This patch modifies assembly level barrier function definitions
in xpseudo_asm_iccarm.h for iar compiler to fix the compilation
error for coresight driver
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-By: Venkata Naga Sai Krishna Kolapalli <venkatan@xilinx.com>
This patch deduces correct drive number for SD based on which
SD instance(s) are in design and the boot mode used.
Signed-off-by: Sarat Chand Savitala <saratcha@xilinx.com>
Acked-by: Krishna Chaitanya Patakamuri <kpataka@xilinx.com>
QEMU doesn't model PMU in signle arch. Since, in FSBL,
it couldn't be determined if QEMU is of single or
multi arch, for now skipping power-up request for both cases.
Signed-off-by: Sarat Chand Savitala <saratcha@xilinx.com>
Acked-by: Krishna Chaitanya Patakamuri <kpataka@xilinx.com>
This reverts commit 73154541df.
Linker script was modified to work-around a bootgen issue with handling
multiple loadable sections. Now this issue is fixed in bootgen (PR#875808).
So reverting the commit.
This patch points to the correct readbuffer index value
in SendBankSelect API, when bank register read command
is issued for a SPANSION device in 24-bit mode.
Signed-off-by: RamyaSree <rdarapun@xilinx.com>
Acked-by: Sarat Chand Savitala <saratcha@xilinx.com>
As RSA enable and PPK revoke bits are having each 2 bits
in secure control register XilSKey_ZynqMp_EfusePs_ReadSecCtrlBits
API also returns status of 2 bits so added BOTH_BITS_SET in place
of TRUE.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
While reading secure control bits from efuse array previously
it is returning only one bit status but now modified to get
two bits of secure control bit register for RSA enable and
PPK hash revokes.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
It is observed that when the C stack in put in TCM, ECC errors
get reported resulting in data abort.
This patch disables TCM ECC check temporarily before we come
to a proper conclusion regarding how to handle this use case.
Since we expect users to run code in R5 TCM, this patch removed
ECC check for TCMs to avoid data aborts.
Signed-off-by: Anirudha Sarangi <anirudh@xilinx.com>
Acked by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
FSBL configures the UART baud rate, MIOs and Clocks. UART init code in FW is
not fully functional and in some cases may interfere with settings done by FSBL.
So skip UART init in PMUFW to avoid conflicts.
Signed-off-by: Jyotheeswar Reddy <jyothee@xilinx.com>
Acked-by: Sarat Chand Savitala <saratcha@xilinx.com>
Acknowledge DMA transfer is complete by clearing DONE status.
This will make sure that the next transfer doesn’t assume DONE when it isn’t.
Signed-off-by: Sarat Chand Savitala <saratcha@xilinx.com>
Acked-by: Krishna Chaitanya Patakamuri <kpataka@xilinx.com>
This patch corrects the logic used to trigger PMU_0 IPI.
Also added code to Enable PMU_0 IPI.
Signed-off-by: RamyaSree <rdarapun@xilinx.com>
Acked-by: Sarat Chand Savitala <saratcha@xilinx.com>
Added new lines in example prints.
Modified CRC calculation API name and
provided backward compatability.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
To program Bbram PS example is provided this example
doesnot require any input.h file it doesnot contain any control
bits to be programmed.
It has only one feature is to program AES key into BBRAM.
User can edit the macro XSK_ZYNQMP_BBRAMPS_AES_KEY with the key
to be programmed.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
To program efuse PS of Zynq MP user has to edit input.h file
in input.h file default all will be in FALSE sate which ever has to be
programmed need to be changed to TRUE.
In example after programming cache will be reloaded and keys will be
read from cache. If user wants read API can be changed to read from
efuse memory.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
Added BBRAM PS programming APIs for Zynq MP platform
In BBRAM there is no provision for saperate CRC check
CRC check can be performed only while programming AES key
So user no need to calculate CRC of key if they provide key
for programming CRC check will also be performed internally.
User can also make BBRAM key to Zero at any time.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
For ZynqMp platform's Efuse PS interface functions are added.
In efuse PS we can programm AES, User keys and PPK0, PPK1 hashs
SPK Id, JTAG user code and including some control bits.
If Tbits are not programmed some programming features can't be
programme, user no need to call any API to program this Tbits
they are programmed internally when you tried to program any
of the programming bits if Tbits are not programmed on efuse.
PPK hash accepts input in the form bootgen's hash output
user no need to change HASH.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
Modified CRC calculation API to calculate CRC of
ZynqMP efuse PS's AES CRC.
Added Ceil function to calculate ceil.
Added write and read registers APIs.
Modified Xilskey_CrcCalculation API to
XilSKey_CrcCalculation
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
This patch modifies the Makefile of xilsecure to
remove the compilation errors for IAR compiler.
Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch modifies the Makefile of xilisf to
remove the compilation errors for IAR compiler.
Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch modifies the xilflash Makefile to
remove the compilation error for IAR compiler.
Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch modifies the make file of xilffs to
remove the compilation error for IAR compiler.
Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
According to IEEE 1149.1 programming will start after
TCK toggle at higher edge of clock and will be ended at
RTI state change and followed TCK toggle.
So JtagWrite API is modified accordingly.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
DFT JTAG disable and DFT mode disable control bits
programming and reading from status register are added
to efuse example and also input macros in xilskey_input.h
file.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
DFT control bits of efusePS for Zynq Platform is
added.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Reviewed-by: Harini Katakam <harinik@xilinx.com>
This patch updates the IntelStmDevices list to support
Micron N25Q256A flash device.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Acked-by: Harini Katakam <harinik@xilinx.com>
Remove freertos from proc reporting supported OS as lwip echo server
only supports standalone.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
This patch modifies xpseudo_asm_iccarm.h to fix the compilation
when dsb, isb and dmb is used by modifying for correct
function definitions
Signed-off-by: Kinjal Pravinbhai Patel <patelki@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
Add error message in tcl since there is no support for PSU Microblaze.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Acked-by: Anirudha Sarangi <anirudh@xilinx.com>
