There are 4 DisplayPort Transmitter Subsystem examples include in this directory:
1) xdptxss_selftest_example.c : This self test example will call self test
functions of each DisplayPort TX Subsystem's sub-cores to verify that the sub-cores
are programmed.
2) xdptxss_mst_example.c : This multi-stream transport (MST) example shows how to use
the drivers's MST capabilities. This example reads the RX device MST capability.
Upon MST/SST capability, example sets the transport mode.
3) xdptxss_intr_example.c : This interrupt example shows how to set up the interrupt
system and specify the interrupt handlers for when a DisplayPort TX Subsystem
interrupt event occurs. An interrupt controller with a connection to the DisplayPort
TX Subsystem interrupt signal needs to exist in the hardware system.
4) xdptxss_debug_example.c : The debug example set up MST/SST mode based on RX capability
and prints debug information at the end. This example check whether DisplayPort TX
Subsystem is programmed in SST/MST. Upon MST/SST, reads EDID information and prints.
Additionally, in order to be able to use the interrupt, MST/SST, and debug examples,
the user will need to implement following functions:
1) DpTxSs_PlatformInit : This function needs to do all hardware system
initialization.
2) DpTxSs_StreamSrc* : These function need to configure the source of the stream
(pattern generators, video input, etc.) such that a video stream, with
timings and video attributes that correspond to the main stream attributes
(MSA) configuration, is received by the DisplayPort TX Subsystem.
Note: All example functions start with DpRxSs_*, while all DisplayPort TX Subsystem
driver functions start with XDpTxSs_*.
96076602b1