Xilinx Embedded Software (embeddedsw) Development
7f958b6415
Read the phy idetifier register to identify whether PHY is Marvell or TI. Add support for TI PHY sequence by writing to PHY CNTRL register and tuning using RGMIICTL/RGMIIDCTL registers. Access to extended registers in TI pHY is through REGCR and ADDAR registers. ADDAR should be used to write the offset of register to be written and then the value to be written. REGCR should indicate when ADDAR contains register offset and when it contains register data. Signed-off-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> |
||
|---|---|---|
| doc | ||
| lib | ||
| mcap/linux | ||
| ThirdParty | ||
| XilinxProcessorIPLib/drivers | ||
| license.txt | ||
| README.txt | ||
embeddedsw.git - repo for standalone software All software is version less and divided into three directories - lib contains bsp, zynq fsbl and software services like xilisf - license.txt contains information about the various licenses and copyrights - XilinxProcessorIPLib contains all drivers - ThirdParty software from third party like light weight IP stack - mcap software for using MCAP interface on Ultra Scale boards to program 2nd level bitstream Every driver/lib/apps/services has these sub-directories 1. data - contains tcl, mdd, testapp tcl or header files used in SDK 2. doc - documentation of source code in form of pdf or html 3. examples - illustrating different use cases of driver 4. src - driver interface code implementing functionality of IP <repo> |-XilinxProcessorIPLib | |- drivers | |- uartps | |- data | |- src | |- doc | |- examples | |-lib | |- bsp | |- standalone | |- data | |- src | |- cortexa9 | |- microblaze | |- common | |- profile | |- doc | |- xilkernel | |- data | |- doc | |- src | |- sw_apps | |- zynq_fsbl [described below] | |- sw_services | |- xilffs | |- xilskey | |- xilmfs | |- xilrsa | |- xilflash | |- xilisf | | Note - All these are libraries and utilize drivers | |-ThirdParty | |- sw_services | |- lwip140 | |-mcap | |-linux Building FSBL from git: FSBL has 3 directories. 1. data - It contains files for SDK 2. src - It contains the FSBK source files 3. misc - It contains miscelanious files required to compile FSBL for zc702, zc706, zed and microzed boards. It also contains the ps7_init_gpl.[c/h] with gpl header in respective board directories. How to compile FSBL: 1.Go to the Fsbl src directory "lib/sw_apps/zynq_fsbl/src/" 2. make "BOARD=<>" "CC=<>" a. Values for BOARD are zc702, zc706, zed, microzed b. Value for CC is arm-xilinx-eabi-gcc. Default value is also same. 3.Give "make" to compile the fsbl with BSP. By default it is built for zc702 board with arm-xilinx-eabi-gcc compiler 4.Below are the examples for compiling for different options a. To generate Fsbl for zc706 board i.make "BOARD=zc706" b.To generate Fsbl for zc702 board with debug enable and RSA support i.make "BOARD=zc702" "CFLAGS=-DFSBL_DEBUG_INFO -DRSA_SUPPORT" c.To generate Fsbl for zc706 board and compile with arm-xilinx-eabi-gcc with MMC support i.make "BOARD=zc706" "CC=arm-xilinx-eabi-gcc" "CFLAGS=-DMMC_SUPPORT"