Xilinx Embedded Software (embeddedsw) Development
Find a file
P L Sai Krishna 56ea0274df sdps: Polled for transfer complete for cmd6.
This patch does following things:
Added polling for transfer complete for cmd6 in case
of eMMC and MMC card.
Added 2.0 controller version check in case of eMMC to
switch for High speed mode in Zynq.
Added check for eMMC card, since HS200 mode switching
will only support by eMMC.

Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Acked-by: Harini Katakam <harinik@xilinx.com>
2015-10-22 23:17:37 +05:30
doc update the changelog 2015-09-04 18:05:38 +05:30
lib sw_apps:zynqmp_fsbl: Skip power-up requests for QEMU 2015-10-22 23:06:07 +05:30
mcap/linux mcap: linux: Fix race condition while programming bitfiles 2015-07-31 16:54:57 +05:30
ThirdParty ThirdParty bsp: added support for cortex-a53 to FreeRTOS 2015-10-21 16:30:48 +05:30
XilinxProcessorIPLib/drivers sdps: Polled for transfer complete for cmd6. 2015-10-22 23:17:37 +05:30
license.txt license: Add license.txt file 2015-07-31 16:54:47 +05:30
README.txt mcap: Add MCAP Linux Library 2015-07-31 16:54:48 +05:30

embeddedsw.git - repo for standalone software

All software is version less and divided into three directories
	- lib
		contains bsp, zynq fsbl and software services like xilisf
	- license.txt
		contains information about the various licenses and copyrights
	- XilinxProcessorIPLib
		contains all drivers
	- ThirdParty
		software from third party like light weight IP stack
	- mcap
		software for using MCAP interface on Ultra Scale boards to
		program 2nd level bitstream

Every driver/lib/apps/services has these sub-directories

1. data		- contains tcl, mdd, testapp tcl or header files used in SDK
2. doc		- documentation of source code in form of pdf or html
3. examples	- illustrating different use cases of driver
4. src		- driver interface code implementing functionality of IP


<repo>
|-XilinxProcessorIPLib
|	|- drivers
|		|- uartps
|			|- data
|			|- src
|			|- doc
|			|- examples
|
|-lib
|	|- bsp
|		|- standalone
|			|- data
|			|- src
|				|- cortexa9
|				|- microblaze
|				|- common
|				|- profile
|			|- doc
|		|- xilkernel
|			|- data
|			|- doc
|			|- src
|	|- sw_apps
|		|- zynq_fsbl [described below]
|	|- sw_services
|		|- xilffs
|		|- xilskey
|		|- xilmfs
|		|- xilrsa
|		|- xilflash
|		|- xilisf
|
|	Note - All these are libraries and utilize drivers
|
|-ThirdParty
|	|- sw_services
|        	|- lwip140
|
|-mcap
|	|-linux


Building FSBL from git:

FSBL has 3 directories.
	1. data - It contains files for SDK
	2. src  - It contains the FSBK source files
	3. misc - It contains miscelanious files required to
		  compile FSBL for zc702, zc706, zed and
		  microzed boards.
		  It also contains the ps7_init_gpl.[c/h] with gpl
		  header in respective board directories.


How to compile FSBL:
	1.Go to the Fsbl src directory "lib/sw_apps/zynq_fsbl/src/"
	2. make "BOARD=<>" "CC=<>"
		a. Values for BOARD  are zc702, zc706, zed, microzed
		b. Value for CC is arm-xilinx-eabi-gcc. Default value is also same.
	3.Give "make" to compile the fsbl with BSP. By default it is
	  built for zc702 board with arm-xilinx-eabi-gcc compiler
	4.Below are the examples for compiling for different options
		a. To generate Fsbl for zc706 board
			i.make "BOARD=zc706"
		b.To generate Fsbl for zc702 board with debug enable
		  and RSA support
			i.make "BOARD=zc702" "CFLAGS=-DFSBL_DEBUG_INFO -DRSA_SUPPORT"
		c.To generate Fsbl for zc706 board and compile with arm-xilinx-eabi-gcc
		  with MMC support
			i.make "BOARD=zc706" "CC=arm-xilinx-eabi-gcc" "CFLAGS=-DMMC_SUPPORT"