embeddedsw/XilinxProcessorIPLib/drivers/axidma/examples/xaxidma_example_sg_poll.c

/******************************************************************************
*
* (c) Copyright 2010-2013 Xilinx, Inc. All rights reserved.
*
* This file contains confidential and proprietary information of Xilinx, Inc.
* and is protected under U.S. and international copyright and other
* intellectual property laws.
*
* DISCLAIMER
* This disclaimer is not a license and does not grant any rights to the
* materials distributed herewith. Except as otherwise provided in a valid
* license issued to you by Xilinx, and to the maximum extent permitted by
* applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL
* FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS,
* IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
* MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE;
* and (2) Xilinx shall not be liable (whether in contract or tort, including
* negligence, or under any other theory of liability) for any loss or damage
* of any kind or nature related to, arising under or in connection with these
* materials, including for any direct, or any indirect, special, incidental,
* or consequential loss or damage (including loss of data, profits, goodwill,
* or any type of loss or damage suffered as a result of any action brought by
* a third party) even if such damage or loss was reasonably foreseeable or
* Xilinx had been advised of the possibility of the same.
*
* CRITICAL APPLICATIONS
* Xilinx products are not designed or intended to be fail-safe, or for use in
* any application requiring fail-safe performance, such as life-support or
* safety devices or systems, Class III medical devices, nuclear facilities,
* applications related to the deployment of airbags, or any other applications
* that could lead to death, personal injury, or severe property or
* environmental damage (individually and collectively, "Critical
* Applications"). Customer assumes the sole risk and liability of any use of
* Xilinx products in Critical Applications, subject only to applicable laws
* and regulations governing limitations on product liability.
*
* THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE
* AT ALL TIMES.
*
******************************************************************************/
/*****************************************************************************/
/**
 *
 * @file xaxidma_example_sg_poll.c
 *
 * This file demonstrates how to use the xaxidma driver on the Xilinx AXI
 * DMA core (AXIDMA) to transfer packets in polling mode when the AXIDMA
 * core is configured in Scatter Gather Mode.
 *
 * This code assumes a loopback hardware widget is connected to the AXI DMA
 * core for data packet loopback.
 *
 * To see the debug print, you need a Uart16550 or uartlite in your system,
 * and please set "-DDEBUG" in your compiler options. You need to rebuild your
 * software executable.
 *
 * Make sure that MEMORY_BASE is defined properly as per the HW system. The
 * h/w system built in Area mode has a maximum DDR memory limit of 64MB. In 
 * throughput mode, it is 512MB.  These limits are need to ensured for 
 * proper operation of this code. 
 * 
 *
 * <pre>
 * MODIFICATION HISTORY:
 *
 * Ver   Who  Date     Changes
 * ----- ---- -------- -------------------------------------------------------
 * 1.00a jz   05/17/10 First release
 * 2.00a jz   08/10/10 Second release, added in xaxidma_g.c, xaxidma_sinit.c,
 *                     updated tcl file, added xaxidma_porting_guide.h, removed
 *                     workaround for endianness
 * 4.00a rkv  02/22/11 Name of the file has been changed for naming consistency
 *       	       	   Added interrupt support for ARM.
 * 5.00a srt  03/05/12 Added Flushing and Invalidation of Caches to fix CRs
 *		       		   648103, 648701.
 *		       		   Added V7 DDR Base Address to fix CR 649405.
 * 6.00a srt  03/27/12 Changed API calls to support MCDMA driver.
 * 7.00a srt  06/18/12 API calls are reverted back for backward compatibility.
 * 7.01a srt  11/02/12 Buffer sizes (Tx and Rx) are modified to meet maximum 
 *		       DDR memory limit of the h/w system built with Area mode
 * 7.02a srt  03/01/13 Updated DDR base address for IPI designs (CR 703656). 
 *
 * </pre>
 *
 * ***************************************************************************
 */
/***************************** Include Files *********************************/
#include "xaxidma.h"
#include "xparameters.h"
#include "xdebug.h"

#if defined(XPAR_UARTNS550_0_BASEADDR)
#include "xuartns550_l.h"       /* to use uartns550 */
#endif

#if (!defined(DEBUG))
extern void xil_printf(const char *format, ...);
#endif

/******************** Constant Definitions **********************************/

/*
 * Device hardware build related constants.
 */

#define DMA_DEV_ID		XPAR_AXIDMA_0_DEVICE_ID

#ifdef XPAR_V6DDR_0_S_AXI_BASEADDR
#define DDR_BASE_ADDR		XPAR_V6DDR_0_S_AXI_BASEADDR
#elif XPAR_S6DDR_0_S0_AXI_BASEADDR
#define DDR_BASE_ADDR		XPAR_S6DDR_0_S0_AXI_BASEADDR
#elif XPAR_AXI_7SDDR_0_S_AXI_BASEADDR
#define DDR_BASE_ADDR		XPAR_AXI_7SDDR_0_S_AXI_BASEADDR
#elif XPAR_MIG7SERIES_0_BASEADDR
#define DDR_BASE_ADDR		XPAR_MIG7SERIES_0_BASEADDR
#endif

#ifndef DDR_BASE_ADDR
#warning CHECK FOR THE VALID DDR ADDRESS IN XPARAMETERS.H, \
			DEFAULT SET TO 0x01000000
#define MEM_BASE_ADDR		0x01000000
#else
#define MEM_BASE_ADDR		(DDR_BASE_ADDR + 0x1000000)
#endif

#define TX_BD_SPACE_BASE	(MEM_BASE_ADDR)
#define TX_BD_SPACE_HIGH	(MEM_BASE_ADDR + 0x00000FFF)
#define RX_BD_SPACE_BASE	(MEM_BASE_ADDR + 0x00001000)
#define RX_BD_SPACE_HIGH	(MEM_BASE_ADDR + 0x00001FFF)
#define TX_BUFFER_BASE		(MEM_BASE_ADDR + 0x00100000)
#define RX_BUFFER_BASE		(MEM_BASE_ADDR + 0x00300000)
#define RX_BUFFER_HIGH		(MEM_BASE_ADDR + 0x004FFFFF)


#define MAX_PKT_LEN		0x20

#define TEST_START_VALUE	0xC

/**************************** Type Definitions *******************************/


/***************** Macros (Inline Functions) Definitions *********************/


/************************** Function Prototypes ******************************/
#if defined(XPAR_UARTNS550_0_BASEADDR)
static void Uart550_Setup(void);
#endif

static int RxSetup(XAxiDma * AxiDmaInstPtr);
static int TxSetup(XAxiDma * AxiDmaInstPtr);
static int SendPacket(XAxiDma * AxiDmaInstPtr);
static int CheckData(void);
static int CheckDmaResult(XAxiDma * AxiDmaInstPtr);

/************************** Variable Definitions *****************************/
/*
 * Device instance definitions
 */
XAxiDma AxiDma;

/*
 * Buffer for transmit packet. Must be 32-bit aligned to be used by DMA.
 */
u32 *Packet = (u32 *) TX_BUFFER_BASE;

/*****************************************************************************/
/**
*
* Main function
*
* This function is the main entry of the tests on DMA core. It sets up
* DMA engine to be ready to receive and send packets, then a packet is
* transmitted and will be verified after it is received via the DMA loopback
* widget.
*
* @param	None
*
* @return
*		- XST_SUCCESS if test passes
*		- XST_FAILURE if test fails.
*
* @note		None.
*
******************************************************************************/
int main(void)
{
	int Status;
	XAxiDma_Config *Config;

#if defined(XPAR_UARTNS550_0_BASEADDR)

	Uart550_Setup();

#endif

	xil_printf("\r\n--- Entering main() --- \r\n");

	Config = XAxiDma_LookupConfig(DMA_DEV_ID);
	if (!Config) {
		xil_printf("No config found for %d\r\n", DMA_DEV_ID);

		return XST_FAILURE;
	}

	/* Initialize DMA engine */
	Status = XAxiDma_CfgInitialize(&AxiDma, Config);
	if (Status != XST_SUCCESS) {
		xil_printf("Initialization failed %d\r\n", Status);
		return XST_FAILURE;
	}

	if(!XAxiDma_HasSg(&AxiDma)) {
		xil_printf("Device configured as Simple mode \r\n");

		return XST_FAILURE;
	}

	Status = TxSetup(&AxiDma);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	Status = RxSetup(&AxiDma);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	/* Send a packet */
	Status = SendPacket(&AxiDma);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	/* Check DMA transfer result */
	Status = CheckDmaResult(&AxiDma);

	xil_printf("AXI DMA SG Polling Test %s\r\n",
		(Status == XST_SUCCESS)? "passed":"failed");

	xil_printf("--- Exiting main() --- \r\n");

	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	return XST_SUCCESS;
}

#if defined(XPAR_UARTNS550_0_BASEADDR)
/*****************************************************************************/
/*
*
* Uart16550 setup routine, need to set baudrate to 9600, and data bits to 8
*
* @param	None
*
* @return	None
*
* @note		None.
*
******************************************************************************/
static void Uart550_Setup(void)
{

	/* Set the baudrate to be predictable
	 */
	XUartNs550_SetBaud(XPAR_UARTNS550_0_BASEADDR,
			XPAR_XUARTNS550_CLOCK_HZ, 9600);

	XUartNs550_SetLineControlReg(XPAR_UARTNS550_0_BASEADDR,
			XUN_LCR_8_DATA_BITS);

}
#endif

/*****************************************************************************/
/**
*
* This function sets up RX channel of the DMA engine to be ready for packet
* reception
*
* @param	AxiDmaInstPtr is the pointer to the instance of the DMA engine.
*
* @return	XST_SUCCESS if the setup is successful, XST_FAILURE otherwise.
*
* @note		None.
*
******************************************************************************/
static int RxSetup(XAxiDma * AxiDmaInstPtr)
{
	XAxiDma_BdRing *RxRingPtr;
	int Delay = 0;
	int Coalesce = 1;
	int Status;
	XAxiDma_Bd BdTemplate;
	XAxiDma_Bd *BdPtr;
	XAxiDma_Bd *BdCurPtr;
	u32 BdCount;
	u32 FreeBdCount;
	u32 RxBufferPtr;
	int Index;

	RxRingPtr = XAxiDma_GetRxRing(&AxiDma);

	/* Disable all RX interrupts before RxBD space setup */

	XAxiDma_BdRingIntDisable(RxRingPtr, XAXIDMA_IRQ_ALL_MASK);

	/* Set delay and coalescing */
	XAxiDma_BdRingSetCoalesce(RxRingPtr, Coalesce, Delay);

	/* Setup Rx BD space */
	BdCount = XAxiDma_BdRingCntCalc(XAXIDMA_BD_MINIMUM_ALIGNMENT,
				RX_BD_SPACE_HIGH - RX_BD_SPACE_BASE + 1);

	Status = XAxiDma_BdRingCreate(RxRingPtr, RX_BD_SPACE_BASE,
				RX_BD_SPACE_BASE,
				XAXIDMA_BD_MINIMUM_ALIGNMENT, BdCount);

	if (Status != XST_SUCCESS) {
		xil_printf("RX create BD ring failed %d\r\n", Status);

		return XST_FAILURE;
	}

	/*
	 * Setup an all-zero BD as the template for the Rx channel.
	 */
	XAxiDma_BdClear(&BdTemplate);

	Status = XAxiDma_BdRingClone(RxRingPtr, &BdTemplate);
	if (Status != XST_SUCCESS) {
		xil_printf("RX clone BD failed %d\r\n", Status);

		return XST_FAILURE;
	}

	/* Attach buffers to RxBD ring so we are ready to receive packets */

	FreeBdCount = XAxiDma_BdRingGetFreeCnt(RxRingPtr);

	Status = XAxiDma_BdRingAlloc(RxRingPtr, FreeBdCount, &BdPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("RX alloc BD failed %d\r\n", Status);

		return XST_FAILURE;
	}

	BdCurPtr = BdPtr;
	RxBufferPtr = RX_BUFFER_BASE;
	for (Index = 0; Index < FreeBdCount; Index++) {
		Status = XAxiDma_BdSetBufAddr(BdCurPtr, RxBufferPtr);

		if (Status != XST_SUCCESS) {
			xil_printf("Set buffer addr %x on BD %x failed %d\r\n",
			    (unsigned int)RxBufferPtr,
			    (unsigned int)BdCurPtr, Status);

			return XST_FAILURE;
		}

		Status = XAxiDma_BdSetLength(BdCurPtr, MAX_PKT_LEN,
				RxRingPtr->MaxTransferLen);
		if (Status != XST_SUCCESS) {
			xil_printf("Rx set length %d on BD %x failed %d\r\n",
			    MAX_PKT_LEN, (unsigned int)BdCurPtr, Status);

			return XST_FAILURE;
		}

		/* Receive BDs do not need to set anything for the control
		 * The hardware will set the SOF/EOF bits per stream status
		 */
		XAxiDma_BdSetCtrl(BdCurPtr, 0);
		XAxiDma_BdSetId(BdCurPtr, RxBufferPtr);

		RxBufferPtr += MAX_PKT_LEN;
		BdCurPtr = XAxiDma_BdRingNext(RxRingPtr, BdCurPtr);
	}

	/* Clear the receive buffer, so we can verify data
	 */
	memset((void *)RX_BUFFER_BASE, 0, MAX_PKT_LEN);

	Status = XAxiDma_BdRingToHw(RxRingPtr, FreeBdCount,
						BdPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("RX submit hw failed %d\r\n", Status);

		return XST_FAILURE;
	}

	/* Start RX DMA channel */
	Status = XAxiDma_BdRingStart(RxRingPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("RX start hw failed %d\r\n", Status);

		return XST_FAILURE;
	}

	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* This function sets up the TX channel of a DMA engine to be ready for packet
* transmission
*
* @param	AxiDmaInstPtr is the instance pointer to the DMA engine.
*
* @return	XST_SUCCESS if the setup is successful, XST_FAILURE otherwise.
*
* @note		None.
*
******************************************************************************/
static int TxSetup(XAxiDma * AxiDmaInstPtr)
{
	XAxiDma_BdRing *TxRingPtr;
	XAxiDma_Bd BdTemplate;
	int Delay = 0;
	int Coalesce = 1;
	int Status;
	u32 BdCount;

	TxRingPtr = XAxiDma_GetTxRing(&AxiDma);

	/* Disable all TX interrupts before TxBD space setup */

	XAxiDma_BdRingIntDisable(TxRingPtr, XAXIDMA_IRQ_ALL_MASK);

	/* Set TX delay and coalesce */
	XAxiDma_BdRingSetCoalesce(TxRingPtr, Coalesce, Delay);

	/* Setup TxBD space  */
	BdCount = XAxiDma_BdRingCntCalc(XAXIDMA_BD_MINIMUM_ALIGNMENT,
				TX_BD_SPACE_HIGH - TX_BD_SPACE_BASE + 1);

	Status = XAxiDma_BdRingCreate(TxRingPtr, TX_BD_SPACE_BASE,
				TX_BD_SPACE_BASE,
				XAXIDMA_BD_MINIMUM_ALIGNMENT, BdCount);
	if (Status != XST_SUCCESS) {
		xil_printf("failed create BD ring in txsetup\r\n");

		return XST_FAILURE;
	}

	/*
	 * We create an all-zero BD as the template.
	 */
	XAxiDma_BdClear(&BdTemplate);

	Status = XAxiDma_BdRingClone(TxRingPtr, &BdTemplate);
	if (Status != XST_SUCCESS) {
		xil_printf("failed bdring clone in txsetup %d\r\n", Status);

		return XST_FAILURE;
	}

	/* Start the TX channel */
	Status = XAxiDma_BdRingStart(TxRingPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("failed start bdring txsetup %d\r\n", Status);

		return XST_FAILURE;
	}

	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* This function transmits one packet non-blockingly through the DMA engine.
*
* @param	AxiDmaInstPtr points to the DMA engine instance
*
* @return	- XST_SUCCESS if the DMA accepts the packet successfully,
*		- XST_FAILURE otherwise.
*
* @note     None.
*
******************************************************************************/
static int SendPacket(XAxiDma * AxiDmaInstPtr)
{
	XAxiDma_BdRing *TxRingPtr;
	u8 *TxPacket;
	u8 Value;
	XAxiDma_Bd *BdPtr;
	int Status;
	int Index;

	TxRingPtr = XAxiDma_GetTxRing(AxiDmaInstPtr);

	/* Create pattern in the packet to transmit */
	TxPacket = (u8 *) Packet;

	Value = TEST_START_VALUE;

	for(Index = 0; Index < MAX_PKT_LEN; Index ++) {
		TxPacket[Index] = Value;

		Value = (Value + 1) & 0xFF;
	}

	/* Flush the SrcBuffer before the DMA transfer, in case the Data Cache
	 * is enabled
	 */
	Xil_DCacheFlushRange((u32)TxPacket, MAX_PKT_LEN);


	/* Allocate a BD */
	Status = XAxiDma_BdRingAlloc(TxRingPtr, 1, &BdPtr);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	/* Set up the BD using the information of the packet to transmit */
	Status = XAxiDma_BdSetBufAddr(BdPtr, (u32) Packet);
	if (Status != XST_SUCCESS) {
		xil_printf("Tx set buffer addr %x on BD %x failed %d\r\n",
		    (unsigned int)Packet, (unsigned int)BdPtr, Status);

		return XST_FAILURE;
	}

	Status = XAxiDma_BdSetLength(BdPtr, MAX_PKT_LEN,
				TxRingPtr->MaxTransferLen);
	if (Status != XST_SUCCESS) {
		xil_printf("Tx set length %d on BD %x failed %d\r\n",
		    MAX_PKT_LEN, (unsigned int)BdPtr, Status);

		return XST_FAILURE;
	}

#if (XPAR_AXIDMA_0_SG_INCLUDE_STSCNTRL_STRM == 1)
	Status = XAxiDma_BdSetAppWord(BdPtr,
	    XAXIDMA_LAST_APPWORD, MAX_PKT_LEN);

	/* If Set app length failed, it is not fatal
	 */
	if (Status != XST_SUCCESS) {
		xil_printf("Set app word failed with %d\r\n", Status);
	}
#endif

	/* For single packet, both SOF and EOF are to be set
	 */
	XAxiDma_BdSetCtrl(BdPtr, XAXIDMA_BD_CTRL_TXEOF_MASK |
						XAXIDMA_BD_CTRL_TXSOF_MASK);

	XAxiDma_BdSetId(BdPtr, (u32) Packet);

	/* Give the BD to DMA to kick off the transmission. */
	Status = XAxiDma_BdRingToHw(TxRingPtr, 1, BdPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("to hw failed %d\r\n", Status);
		return XST_FAILURE;
	}



	return XST_SUCCESS;
}

/*****************************************************************************/
/*
*
* This function checks data buffer after the DMA transfer is finished.
*
* @param	None
*
* @return	- XST_SUCCESS if validation is successful
*		- XST_FAILURE if validation is failure.
*
* @note		None.
*
******************************************************************************/
static int CheckData(void)
{
	u8 *RxPacket;
	int Index = 0;
	u8 Value;


	RxPacket = (u8 *) RX_BUFFER_BASE;
	Value = TEST_START_VALUE;

	/* Invalidate the DestBuffer before receiving the data, in case the
	 * Data Cache is enabled
	 */
	Xil_DCacheInvalidateRange((u32)RxPacket, MAX_PKT_LEN);

	for(Index = 0; Index < MAX_PKT_LEN; Index++) {
		if (RxPacket[Index] != Value) {
			xil_printf("Data error %d: %x/%x\r\n",
			    Index, (unsigned int)RxPacket[Index],
			    (unsigned int)Value);

			return XST_FAILURE;
		}
		Value = (Value + 1) & 0xFF;
	}

	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* This function waits until the DMA transaction is finished, checks data,
* and cleans up.
*
* @param	None
*
* @return	- XST_SUCCESS if DMA transfer is successful and data is correct,
*		- XST_FAILURE if fails.
*
* @note		None.
*
******************************************************************************/
static int CheckDmaResult(XAxiDma * AxiDmaInstPtr)
{
	XAxiDma_BdRing *TxRingPtr;
	XAxiDma_BdRing *RxRingPtr;
	XAxiDma_Bd *BdPtr;
	int ProcessedBdCount;
	int FreeBdCount;
	int Status;

	TxRingPtr = XAxiDma_GetTxRing(AxiDmaInstPtr);
	RxRingPtr = XAxiDma_GetRxRing(AxiDmaInstPtr);

	/* Wait until the one BD TX transaction is done */
	while ((ProcessedBdCount = XAxiDma_BdRingFromHw(TxRingPtr,
						       XAXIDMA_ALL_BDS,
						       &BdPtr)) == 0) {
	}

	/* Free all processed TX BDs for future transmission */
	Status = XAxiDma_BdRingFree(TxRingPtr, ProcessedBdCount, BdPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("Failed to free %d tx BDs %d\r\n",
		    ProcessedBdCount, Status);
		return XST_FAILURE;
	}

	/* Wait until the data has been received by the Rx channel */
	while ((ProcessedBdCount = XAxiDma_BdRingFromHw(RxRingPtr,
						       XAXIDMA_ALL_BDS,
						       &BdPtr)) == 0) {
	}

	/* Check received data */
	if (CheckData() != XST_SUCCESS) {

		return XST_FAILURE;
	}

	/* Free all processed RX BDs for future transmission */
	Status = XAxiDma_BdRingFree(RxRingPtr, ProcessedBdCount, BdPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("Failed to free %d rx BDs %d\r\n",
		    ProcessedBdCount, Status);
		return XST_FAILURE;
	}

	/* Return processed BDs to RX channel so we are ready to receive new
	 * packets:
	 *    - Allocate all free RX BDs
	 *    - Pass the BDs to RX channel
	 */
	FreeBdCount = XAxiDma_BdRingGetFreeCnt(RxRingPtr);
	Status = XAxiDma_BdRingAlloc(RxRingPtr, FreeBdCount, &BdPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("bd alloc failed\r\n");
		return XST_FAILURE;
	}

	Status = XAxiDma_BdRingToHw(RxRingPtr, FreeBdCount, BdPtr);
	if (Status != XST_SUCCESS) {
		xil_printf("Submit %d rx BDs failed %d\r\n", FreeBdCount, Status);
		return XST_FAILURE;
	}

	return XST_SUCCESS;
}