There are 4 DisplayPort Receiver Subsystem examples include in this directory:
1) xdprxss_selftest_example.c : This self test example will call self test
functions of each DisplayPort RX Subsystem's sub-cores to verify that the sub-cores
are programmed.
2) xdprxss_mst_example.c : This multi-stream transport (MST) example shows how to
configure driver for MST/SST based upon system configuration parameters.
For this example, interrupt controller and timer controller must be present.
3) xdprxss_intr_example.c : This interrupt example shows how to set up the interrupt
system and specify the interrupt handlers for when a DisplayPort RX Subsystem
interrupt event occurs. An interrupt controller with a connection to the DisplayPort
RX Subsystem interrupt signal needs to exist in the hardware system.
4) xdprxss_debug_example.c : The debug example setup MST/SST mode based on system confi-
guration parameters and prints debug information at the end.
Additionally, in order to be able to use the interrupt, MST/SST, and debug examples,
the user will need to implement following functions:
1) DpRxSs_PlatformInit : This function needs to do all hardware system
initialization.
2) DpRxSs_VideoPhyInit : These function need to configure the Video Phy using video phy
driver functions. For information, refer video phy driver documentation.
3) DpTxSs_Setup : These function need to configure the DisplayPort TX Subsystem using
DPTX Subsystem driver functions. For information, refer DPTXSS driver documentation.
Note: All example functions start with DpRxSs_*, while all DisplayPort RX Subsystem
driver functions start with XDpRxSs_*.
c04ad88a10