4ef87ec22c
This patch adds HDCP example and modifies examples, index, readme files. Signed-off-by: Shadul Shaikh <shaduls@xilinx.com> Acked-by: Andrei Simion <andreis@xilinx.com>
43 lines
2.2 KiB
Text
43 lines
2.2 KiB
Text
******************************************************************************/
|
|
* <pre>
|
|
* MODIFICATION HISTORY:
|
|
*
|
|
* Ver Who Date Changes
|
|
* ---- --- -------- --------------------------------------------------
|
|
* 1.00 sha 10/05/15 Added modification header
|
|
* Changed DpTxSs_Setup --> DpRxSs_Setup.
|
|
* Added HDCP example.
|
|
* </pre>
|
|
*
|
|
******************************************************************************/
|
|
There are 4 DisplayPort Receiver Subsystem examples include in this directory:
|
|
1) xdprxss_selftest_example.c : This self test example will call self test
|
|
functions of each DisplayPort RX Subsystem's sub-cores to verify that the sub-cores
|
|
are programmed.
|
|
|
|
2) xdprxss_mst_example.c : This multi-stream transport (MST) example shows how to
|
|
configure driver for MST/SST based upon system configuration parameters.
|
|
For this example, interrupt controller and timer controller must be present.
|
|
|
|
3) xdprxss_intr_example.c : This interrupt example shows how to set up the interrupt
|
|
system and specify the interrupt handlers for when a DisplayPort RX Subsystem
|
|
interrupt event occurs. An interrupt controller with a connection to the DisplayPort
|
|
RX Subsystem interrupt signal needs to exist in the hardware system.
|
|
|
|
4) xdprxss_debug_example.c : The debug example setup MST/SST mode based on system confi-
|
|
guration parameters and prints debug information at the end.
|
|
|
|
5) xdprxss_hdcp_example.c : The HDCP example setup SST mode and enables the HDCP after
|
|
RX has started.
|
|
|
|
Additionally, in order to be able to use the interrupt, MST/SST, and debug examples,
|
|
the user will need to implement following functions:
|
|
1) DpRxSs_PlatformInit : This function needs to do all hardware system
|
|
initialization.
|
|
2) DpRxSs_VideoPhyInit : These function need to configure the Video Phy using video phy
|
|
driver functions. For information, refer video phy driver documentation.
|
|
3) DpRxSs_Setup : These function need to configure the DisplayPort RX Subsystem using
|
|
DPRX Subsystem driver functions. For information, refer DPRXSS driver documentation.
|
|
|
|
Note: All example functions start with DpRxSs_*, while all DisplayPort RX Subsystem
|
|
driver functions start with XDpRxSs_*.
|