Modified index.html file in example folder.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Srikanth Vemula <svemula@xilinx.com>
The user needs to implement Dptx_ConfigureAudioSrc and Dptx_AudioSendInfoFrame
as these functions are application-specific.
Signed-off-by: Andrei-Liviu Simion <andrei.simion@xilinx.com>
- General clean-up and commenting.
- Added comment documentation to the examples, as well as some general
information in xdptx.h.
- Examples now identify the CPU architecture using the existence of
XPAR_INTC_0_DEVICE_ID from the xparameters.h instead of the __MICROBLAZE__
macro.
- Added and renamed some files for improved integration into SDK.
- Cleaned-up documentation and code for readability.
- No longer returning XST_INVALID_PARAMETER in lieu of asserts.
- Renamed TxConfig member of the XDptx structure to Config.
Signed-off-by: Andrei-Liviu Simion <andrei.simion@xilinx.com>
Fixed updating the command phase register twice for the
flash devices that require four address cycles.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
Added new APIs for offset compensation, clippling, clampling,
coefficients, throughput monitor and get version
Added examples
Signed-off-by: Shadul Shaikh <shaduls@xilinx.com>
Acked-by: Srikanth Vemula <svemula@xilinx.com>
When enabling slave monitor, clear FIFO, set to read mode and
set transfer size register to 0.
Disable NACK interrupt to avoid being interrupted on every retry.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Revert changes in existing version of driver. New minor version
needs to be created.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Added source files, integration files, self test example,
mdd and tcl files to cfa driver.
Signed-off-by: Shravan Kumar A <skumara@xilinx.com>
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Srikanth Vemula <svemula@xilinx.com>
Added source files, integration files, self test example,
mdd and tcl files to enhance driver.
Signed-off-by: Shravan Kumar A <skumara@xilinx.com>
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Srikanth Vemula <svemula@xilinx.com>
When enabling slave monitor, clear FIFO, enable read mode and clear
the transfer size register.
NACK interrupt should not be enabled as this will lead to the sw
being interrupted everytime a retry fails.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
This patch fixes issue of IAR compilation error of standalone BSP for cortexa9
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
Change CR_RESET_STATE defintion to include required bits to be set and
reset. When writing to the configuration register, read the register and
OR the required value to leave the reserved bits untouched.
Changes done in XQspiPs_Reset function and HW reset function.
The default value written was expanded to include setting hold bit and
using manual chip select (This is recommended and already explicitly
followed in all the examples).
Removed check for register values in selftest because a reset is done
in just the previous step where default values are already written.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
