),
.SRMODE(1'b1),
) _TECHMAP_REPLACE_ (
.D(D),
.nCLK(nCLK),
.nSR(nSET),
.nQ(nQ)
);
endmodule
module GP_DLATCHRI(input D, nCLK, nRST, output reg nQ);
parameter [0:0] INIT = 1'bx;
GP_DLATCHSRI #(
.INIT(INIT),
.SRMODE(1'b0),
) _TECHMAP_REPLACE_ (
.D(D),
.nCLK(nCLK),
.nSR(nRST),
.nQ(nQ)
);
endmodule
module GP_OBUFT(input IN, input OE, output OUT);
GP_IOBUF _TECHMAP_REPLACE_ (
.IN(IN),

301
techlibs/greenpak4/cells_sim.v
View file

@ -16,11 +16,15 @@ module GP_4LUT(input IN0, IN1, IN2, IN3, output OUT);
endmodule
module GP_ABUF(input wire IN, output wire OUT);
assign OUT = IN;
//must be 1, 5, 20, 50
//values >1 only available with Vdd > 2.7V
parameter BANDWIDTH_KHZ = 1;
//cannot simulate mixed signal IP
endmodule
module GP_ACMP(input wire PWREN, input wire VIN, input wire VREF, output reg OUT);
@ -29,9 +33,9 @@ module GP_ACMP(input wire PWREN, input wire VIN, input wire VREF, output reg OUT
parameter VIN_ATTEN = 1;
parameter VIN_ISRC_EN = 0;
parameter HYSTERESIS = 0;
initial OUT = 0;
//cannot simulate mixed signal IP
endmodule
@ -40,37 +44,41 @@ module GP_BANDGAP(output reg OK);
parameter AUTO_PWRDN = 1;
parameter CHOPPER_EN = 1;
parameter OUT_DELAY = 100;
//cannot simulate mixed signal IP
endmodule
module GP_CLKBUF(input wire IN, output wire OUT);
assign OUT = IN;
endmodule
module GP_COUNT8(input CLK, input wire RST, output reg OUT);
parameter RESET_MODE = "RISING";
parameter RESET_MODE = "RISING";
parameter COUNT_TO = 8'h1;
parameter CLKIN_DIVIDE = 1;
//more complex hard IP blocks are not supported for simulation yet
reg[7:0] count = COUNT_TO;
//Combinatorially output whenever we wrap low
always @(*) begin
OUT <= (count == 8'h0);
end
//POR or SYSRST reset value is COUNT_TO. Datasheet is unclear but conversations w/ Silego confirm.
//Runtime reset value is clearly 0 except in count/FSM cells where it's configurable but we leave at 0 for now.
//Datasheet seems to indicate that reset is asynchronous, but for now we model as sync due to Yosys issues...
always @(posedge CLK) begin
count <= count - 1'd1;
if(count == 0)
count <= COUNT_TO;
/*
if((RESET_MODE == "RISING") && RST)
count <= 0;
@ -78,18 +86,18 @@ module GP_COUNT8(input CLK, input wire RST, output reg OUT);
count <= 0;
if((RESET_MODE == "BOTH") && RST)
count <= 0;
*/
*/
end
endmodule
module GP_COUNT14(input CLK, input wire RST, output reg OUT);
parameter RESET_MODE = "RISING";
parameter RESET_MODE = "RISING";
parameter COUNT_TO = 14'h1;
parameter CLKIN_DIVIDE = 1;
//more complex hard IP blocks are not supported for simulation yet
endmodule
@ -128,15 +136,70 @@ module GP_DAC(input[7:0] DIN, input wire VREF, output reg VOUT);
endmodule
module GP_DCMP(input[7:0] INP, input[7:0] INN, input CLK, input PWRDN, output reg GREATER, output reg EQUAL);
parameter PWRDN_SYNC = 1'b0;
parameter CLK_EDGE = "RISING";
parameter GREATER_OR_EQUAL = 1'b0;
//TODO implement power-down mode
initial GREATER = 0;
initial EQUAL = 0;
wire clk_minv = (CLK_EDGE == "RISING") ? CLK : ~CLK;
always @(posedge clk_minv) begin
if(GREATER_OR_EQUAL)
GREATER <= (INP >= INN);
else
GREATER <= (INP > INN);
EQUAL <= (INP == INN);
end
endmodule
module GP_DCMPREF(output reg[7:0]OUT);
parameter[7:0] REF_VAL = 8'h00;
initial OUT = REF_VAL;
endmodule
module GP_DCMPMUX(input[1:0] SEL, input[7:0] IN0, input[7:0] IN1, input[7:0] IN2, input[7:0] IN3, output reg[7:0] OUTA, output reg[7:0] OUTB);
always @(*) begin
case(SEL)
2'd00: begin
OUTA <= IN0;
OUTB <= IN3;
end
2'd01: begin
OUTA <= IN1;
OUTB <= IN2;
end
2'd02: begin
OUTA <= IN2;
OUTB <= IN1;
end
2'd03: begin
OUTA <= IN3;
OUTB <= IN0;
end
endcase
end
endmodule
module GP_DELAY(input IN, output reg OUT);
parameter DELAY_STEPS = 1;
parameter GLITCH_FILTER = 0;
initial OUT = 0;
generate
//TODO: These delays are PTV dependent! For now, hard code 3v3 timing
//Change simulation-mode delay depending on global Vdd range (how to specify this?)
always @(*) begin
@ -151,9 +214,9 @@ module GP_DELAY(input IN, output reg OUT);
end
endcase
end
endgenerate
endmodule
module GP_DFF(input D, CLK, output reg Q);
@ -240,14 +303,100 @@ module GP_DFFSRI(input D, CLK, nSR, output reg nQ);
end
endmodule
module GP_DLATCH(input D, input nCLK, output reg Q);
parameter [0:0] INIT = 1'bx;
initial Q = INIT;
always @(*) begin
if(!nCLK)
Q <= D;
end
endmodule
module GP_DLATCHI(input D, input nCLK, output reg nQ);
parameter [0:0] INIT = 1'bx;
initial nQ = INIT;
always @(*) begin
if(!nCLK)
nQ <= ~D;
end
endmodule
module GP_DLATCHR(input D, input nCLK, input nRST, output reg Q);
parameter [0:0] INIT = 1'bx;
initial Q = INIT;
always @(*) begin
if(!nRST)
Q <= 1'b0;
else if(!nCLK)
Q <= D;
end
endmodule
module GP_DLATCHRI(input D, input nCLK, input nRST, output reg nQ);
parameter [0:0] INIT = 1'bx;
initial nQ = INIT;
always @(*) begin
if(!nRST)
nQ <= 1'b1;
else if(!nCLK)
nQ <= ~D;
end
endmodule
module GP_DLATCHS(input D, input nCLK, input nSET, output reg Q);
parameter [0:0] INIT = 1'bx;
initial Q = INIT;
always @(*) begin
if(!nSET)
Q <= 1'b1;
else if(!nCLK)
Q <= D;
end
endmodule
module GP_DLATCHSI(input D, input nCLK, input nSET, output reg nQ);
parameter [0:0] INIT = 1'bx;
initial nQ = INIT;
always @(*) begin
if(!nSET)
nQ <= 1'b0;
else if(!nCLK)
nQ <= ~D;
end
endmodule
module GP_DLATCHSR(input D, input nCLK, input nSR, output reg Q);
parameter [0:0] INIT = 1'bx;
parameter[0:0] SRMODE = 1'bx;
initial Q = INIT;
always @(*) begin
if(!nSR)
Q <= SRMODE;
else if(!nCLK)
Q <= D;
end
endmodule
module GP_DLATCHSRI(input D, input nCLK, input nSR, output reg nQ);
parameter [0:0] INIT = 1'bx;
parameter[0:0] SRMODE = 1'bx;
initial nQ = INIT;
always @(*) begin
if(!nSR)
nQ <= ~SRMODE;
else if(!nCLK)
nQ <= ~D;
end
endmodule
module GP_EDGEDET(input IN, output reg OUT);
parameter EDGE_DIRECTION = "RISING";
parameter DELAY_STEPS = 1;
parameter GLITCH_FILTER = 0;
//not implemented for simulation
endmodule
module GP_IBUF(input IN, output OUT);
@ -264,16 +413,16 @@ module GP_INV(input IN, output OUT);
endmodule
module GP_LFOSC(input PWRDN, output reg CLKOUT);
parameter PWRDN_EN = 0;
parameter AUTO_PWRDN = 0;
parameter OUT_DIV = 1;
initial CLKOUT = 0;
//auto powerdown not implemented for simulation
//output dividers not implemented for simulation
always begin
if(PWRDN)
CLKOUT = 0;
@ -283,7 +432,7 @@ module GP_LFOSC(input PWRDN, output reg CLKOUT);
CLKOUT = ~CLKOUT;
end
end
endmodule
module GP_OBUF(input IN, output OUT);
@ -320,18 +469,22 @@ module GP_PGEN(input wire nRST, input wire CLK, output reg OUT);
OUT <= PATTERN_DATA[count];
if( (count + 1) == PATTERN_LEN)
count <= 0;
count <= 0;
end
end
endmodule
module GP_PWRDET(output reg VDD_LOW);
initial VDD_LOW = 0;
endmodule
module GP_POR(output reg RST_DONE);
parameter POR_TIME = 500;
initial begin
RST_DONE = 0;
if(POR_TIME == 4)
#4000;
else if(POR_TIME == 500)
@ -340,64 +493,64 @@ module GP_POR(output reg RST_DONE);
$display("ERROR: bad POR_TIME for GP_POR cell");
$finish;
end
RST_DONE = 1;
end
endmodule
module GP_RCOSC(input PWRDN, output reg CLKOUT_HARDIP, output reg CLKOUT_FABRIC);
parameter PWRDN_EN = 0;
parameter AUTO_PWRDN = 0;
parameter HARDIP_DIV = 1;
parameter FABRIC_DIV = 1;
parameter OSC_FREQ = "25k";
initial CLKOUT_HARDIP = 0;
initial CLKOUT_FABRIC = 0;
//output dividers not implemented for simulation
//auto powerdown not implemented for simulation
always begin
if(PWRDN) begin
CLKOUT_HARDIP = 0;
CLKOUT_FABRIC = 0;
end
else begin
if(OSC_FREQ == "25k") begin
//half period of 25 kHz
#20000;
end
else begin
//half period of 2 MHz
#250;
end
CLKOUT_HARDIP = ~CLKOUT_HARDIP;
CLKOUT_FABRIC = ~CLKOUT_FABRIC;
end
end
endmodule
module GP_RINGOSC(input PWRDN, output reg CLKOUT_HARDIP, output reg CLKOUT_FABRIC);
parameter PWRDN_EN = 0;
parameter AUTO_PWRDN = 0;
parameter HARDIP_DIV = 1;
parameter FABRIC_DIV = 1;
initial CLKOUT_HARDIP = 0;
initial CLKOUT_FABRIC = 0;
//output dividers not implemented for simulation
//auto powerdown not implemented for simulation
always begin
if(PWRDN) begin
CLKOUT_HARDIP = 0;
@ -410,7 +563,7 @@ module GP_RINGOSC(input PWRDN, output reg CLKOUT_HARDIP, output reg CLKOUT_FABRI
CLKOUT_FABRIC = ~CLKOUT_FABRIC;
end
end
endmodule
module GP_SHREG(input nRST, input CLK, input IN, output OUTA, output OUTB);
@ -418,32 +571,58 @@ module GP_SHREG(input nRST, input CLK, input IN, output OUTA, output OUTB);
parameter OUTA_TAP = 1;
parameter OUTA_INVERT = 0;
parameter OUTB_TAP = 1;
reg[15:0] shreg = 0;
always @(posedge CLK, negedge nRST) begin
if(!nRST)
shreg = 0;
else
shreg <= {shreg[14:0], IN};
end
assign OUTA = (OUTA_INVERT) ? ~shreg[OUTA_TAP - 1] : shreg[OUTA_TAP - 1];
assign OUTB = shreg[OUTB_TAP - 1];
endmodule
module GP_SPI(
input SCK,
inout SDAT,
input CSN,
input[7:0] TXD_HIGH,
input[7:0] TXD_LOW,
output reg[7:0] RXD_HIGH,
output reg[7:0] RXD_LOW,
output reg INT);
initial DOUT_HIGH = 0;
initial DOUT_LOW = 0;
initial INT = 0;
parameter DATA_WIDTH = 8; //byte or word width
parameter SPI_CPHA = 0; //SPI clock phase
parameter SPI_CPOL = 0; //SPI clock polarity
parameter DIRECTION = "INPUT"; //SPI data direction (either input to chip or output to host)
//parallel output to fabric not yet implemented
//TODO: write sim model
//TODO: SPI SDIO control... can we use ADC output while SPI is input??
//TODO: clock sync
endmodule
//keep constraint needed to prevent optimization since we have no outputs
(* keep *)
module GP_SYSRESET(input RST);
parameter RESET_MODE = "EDGE";
parameter EDGE_SPEED = 4;
//cannot simulate whole system reset
endmodule
module GP_VDD(output OUT);

21
techlibs/greenpak4/greenpak4_dffinv.cc
View file

@ -26,6 +26,7 @@ PRIVATE_NAMESPACE_BEGIN
void invert_gp_dff(Cell *cell, bool invert_input)
{
string cell_type = cell->type.str();
bool cell_type_latch = cell_type.find("LATCH") != string::npos;
bool cell_type_i = cell_type.find('I') != string::npos;
bool cell_type_r = cell_type.find('R') != string::npos;
bool cell_type_s = cell_type.find('S') != string::npos;
@ -79,25 +80,28 @@ void invert_gp_dff(Cell *cell, bool invert_input)
cell_type_i = true;
}
cell->type = stringf("\\GP_DFF%s%s%s", cell_type_s ? "S" : "", cell_type_r ? "R" : "", cell_type_i ? "I" : "");
if(cell_type_latch)
cell->type = stringf("\\GP_DLATCH%s%s%s", cell_type_s ? "S" : "", cell_type_r ? "R" : "", cell_type_i ? "I" : "");
else
cell->type = stringf("\\GP_DFF%s%s%s", cell_type_s ? "S" : "", cell_type_r ? "R" : "", cell_type_i ? "I" : "");
log("Merged %s inverter into cell %s.%s: %s -> %s\n", invert_input ? "input" : "output",
log_id(cell->module), log_id(cell), cell_type.c_str()+1, log_id(cell->type));
}
struct Greenpak4DffInvPass : public Pass {
Greenpak4DffInvPass() : Pass("greenpak4_dffinv", "merge greenpak4 inverters and DFFs") { }
Greenpak4DffInvPass() : Pass("greenpak4_dffinv", "merge greenpak4 inverters and DFF/latches") { }
virtual void help()
{
log("\n");
log(" greenpak4_dffinv [options] [selection]\n");
log("\n");
log("Merge GP_INV cells with GP_DFF* cells.\n");
log("Merge GP_INV cells with GP_DFF* and GP_DLATCH* cells.\n");
log("\n");
}
virtual void execute(std::vector<std::string> args, RTLIL::Design *design)
{
log_header(design, "Executing GREENPAK4_DFFINV pass (merge synchronous set/reset into FF cells).\n");
log_header(design, "Executing GREENPAK4_DFFINV pass (merge input/output inverters into FF/latch cells).\n");
size_t argidx;
for (argidx = 1; argidx < args.size(); argidx++)
@ -120,6 +124,15 @@ struct Greenpak4DffInvPass : public Pass {
gp_dff_types.insert("\\GP_DFFSR");
gp_dff_types.insert("\\GP_DFFSRI");
gp_dff_types.insert("\\GP_DLATCH");
gp_dff_types.insert("\\GP_DLATCHI");
gp_dff_types.insert("\\GP_DLATCHR");
gp_dff_types.insert("\\GP_DLATCHRI");
gp_dff_types.insert("\\GP_DLATCHS");
gp_dff_types.insert("\\GP_DLATCHSI");
gp_dff_types.insert("\\GP_DLATCHSR");
gp_dff_types.insert("\\GP_DLATCHSRI");
for (auto module : design->selected_modules())
{
SigMap sigmap(module);

3
techlibs/greenpak4/synth_greenpak4.cc
View file

@ -36,6 +36,8 @@ struct SynthGreenPAK4Pass : public ScriptPass
log(" synth_greenpak4 [options]\n");
log("\n");
log("This command runs synthesis for GreenPAK4 FPGAs. This work is experimental.\n");
log("It is intended to be used with https://github.com/azonenberg/openfpga as the\n");
log("place-and-route.\n");
log("\n");
log(" -top <module>\n");
log(" use the specified module as top module (default='top')\n");
@ -159,6 +161,7 @@ struct SynthGreenPAK4Pass : public ScriptPass
run("memory_map");
run("opt -undriven -fine");
run("techmap");
run("techmap -map +/greenpak4/cells_latch.v");
run("dfflibmap -prepare -liberty +/greenpak4/gp_dff.lib");
run("opt -fast");
if (retime || help_mode)

35
tests/unit/Makefile Normal file
View file

@ -0,0 +1,35 @@
GTESTFLAG := -lgtest -lgtest_main
RPATH := -Wl,-rpath
EXTRAFLAGS := -lyosys -pthreads
OBJTEST := objtest
BINTEST := bintest
ALLTESTFILE := $(shell find -name '*Test.cc' -printf '%P ')
TESTDIRS := $(sort $(dir $(ALLTESTFILE)))
TESTS := $(addprefix $(BINTEST)/, $(basename $(ALLTESTFILE:%Test.cc=%Test.o)))
# Prevent make from removing our .o files
.SECONDARY:
all: prepare $(TESTS) run-tests
$(BINTEST)/%: $(OBJTEST)/%.o
$(CXX) -L$(ROOTPATH) $(RPATH)=$(ROOTPATH) -o $@ $^ $(LDLIBS) \
$(GTESTFLAG) $(EXTRAFLAGS)
$(OBJTEST)/%.o: $(basename $(subst $(OBJTEST),.,%)).cc
$(CXX) -o $@ -c -I$(ROOTPATH) $(CPPFLAGS) $(CXXFLAGS) $^
.PHONY: prepare run-tests clean
run-tests: $(TESTS)
$(subst Test ,Test; ,$^)
prepare:
mkdir -p $(addprefix $(BINTEST)/,$(TESTDIRS))
mkdir -p $(addprefix $(OBJTEST)/,$(TESTDIRS))
clean:
rm -rf $(OBJTEST)
rm -rf $(BINTEST)

14
tests/unit/kernel/logTest.cc Normal file
View file

@ -0,0 +1,14 @@
#include <gtest/gtest.h>
#include "kernel/yosys.h"
#include "kernel/log.h"
YOSYS_NAMESPACE_BEGIN
TEST(KernelLogTest, logvValidValues)
{
//TODO: Implement log test
EXPECT_EQ(7, 7);
}
YOSYS_NAMESPACE_END

14
tests/unit/kernel/rtlilTest.cc Normal file
View file

@ -0,0 +1,14 @@
#include <gtest/gtest.h>
#include "kernel/yosys.h"
#include "kernel/rtlil.h"
YOSYS_NAMESPACE_BEGIN
TEST(KernelRtlilTest, getReferenceValid)
{
//TODO: Implement rtlil test
EXPECT_EQ(33, 33);
}
YOSYS_NAMESPACE_END