xaxiethernet.c File Reference

#include "xaxiethernet.h"

Functions
	xdbg_stmnt (int indent_on=0;) xdbg_stmnt(u32 _xaxiethernet_rir_value
int	XAxiEthernet_CfgInitialize (XAxiEthernet InstancePtr, XAxiEthernet_Config CfgPtr, u32 EffectiveAddress)
void	XAxiEthernet_Start (XAxiEthernet *InstancePtr)
void	XAxiEthernet_Stop (XAxiEthernet *InstancePtr)
void	XAxiEthernet_Reset (XAxiEthernet *InstancePtr)
int	XAxiEthernet_SetMacAddress (XAxiEthernet InstancePtr, void AddressPtr)
void	XAxiEthernet_GetMacAddress (XAxiEthernet InstancePtr, void AddressPtr)
int	XAxiEthernet_SetOptions (XAxiEthernet *InstancePtr, u32 Options)
int	XAxiEthernet_ClearOptions (XAxiEthernet *InstancePtr, u32 Options)
u32	XAxiEthernet_GetOptions (XAxiEthernet *InstancePtr)
u16	XAxiEthernet_GetOperatingSpeed (XAxiEthernet *InstancePtr)
int	XAxiEthernet_SetOperatingSpeed (XAxiEthernet *InstancePtr, u16 Speed)
void	XAxiEthernet_SetBadFrmRcvOption (XAxiEthernet *InstancePtr)
void	XAxiEthernet_ClearBadFrmRcvOption (XAxiEthernet *InstancePtr)
void	XAxiEthernet_DisableControlFrameLenCheck (XAxiEthernet *InstancePtr)
void	XAxiEthernet_EnableControlFrameLenCheck (XAxiEthernet *InstancePtr)
void	XAxiEthernet_PhySetMdioDivisor (XAxiEthernet *InstancePtr, u8 Divisor)
void	XAxiEthernet_PhyRead (XAxiEthernet InstancePtr, u32 PhyAddress, u32 RegisterNum, u16 PhyDataPtr)
void	XAxiEthernet_PhyWrite (XAxiEthernet *InstancePtr, u32 PhyAddress, u32 RegisterNum, u16 PhyData)

Detailed Description

The APIs in this file takes care of the primary functionalities of the driver. The APIs in this driver take care of the following:

Starting or stopping the Axi Ethernet device
Initializing and resetting the Axi Ethernet device
Setting MAC address and speed/duplex of the device
Provide means for controlling the PHY and communicating with it.
Turn on/off various features/options provided by the Axi Ethernet device. See xaxiethernet.h for a detailed description of the driver.
```
 MODIFICATION HISTORY:
```

 Ver   Who  Date     Changes
 ----- ---- -------- -------------------------------------------------------
 1.00a asa  6/30/10 First release based on the ll temac driver
 1.02a asa  2/16/11 Made changes in XAxiEthernet_Reset to insert delays.
 3.02a srt  4/13/13 Removed Warnings (CR 704998).

Function Documentation

int XAxiEthernet_CfgInitialize	(	XAxiEthernet *	InstancePtr,
		XAxiEthernet_Config *	CfgPtr,
		u32	EffectiveAddress
	)

XAxiEthernet_CfgInitialize initializes an AXI Ethernet device along with the InstancePtr that references it.

The PHY is setup independently from the Ethernet core. Use the MII or whatever other interface may be present for setup.

Parameters:

	InstancePtr	references the memory instance to be associated with the AXI Ethernet core instance upon initialization.
	CfgPtr	references the structure holding the hardware configuration for the Axi Ethernet core to initialize.
	EffectiveAddress	is the processor address used to access the base address of the AXI Ethernet instance. In systems with an MMU and virtual memory, EffectiveAddress is the virtual address mapped to the physical in `ConfigPtr->Config.BaseAddress`. In systems without an active MMU, EffectiveAddress should be set to the same value as `ConfigPtr->Config.BaseAddress`.

Returns:: XST_SUCCESS.

Note:: None.

void XAxiEthernet_ClearBadFrmRcvOption ( XAxiEthernet * InstancePtr )

XAxiEthernet_ClearBadFrmRcvOption is used to disable the bad frame receive option.

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Returns:: None.

Note:: None.

int XAxiEthernet_ClearOptions	(	XAxiEthernet *	InstancePtr,
		u32	Options
	)

XAxiEthernet_ClearOptions clears the options, Options for the Axi Ethernet, specified by InstancePtr. Axi Ethernet should be stopped with XAxiEthernet_Stop() before changing options.

Parameters:

	InstancePtr	is a pointer to the Axi Ethernet instance to be worked on.
	Options	is a bitmask of OR'd XAE_*_OPTION values for options to clear. Options not specified are not affected.

Returns:

XST_SUCCESS on successful completion.
XST_DEVICE_IS_STARTED if the device has not been stopped.

Note:: See xaxiethernet.h for a description of the available options.

void XAxiEthernet_DisableControlFrameLenCheck ( XAxiEthernet * InstancePtr )

XAxiEthernet_DisableControlFrameLenCheck is used to disable the length check for control frames (pause frames). This means once the API is called, control frames larger than the minimum frame length are accepted.

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Returns:: None.

Note:: None.

void XAxiEthernet_EnableControlFrameLenCheck ( XAxiEthernet * InstancePtr )

XAxiEthernet_EnableControlFrameLenCheck is used to enable the length check for control frames (pause frames). After calling the API, all control frames received will be checked for proper length (less than minimum frame length). By default, upon normal start up, control frame length check is enabled. Hence this API needs to be called only if previously the control frame length check has been disabled by calling the API XAxiEthernet_DisableControlFrameLenCheck.

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Returns:: None.

Note:: None.

void XAxiEthernet_GetMacAddress	(	XAxiEthernet *	InstancePtr,
		void *	AddressPtr
	)

XAxiEthernet_GetMacAddress gets the MAC address for the Axi Ethernet, specified by InstancePtr into the memory buffer specified by AddressPtr.

Parameters:

	InstancePtr	is a pointer to the Axi Ethernet instance to be worked on.
	AddressPtr	references the memory buffer to store the retrieved MAC address. This memory buffer must be at least 6 bytes in length.

Returns:: None.

Note:

This routine also supports the extended/new VLAN and multicast mode. The XAE_RAF_NEWFNCENBL_MASK bit dictates which offset will be configured.

u16 XAxiEthernet_GetOperatingSpeed ( XAxiEthernet * InstancePtr )

XAxiEthernet_GetOperatingSpeed gets the current operating link speed. This may be the value set by XAxiEthernet_SetOperatingSpeed() or a hardware default.

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Returns:: Returns the link speed in units of megabits per second (10 / 100 / 1000). Can return a value of 0, in case it does not get a valid speed from EMMC.

Note:: None.

u32 XAxiEthernet_GetOptions ( XAxiEthernet * InstancePtr )

XAxiEthernet_GetOptions returns the current option settings.

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Returns:: Returns a bitmask of XAE_*_OPTION constants, each bit specifying an option that is currently active.

Note:: See xaxiethernet.h for a description of the available options.

void XAxiEthernet_PhyRead	(	XAxiEthernet *	InstancePtr,
		u32	PhyAddress,
		u32	RegisterNum,
		u16 *	PhyDataPtr
	)

void XAxiEthernet_PhySetMdioDivisor	(	XAxiEthernet *	InstancePtr,
		u8	Divisor
	)

XAxiEthernet_PhySetMdioDivisor sets the MDIO clock divisor in the Axi Ethernet,specified by InstancePtr to the value, Divisor. This function must be called once after each reset prior to accessing MII PHY registers.

From the Virtex-6(TM) and Spartan-6 (TM) Embedded Tri-Mode Ethernet MAC User's Guide, the following equation governs the MDIO clock to the PHY:

 			f[HOSTCLK]
	f[MDC] = -----------------------
			(1 + Divisor) * 2

where f[HOSTCLK] is the bus clock frequency in MHz, and f[MDC] is the MDIO clock frequency in MHz to the PHY. Typically, f[MDC] should not exceed 2.5 MHz. Some PHYs can tolerate faster speeds which means faster access.

Parameters:

	InstancePtr	references the Axi Ethernet instance on which to operate.
	Divisor	is the divisor value to set within the range of 0 to XAE_MDIO_MC_CLK_DVD_MAX.

Note:: None.

void XAxiEthernet_PhyWrite	(	XAxiEthernet *	InstancePtr,
		u32	PhyAddress,
		u32	RegisterNum,
		u16	PhyData
	)

void XAxiEthernet_Reset ( XAxiEthernet * InstancePtr )

XAxiEthernet_Reset does not perform a soft reset of the AxiEthernet core. AxiEthernet hardware is reset by the device connected to the AXI4-Stream interface. This function inserts some delay before proceeding to check for MgtRdy bit. The delay is necessary to be at a safe side. It takes a while for the reset process to complete and for any of the AxiEthernet registers to be accessed. It then checks for MgtRdy bit in IS register to know if AxiEthernet reset is completed or not. Subsequently it calls one more driver function to complete the AxiEthernet hardware initialization.

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Note:: It is the responsibility of the user to reset the AxiEthernet hardware before using it. AxiEthernet hardware should be reset through the device connected to the AXI4-Stream interface of AxiEthernet.

void XAxiEthernet_SetBadFrmRcvOption ( XAxiEthernet * InstancePtr )

XAxiEthernet_SetBadFrmRcvOption is used to enable the bad frame receive option. If enabled, this option ensures that bad receive frames are allowed and passed to the AXI4-Stream interface as if they are good frames.

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Returns:: None.

Note:: None

int XAxiEthernet_SetMacAddress	(	XAxiEthernet *	InstancePtr,
		void *	AddressPtr
	)

XAxiEthernet_SetMacAddress sets the MAC address for the Axi Ethernet device, specified by InstancePtr to the MAC address specified by AddressPtr. The Axi Ethernet device must be stopped before calling this function.

Parameters:

	InstancePtr	is a pointer to the Axi Ethernet instance to be worked on.
	AddressPtr	is a reference to the 6-byte MAC address to set.

Returns:

XST_SUCCESS on successful completion.
XST_DEVICE_IS_STARTED if the Axi Ethernet device has not stopped,

Note:: This routine also supports the extended/new VLAN and multicast mode. The XAE_RAF_NEWFNCENBL_MASK bit dictates which offset will be configured.

int XAxiEthernet_SetOperatingSpeed	(	XAxiEthernet *	InstancePtr,
		u16	Speed
	)

XAxiEthernet_SetOperatingSpeed sets the current operating link speed. For any traffic to be passed, this speed must match the current MII/GMII/SGMII/RGMII link speed.

Parameters:

	InstancePtr	references the Axi Ethernet on which to operate.
	Speed	is the speed to set in units of Mbps. Valid values are 10, 100, or 1000.

Returns:

- XST_SUCCESS on successful setting of speed.

XST_FAILURE, if the speed cannot be set for the present harwdare configuration.

Note:: None.

int XAxiEthernet_SetOptions	(	XAxiEthernet *	InstancePtr,
		u32	Options
	)

XAxiEthernet_SetOptions enables the options, Options for the Axi Ethernet, specified by InstancePtr. Axi Ethernet should be stopped with XAxiEthernet_Stop() before changing options.

Parameters:

	InstancePtr	is a pointer to the Axi Ethernet instance to be worked on.
	Options	is a bitmask of OR'd XAE_*_OPTION values for options to set. Options not specified are not affected.

Returns:

XST_SUCCESS on successful completion.
XST_DEVICE_IS_STARTED if the device has not been stopped.

Note:: See xaxiethernet.h for a description of the available options.

void XAxiEthernet_Start ( XAxiEthernet * InstancePtr )

XAxiEthernet_Start starts the Axi Ethernet device as follows:

Enable transmitter if XAE_TRANSMIT_ENABLE_OPTION is set
Enable receiver if XAE_RECEIVER_ENABLE_OPTION is set

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Returns:: None.

Note:: None.

void XAxiEthernet_Stop ( XAxiEthernet * InstancePtr )

XAxiEthernet_Stop gracefully stops the Axi Ethernet device as follows:

Disable all interrupts from this device
Disable the receiver

XAxiEthernet_Stop does not modify any of the current device options.

Since the transmitter is not disabled, frames currently in internal buffers or in process by a DMA engine are allowed to be transmitted.

Parameters:

InstancePtr

is a pointer to the Axi Ethernet instance to be worked on.

Returns:: None

Note:: None.

xdbg_stmnt ( int indent_on = 0; )

Xilinx Processor IP Library

xaxiethernet.c File Reference

Functions

Detailed Description

Function Documentation