1e332095b8
This patch adds HDCP example and modifies examples, readme, index files. Signed-off-by: Shadul Shaikh <shaduls@xilinx.com> Acked-by: Andrei Simion <andreis@xilinx.com>
43 lines
No EOL
2.2 KiB
Text
43 lines
No EOL
2.2 KiB
Text
******************************************************************************/
|
|
* <pre>
|
|
* MODIFICATION HISTORY:
|
|
*
|
|
* Ver Who Date Changes
|
|
* ---- --- -------- --------------------------------------------------
|
|
* 1.00 sha 09/28/15 Added modification header
|
|
* Added HDCP example.
|
|
* </pre>
|
|
*
|
|
******************************************************************************/
|
|
There are 4 DisplayPort Transmitter Subsystem examples include in this directory:
|
|
1) xdptxss_selftest_example.c : This self test example will call self test
|
|
functions of each DisplayPort TX Subsystem's sub-cores to verify that the sub-cores
|
|
are programmed.
|
|
|
|
2) xdptxss_mst_example.c : This multi-stream transport (MST) example shows how to use
|
|
the drivers's MST capabilities. This example reads the RX device MST capability.
|
|
Upon MST/SST capability, example sets the transport mode.
|
|
|
|
3) xdptxss_intr_example.c : This interrupt example shows how to set up the interrupt
|
|
system and specify the interrupt handlers for when a DisplayPort TX Subsystem
|
|
interrupt event occurs. An interrupt controller with a connection to the DisplayPort
|
|
TX Subsystem interrupt signal needs to exist in the hardware system.
|
|
|
|
4) xdptxss_debug_example.c : The debug example set up MST/SST mode based on RX capability
|
|
and prints debug information at the end. This example check whether DisplayPort TX
|
|
Subsystem is programmed in SST/MST. Upon MST/SST, reads EDID information and prints.
|
|
|
|
5) xdptxss_hdcp_example.c : The HDCP example setup SST mode and enables the HDCP after
|
|
RX has started.
|
|
|
|
Additionally, in order to be able to use the interrupt, MST/SST, and debug examples,
|
|
the user will need to implement following functions:
|
|
1) DpTxSs_PlatformInit : This function needs to do all hardware system
|
|
initialization.
|
|
2) DpTxSs_StreamSrc* : These function need to configure the source of the stream
|
|
(pattern generators, video input, etc.) such that a video stream, with
|
|
timings and video attributes that correspond to the main stream attributes
|
|
(MSA) configuration, is received by the DisplayPort TX Subsystem.
|
|
|
|
Note: All example functions start with DpRxSs_*, while all DisplayPort TX Subsystem
|
|
driver functions start with XDpTxSs_*. |