embeddedsw/XilinxProcessorIPLib/drivers/wdtps/examples/xwdtps_intr_example.c

/******************************************************************************
*
* Copyright (C) 2010 - 2014 Xilinx, Inc.  All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xwdtps_intr_example.c
*
* This file contains a design example using the System Watchdog Timer Device
* (WdtPs) driver and hardware device using interrupt mode. This test
* assumes that the RESET OUTPUT OF WDT IS NOT CONNECTED to the processor and
* the IRQ output is connected to an interrupt controller attached to the
* processor
*
*
* @note
*
* <pre>
*
* MODIFICATION HISTORY:
*
* Ver   Who    Date     Changes
* ----- ------ -------- ---------------------------------------------
* 1.00a ecm/jz 01/15/10 First release
* </pre>
*
******************************************************************************/

/***************************** Include Files *********************************/

#include "xparameters.h"
#include "xwdtps.h"
#include "xscugic.h"
#include "xil_exception.h"
#include "xil_printf.h"

/************************** Constant Definitions *****************************/

/*
 * The following constants map to the XPAR parameters created in the
 * xparameters.h file. They are only defined here such that a user can easily
 * change all the needed parameters in one place.
 */
#define WDT_DEVICE_ID		XPAR_XWDTPS_0_DEVICE_ID
#define INTC_DEVICE_ID		XPAR_SCUGIC_SINGLE_DEVICE_ID
#define WDT_IRPT_INTR		XPAR_XWDTPS_0_INTR

/**************************** Type Definitions *******************************/
#define HANDLER_CALLED  0xFFFFFFFF

/***************** Macros (Inline Functions) Definitions *********************/

/************************** Function Prototypes ******************************/

int WdtPsIntrExample(XScuGic *IntcInstancePtr, XWdtPs * WdtInstancePtr,
		       u16 WdtDeviceId, u16 WdtIntrId);

static void WdtIntrHandler(void *CallBackRef);

static int WdtSetupIntrSystem(XScuGic *IntcInstancePtr,
				  XWdtPs * WdtInstancePtr, u16 WdtIntrId);

static void WdtDisableIntrSystem(XScuGic *IntcInstancePtr, u16 WdtIntrId);

/************************** Variable Definitions *****************************/

XWdtPs WdtInstance;		/* Instance of WatchDog Timer */
XScuGic IntcInstance;		/* Instance of the Interrupt Controller */

volatile u32 HandlerCalled;	/* flag is set when timeout interrupt occurs */

/*****************************************************************************/
/**
* Main function to call the Wdt interrupt example.
*
* @param	None.
*
* @return	XST_SUCCESS if successful, otherwise XST_FAILURE.
*
* @note		None.
*
******************************************************************************/
int main(void)
{
	int Status;

	xil_printf("WDT Interrupt Example Test\r\n");

	/*
	 * Call the interrupt example, specify the parameters generated in
	 * xparameters.h
	 */
	Status = WdtPsIntrExample(&IntcInstance,
				&WdtInstance, WDT_DEVICE_ID, WDT_IRPT_INTR);
	if (Status != XST_SUCCESS) {
		xil_printf("WDT Interrupt Example Test Failed\r\n");
		return XST_FAILURE;
	}

	xil_printf("Successfully ran WDT Interrupt Example Test\r\n");
	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* This function tests the functioning of the System WatchDog Timer driver in the
* Interrupt mode.
*
* After one expiration of the timeout interval, an interrupt is generated and
* the WDT state bit is set to one in the status register.
*
* This function assumes that the reset output of the Wdt device is not
* connected to the reset of the processor, otherwise, the timer will cause the
* processor to reset when it expires.
*
* @param	IntcInstancePtr is a pointer to the instance of the XScuGic
*		driver.
* @param	WdtInstancePtr is a pointer to the instance of XWdtPs driver.
* @param	WdtDeviceId is the Device ID of the XWdtPs device.
* @param	WdtIntrId is the Interrupt Id of the XWdtPs device.
*
* @return	XST_SUCCESS if successful, otherwise XST_FAILURE.
*
* @note		None.
*
******************************************************************************/
int WdtPsIntrExample(XScuGic *IntcInstancePtr,
		  XWdtPs * WdtInstancePtr, u16 WdtDeviceId, u16 WdtIntrId)
{
	int Status;
	u32 Timebase = 0;
	u32 ExpiredTimeDelta = 0;
	u32 EffectiveAddress;	/* This can be the virtual address */
	XWdtPs_Config *ConfigPtr;


	/*
	 * Initialize the Wdt driver.
	 */
	ConfigPtr = XWdtPs_LookupConfig(WdtDeviceId);

	/*
	 * This is where the virtual address would be used, this example
	 * uses physical address.
	 */
	EffectiveAddress = ConfigPtr->BaseAddress;

	Status = XWdtPs_CfgInitialize(WdtInstancePtr, ConfigPtr,
				       EffectiveAddress);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	/*
	 * Perform a self-test to ensure that the hardware was built correctly.
	 */
	Status = XWdtPs_SelfTest(WdtInstancePtr);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	/*
	 * Set the initial counter restart to the smallest value (0).
	 */
	XWdtPs_SetControlValue(WdtInstancePtr,
				(u8) XWDTPS_COUNTER_RESET, (u8) 0);

	/*
	 * Set the initial Divider ratio at the smallest value.
	 */
	XWdtPs_SetControlValue(WdtInstancePtr,
				(u8) XWDTPS_CLK_PRESCALE,
				(u8) XWDTPS_CCR_PSCALE_0008);

	/*
	 * Disable the RESET output.
	 */
	XWdtPs_DisableOutput(WdtInstancePtr, XWDTPS_RESET_SIGNAL);

	/*
	 * Start the Wdt device.
	 */
	XWdtPs_Start(WdtInstancePtr);

	/*
	 * Restart the timer.
	 */
	XWdtPs_RestartWdt(WdtInstancePtr);

	/*
	 * Determine how long it takes for the Watchdog Timer to expire
	 * for later processing.
	 * If the reset output of the device is connected to the processor,
	 * the following code will cause a reset.
	 */
	while (1) {
		if (!(XWdtPs_IsWdtExpired(WdtInstancePtr))) {
			ExpiredTimeDelta++;
		} else {
			break;
		}
	}

	/*
	 * Stop the timer to set up the device in interrupt mode.
	 */
	XWdtPs_Stop(WdtInstancePtr);

	/*
	 * Connect to the interrupt subsystem so that interrupts can occur.
	 */
	Status = WdtSetupIntrSystem(IntcInstancePtr, WdtInstancePtr, WdtIntrId);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	/*
	 * Enable the IRQ output.
	 */
	XWdtPs_EnableOutput(WdtInstancePtr, (u8) XWDTPS_IRQ_SIGNAL);

	/*
	 * Start the Wdt device.
	 */
	HandlerCalled = 0;

	XWdtPs_Start(WdtInstancePtr);

	XWdtPs_RestartWdt(WdtInstancePtr);

	/*
	 * Verify that the Watchdog Timer does  timeout when not restarted
	 * all the time, wait more than the amount of time it took for it
	 * to expire in the previous test.
	 */
	while (1) {
		/*
		 * If the handler is called, the test passed
		 */
		if ((HandlerCalled != 0)) {
			break;
		}

		/*
		 * If more time has gone past than it took for it to expire
		 * when not restarted in the previous test, then stop since the
		 * handler was never called failing the test.
		 */

		Timebase++;
		if (Timebase > ExpiredTimeDelta + ExpiredTimeDelta) {
			/*
			 * Disable and disconnect the interrupt system.
			 */

			WdtDisableIntrSystem(IntcInstancePtr, WdtIntrId);
			return XST_FAILURE;
		}

		/*
		 * If the Watchdog Timer expired and handler was not called,
		 * then the test failed.
		 */
		if ((XWdtPs_IsWdtExpired(WdtInstancePtr)) &&
		    (HandlerCalled == 0)) {
			/*
			 * Disable and disconnect the interrupt system.
			 */
				WdtDisableIntrSystem(IntcInstancePtr,
							WdtIntrId);
			return XST_FAILURE;
		}
	}

	/*
	 * Restart the device to allow the next test to run normally.
	 */
	XWdtPs_RestartWdt(WdtInstancePtr);

	HandlerCalled = 0;

	/*
	 * Verify that the Watchdog Timer does not timeout when restarted
	 * all the time, wait more than the amount of time it took for it
	 * to expire in the previous test.
	 */
	while (1) {
		/*
		 * Reset the WDT each pass through the loop
		 */
		XWdtPs_RestartWdt(WdtInstancePtr);

		/*
		 * If more time has gone past than it took for it to expire
		 * when not restarted in the previous test, then stop as the
		 * restarting worked.
		 */
		Timebase++;
		if (Timebase > ExpiredTimeDelta + ExpiredTimeDelta) {
			break;
		}

		/*
		 * If the Watchdog Timer expired and/or handler called, then the
		 * test failed.
		 */
		if ((XWdtPs_IsWdtExpired(WdtInstancePtr)) ||
		    (HandlerCalled != 0)) {
			/*
			 * Disable and disconnect the interrupt system.
			 */
			WdtDisableIntrSystem(IntcInstancePtr, WdtIntrId);
			return XST_FAILURE;
		}
	}

	/*
	 * Disable and disconnect the interrupt system.
	 */
	WdtDisableIntrSystem(IntcInstancePtr, WdtIntrId);

	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* This function sets up the interrupt system such that interrupts can occur
* for the device. This function is application specific since the actual
* system may or may not have an interrupt controller. The device could be
* directly connected to a processor without an interrupt controller. The
* user should modify this function to fit the application.
*
* @param	IntcInstancePtr is a pointer to the instance of ScuGic driver.
* @param	WdtInstancePtr is a pointer to the instance of XWdtPs driver.
* @param	WdtIntrId is the Interrupt Id of the XWdtPs device.
*
* @return	XST_SUCCESS if successful, otherwise XST_FAILURE.
*
* @note		None.
*
******************************************************************************/
static int WdtSetupIntrSystem(XScuGic *IntcInstancePtr,
				XWdtPs *WdtInstancePtr, u16 WdtIntrId)
{
	int Status;
	XScuGic_Config *IntcConfig;
	u8 Priority, Trigger;

	Xil_ExceptionInit();

	/*
	 * Initialize the interrupt controller driver so that it is ready to
	 * use.
	 */
	IntcConfig = XScuGic_LookupConfig(INTC_DEVICE_ID);
	if (NULL == IntcConfig) {
		return XST_FAILURE;
	}

	Status = XScuGic_CfgInitialize(IntcInstancePtr, IntcConfig,
					IntcConfig->CpuBaseAddress);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	XScuGic_GetPriorityTriggerType(IntcInstancePtr, WdtIntrId,
	                                            &Priority, &Trigger);
	Trigger = 3;
	XScuGic_SetPriorityTriggerType(IntcInstancePtr, WdtIntrId,
				    Priority, Trigger);

	/*
	 * Connect the interrupt controller interrupt handler to the hardware
	 * interrupt handling logic in the processor.
	 */
	Xil_ExceptionRegisterHandler(XIL_EXCEPTION_ID_INT,
				(Xil_ExceptionHandler)XScuGic_InterruptHandler,
				IntcInstancePtr);

	/*
	 * Connect the device driver handler that will be called when an
	 * interrupt for the device occurs, the handler defined above performs
	 * the specific interrupt processing for the device.
	 */
	Status = XScuGic_Connect(IntcInstancePtr, WdtIntrId,
				(Xil_ExceptionHandler)WdtIntrHandler,
				(void *)WdtInstancePtr);
	if (Status != XST_SUCCESS) {
		return Status;
	}

	/*
	 * Enable the interrupt for the device.
	 */
	XScuGic_Enable(IntcInstancePtr, WdtIntrId);

	/*
	 * Enable interrupts in the Processor.
	 */
	Xil_ExceptionEnable();

	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* This function is the Interrupt handler for the WDT Interrupt of the
* Wdt device. It is called on the expiration of the timer counter in
* interrupt context.
*
* @param	CallBackRef is a pointer to the callback function.
*
* @return	None.
*
* @note		None.
*
******************************************************************************/
static void WdtIntrHandler(void *CallBackRef)
{
	/*
	 * WDT timed out and interrupt occurred, let main test loop know.
	 */
	HandlerCalled = HANDLER_CALLED;
}

/*****************************************************************************/
/**
*
* This function disables the interrupts that occur for the device.
*
* @param	IntcInstancePtr is the pointer to the instance of XScuGic
*		driver.
* @param	WdtIntrId is the Interrupt Id for the device.
*
* @return	None.
*
* @note		None.
*
******************************************************************************/
static void WdtDisableIntrSystem(XScuGic *IntcInstancePtr, u16 WdtIntrId)
{

	/*
	 * Disconnect and disable the interrupt for the Wdt.
	 */
	XScuGic_Disconnect(IntcInstancePtr, WdtIntrId);

}